INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future reference.
30CM DESK FAN
SDF-30-2
General Safety 4
Before first use 6
Product Overview 7
How To Use 8
Customer Support 12
CONTENTS
4
GENERAL SAFETY
Read this manual thoroughly before you start using the Fan.
Store this manual, the completed warranty card, your receipt and the product
packaging.
The safety precautions instructions reduces the risk of fire, electric shock and
injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
• Do not expose this product to rain or moisture as it may result in fire.
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
IMPORTANT INFORMATION
• The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the product. Dry location
use only.
• No naked flame source, such as candles, should be placed on the product.
• Do not use this fan with an extension cord, power adaptors or external timers.
• This product is not designed for commercial, industrial or outdoor use.
• Do not leave the fan unattended during use.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
• AIRFLOW - Make sure nothing is obstructing or blocking the airflow outlet at
the front of the fan, and the airflow intake which is the back of the fan.
• Do not insert an foreign objects into the fan grill opening as this may cause
damage to the appliance and lead to electric shock and/or a fire hazard.
5
GENERAL SAFETY (CONT.)
• If you notice any unusual odors or smoke around the unit, immediately
disconnect the unit from the immediately switch o the product and contact
the service center. Failure to do so may result in fire.
• When not using the unit for long periods of time or when you are
moving the unit. Please switch o the appliance.
• Please beware that Dust could accumulate over time on the unit and cause it
to generate heat and or deteriorate insulation, which in turn may result in an
electrical fire.
• To maintain the product do not use any chemical or cleaning agent or wet
cloth, please only ensure to utilize a dry cloth to wipe it down from marks or
dust and only after unplugging the product from the power socket.
• Please ensure to contact our call center for any repair or service required for
the products.
Please make sure upon positioning this product, the place is:
• Not wet or damp and Well ventilated.
• Placed on a stable surface to avoid product from tipping over.
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place this equipment in a confined space such as a bookcase or similar
unit. Allow 20cm above and 5cm spacing on both sides for proper ventilation.
• Do not place the Product near heat sources such as radiators, stoves or other
audio visual equipment that produce heat.
• Do not place small metallic objects near the unit.
• Do not use or store flammable or combustible materials near the unit. Doing so
may result in fire or explosion. Do not place any naked flame sources, such as lit
candles, cigarettes or incense sticks on top of the product.
6
GENERAL SAFETY (CONT.)
Before first use
• Unpack the fan and accessories and ensure all parts of the product are
undamaged and in good working order.
• Plastic wrapping can be a suocation hazard for babies and young
children, so ensure all packaging materials are out of their reach and
disposed of safely.
• Ensure the fan is not exposed to direct sunlight or placed near a
heater or other heat source.
Before installing this product, make sure your outlet voltage corresponds to
the voltage stated on the product rating label.
• Do not use a damaged power cord, plug or loose outlet.
Doing so may cause an electric shock.
• Do not plug several devices into the same outlet. Doing so may cause the out
let to overheat and start a fire. Make sure the outlet is readily accessible
during operation of the equipment.
• Do not bend, twist or kink the power cord excessively.
• Do not allow anything to rest on or roll over the power cord.
Doing so may cause a fire or an electric shock.
• Do not run the power cord near heat-producing appliances such as radiators,
stoves or irons. The excessive heat could melt the insulation and expose live
wires, resulting in fire or electric shock.
• Do not expose this product to water. The electrical insulation could be dam
aged and cause electrocution. Do not touch the unit when barefoot or parts of
your body are wet or damp. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
7
PRODUCT OVERVIEW
1. Front protective grill
2. Fan blade
3. Rear grill mounting nut
4. Rear protective grill
5. Motor shaft
6. Oscillating control
7. Body
8. Screw and nut for grill
9. Blade nut
10. Base
11. Speed control
12. Tighten – turn to anti-clockwise
13. Loosen- turn clockwise
14. Screw for base
15. Decorative ring
16. Buckle
8
HOW TO USE
PART 1:
1. Insert the Fan Body assembly into the base.
2. Under the base there are six buckle holes aligned to press down.
3. Tighten the screws fully in the base but do not over tighten.
PART 2: ASSEMBLY
1. Unscrew the spinner (blade knob) clockwise and the nut counter
clockwise and remove both of them.
2. Set the rear grille in the proper position with the handle up.
3. Screw on plastic nut tightly to attach rear grille.
4. Discard plastic sleeve on shaft.
5. Install the blade onto the shaft until the retaining pin fits into
the notch on the blade.
6. Screw spinner (blade knob) to the motor shaft counter clockwise
(tighten by turning to the left)
7. Use 3 screws to install the decorative ring in the middle of
front grill.
8. Mount Front Safety Grill onto Rear Grill by hanging the top hook
clip of front guard over the top of the Rear Grill. Close the clasps
all around the grill.
PART 3: OPERATION
• Place your fan on a level and dry surface.
• Plug the power cord into AC220-240V wall outlets.
9
HOW TO USE (Cont.)
SPEED CONTROL
Speed is controlled by the button switch.
(0=OFF, 1=Low, 2=Medium, 3= High).
To turn the fan on, press the desired button switch.
(1= Low, 2=Medium, 3= High).
OSCILLATION CONTROL
To make the fan oscillate, push down on the oscillation knob located on
the top of the motor housing. To stop the fan from oscillating, pull up on
the oscillation knob when the fan is in the desired position.
TILT CONTROL
The airflow can be adjusted upward or downward by tilting the fan head
as desired.
• UNPLUG the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the fan clean.
• DO NOT immerse the fan in water and never allow water to drip
into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean
the fan.
• Remove the Front Grille.
• Unscrew the Spinner (blade knob) by turning it CLOCKWISE
(REVERSE THREAD).
• Pull the Fan Blade away from the Motor Housing.
• Gently wipe the Fan Blade and Grilles with a damp cloth.
• Re-assemble the fan by following the steps on page 8.
10
If experiencing issues with your oven and isn’t operating correctly please
check the following pages for solutions to the problems. If none of the solutions
offered help solve the problem with your appliance then please contact our
call centre on info@ayonz.com
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
FAQS
SPECIFICATIONS
Ratings 220-240V ~ 50-60Hz, 35W
Dimensions 340 (w) x 240 (d) x 485 (h) mm
Weight Net: 1.6 kg / Gross: 2.0 kg
11
This page is left
blank intentionally.
12
CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
