(1)Top (2)End Panel (3)End Panel (4)Shelf (5)Back Panel (6)Bottom Rail (A)Dowel
(C)Cam Lock (D)Leg Leveller (p)Adhesive
Cam Cover
(E4)Wood Screw (S1)Corner Bracket
2PCS
18PCS+2
12PCS+1
12PCS+1
12PCS+1
(B)Cam Pin
4PCS
1PC 3PCS 18PCS+1
(B)
(B)
(A)
(D)
STEP 1
(1)
STEP 2
(2) (5)
(6)
(B)
12PCS+1
(G)Shelf Pin
(4)
(S1)
(G)
(C)
(E4)
(S7)Flat Brackct
2PCS
(M0)Cushion
4PCS
(M0)
Bookcase 42" H
SON-55
36 W ×14 D×42 H
Always lay components on A clean,
soft-cushioned surface during assembly.
"""
877-OSP-WORX
(677-9679)
1PC 1PC 1PC 1PC
(B)
(B)
(B)
(B)
(B)
STEP 3 STEP 4 STEP 5
STEP 6 STEP 7 STEP 8
STEP 9
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(B)
(B)
(B)
(B)
(B)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(D)
(M0)
(3)
(M0)
(M0)
(D)
(D)
(2)
(2)
(3)
(3)
(5)
(5)
(6)
(6)
(4)
(4)
(1)
(F)
(F)
1.Affix 1st wall-attachment bracket to the top of Bookcase,
at rear/center, using(2) SHORT screws.
2.Affix 2nd wall-attachment bracket to the wall,
using(2)wall anchors and(2) LONG screws.
Note: Locate the 2nd bracket 1/4” higher than the 1st
bracket(now located on the top of the bookcase). Align 2nd
bracket left/right with the 1st bracket.
3.Connect wall-attachment brackets with plastic cable tie.
(F)Wall-attachment kits
1PC
"""
877-OSP-WORX
(677-9679)
STEP 10
Bookcase 42" H
SON-55
36 W ×14 D×42 H
Always lay components on A clean,
soft-cushioned surface during assembly.
/
