LAIA t-Pod Quad 22 User manual

Brand: LAIA

Model: t-Pod Quad 22

Category: Portable speakers

Type: User manual

LAIA t-Pod Quad 22 is a versatile audio conferencing solution that seamlessly integrates with your existing setup. Connect it to your PC via USB and enjoy crystal-clear audio thanks to multiple wireless omnidirectional microphones. The device's external speaker output interfaces allow you to connect additional speakers for an immersive sound experience. Whether you're hosting a conference call or conducting a training session, the LAIA t-Pod Quad 22 delivers exceptional audio quality and ease of use.

1 Product overview

2 Pack

3 Product features

Connected via the USB interface, Laia T-Pod Quad 22 can be mounted

with external loudspeaker output interfaces to output meeting audio in

real time. It is also mounted with multiple wireless omnidirectional

microphones for the overall pick-up and also with local microphone input

interfaces for ensuring an easy, fast and efficient arrangement of meeting.

4 Instructions for use

Determine the installation locations of the speaker and wireless

microphones, install the antenna on the speaker, connect it to the

computer with the USB cable, turn the volume knob to the minimum

position, connect the device to the power supply using its adapter and

turn on the power switch of the speaker. At all times, the indicator will be

on green and the device will be in a standby state.

User manual X1

LAIA t-Pod Quad 22

P/N: TPQ 22

User manual

Main unit and antenna X1

Audio cable and adapter X1

Main unit´s USB cable X1 Wireless speaker´s power

adapter X4

Power adapter for main unit X1

Wireless speaker X4

Press and hold the on/off key of each wireless microphone in turn. When the

green light is on, it means the devices have successfully connected

wirelessly to the speaker.

Communication between remote and local locations will be established over

the network instantly. During the call process, it is necessary to moderately

increase the volume of the speaker to adjust the sensitivity of the

microphone and clearly hear the voice of local and remote meeting places.

During the call, you can press the "Mute Microphone" button to mute the

wireless connection. Press the "Mic Mute" button again to turn off the mute

function and the red ring light will turn on again.

During the call, you can press the "Mute Speaker" button to mute the

wireless connection. Press the "Mute Speaker" button again to turn off the

mute function and the red ring light will turn on again.

When the device is used in local and conference rooms, you can connect an

external microphone via the 6.5mm jack.

Note: Note: This device is applicable for PC with Windows and other

operating systems. USB interface adopts USB1.1, USB2.0 or above; USB

cable is plug and play and does not need to install additional driver.

5 Installation and connection

As shown in the diagram, connect the external antenna first, then connect the

device via USB data cable, insert the main unit's power adapter plug into the

main unit's power input port, and then connect the power supply. Press the

power button on the main unit and the power indicator on the main unit will

turn red.

Before using the wireless microphone, it must be connected with the USB

power adapter to fully charge the battery. The wireless microphone's

charging indicator will light orange when charging and will turn off when the

battery is fully charged. When the main unit is connected wirelessly, the light

on the wireless microphone flashes red, indicating that the battery is low and

needs to be charged again.

Long press the power button of the wireless microphone until the green

indicator lights up, which means the wireless microphone is connected with

the main unit via wireless mode successfully. If this indicator flashes green,

you do not have a wireless connection to the main unit.

The installation distance between the main speaker and the wireless

microphone should not be more than 2 meters. The recommended

installation distance between wireless microphones is 1.5 meters.

7 Notes

In addition to this device, the PC connected to the network must not be

connected with another microphone and speaker at the same time to

avoid usage problems.

Connect the USB cable of the speaker correctly to the computer.

Improper use of USB for connection will cause malfunction.

After the device connects successfully, the default mode for playback

(output) and recording (input) will be in "Local Device Model" in the

sound and audio device properties, from panel option computer control.

Otherwise, you need to select again "Local device model" to confirm.

Keep the built-in battery of the equipment away from high temperatures

and fire/heat sources to avoid the risk of explosion.

Please do not try to repair the equipment, otherwise it may cause

electric shock or short circuit. If there is a problem and the equipment

needs to be repaired, please contact your dealer.

6 Equipment introduction

LAIA t-Pod Quad 22 User manual

Brand: LAIA

Model: t-Pod Quad 22

Category: Portable speakers

Type: User manual

Download PDF

report

LAIA t-Pod Quad 22 User manual

LAIA t-Pod Quad 22 User manual

Related papers

Other documents