Gigabyte MZ73-LM0 User manual

MZ73-LM0

AMD EPYC™ 9004 DP Server Board Gen5

User Manual

Rev. 2.0

MZ73-LM1

AMD EPYC™ 9004 DP Server Board Gen4

User Manual

Rev. 1.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of Giga Computing .

Changes to the specications and features in this manual may be made by Giga Computing

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without Giga Computing 's prior written permission.

Documentation Classications

In order to assist in the use of this product, Giga Computing provides the following types of documen-

tation:

 User Manual: detailed information & steps about the installation, conguration and use this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC rmware, rail-kit) compatible with this product.

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents

For More Information

For related product specications, the latest rmware and software, and other information, please visit

our website at: http://www.gigabyte.com.

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your Giga Computing representative or visit

http://esupport.gigabyte.com/ to create a new support ticket.

For any general sales or marketing enquires, you may message Giga Computing server directly by

email: server[email protected].

- 3 -

Table of Contents

Motherboard Layout ........................................................................................................5

MZ73-LM0(R2) ............................................................................................................ 5

MZ73-LM1(R1) ............................................................................................................ 7

Block Diagram .................................................................................................................9

MZ73-LM0(R2) ............................................................................................................ 9

MZ73-LM1(R1) ............................................................................................................ 9

Chapter 1 Hardware Installation ...................................................................................10

1-1 Installation Precautions .................................................................................. 10

1-2 ProductSpecications .................................................................................... 11

1-3 Installing and Removing the CPU and Heat Sink ........................................... 15

1-4 Installing and Removing Memory ................................................................... 16

1-4-1 12-ChannelMemoryConguration ........................................................................16

1-4-2 Installing and Removing the Memory Module .......................................................17

1-4-3 Processor and Memory Module Matrix Table .........................................................17

1-4-4 Memory Population Table ......................................................................................18

1-5 Installing and Removing the M.2 SSD Module ............................................... 19

1-6 Back Panel Connectors .................................................................................. 20

1-7 Internal Connectors ........................................................................................ 21

1-7-1 MZ73-LM0(R2) .......................................................................................................21

1-7-2 MZ73-LM1(R1) .......................................................................................................28

1-8 Jumper Settings ............................................................................................. 35

1-8-1 MZ73-LM0 ..............................................................................................................35

1-8-2 MZ73-LM1 ..............................................................................................................36

Chapter 2 BIOS Setup ..................................................................................................37

2-1 The Main Menu .............................................................................................. 39

2-2 Advanced Menu ............................................................................................. 42

2-2-1 Trusted Computing .................................................................................................44

2-2-2 PSP Firmware Versions ..........................................................................................45

2-2-3 Legacy Video Select ...............................................................................................46

2-2-4 AST2600SuperIOConguration ...........................................................................47

2-2-5 S5 RTC Wake Settings ...........................................................................................49

2-2-6 Serial Port Console Redirection .............................................................................50

2-2-7 CPUConguration ..................................................................................................54

2-2-8 PCI Subsystem Settings .........................................................................................55

2-2-9 USBConguration ..................................................................................................57

2-2-10 NetworkStackConguration ..................................................................................59

- 4 -

2-2-11 NVMeConguration ...............................................................................................60

2-2-12 SATAConguration.................................................................................................61

2-2-13 GraphicOutputConguration .................................................................................62

2-2-14 AMDMemCongurationStatus .............................................................................63

2-2-15 TlsAuthConguration ............................................................................................64

2-2-16 RAMDiskConguration .........................................................................................65

2-2-17 iSCSIConguration ................................................................................................66

2-2-18 Broadcom BCM57416 10GBASE-T Network Connection ......................................67

2-2-19 VLANConguration ................................................................................................73

2-2-20 MACIPv4NetworkConguration ...........................................................................74

2-2-21 MACIPv6NetworkConguration ...........................................................................75

2-3 AMD CBS Menu ............................................................................................. 76

2-3-1 CPU Common Options ...........................................................................................77

2-3-2 DF Common Options ..............................................................................................83

2-3-3 UMC Common Options ..........................................................................................89

2-3-4 NBIO Common Options ........................................................................................109

2-3-5 FCH Common Options .........................................................................................119

2-3-6 NTB Common Options .........................................................................................128

2-3-7 SOC Miscellaneous Control .................................................................................129

2-3-8 Workload Tuning ...................................................................................................131

2-3-9 CXL Common Options ..........................................................................................132

2-4 AMD PBS Menu ........................................................................................... 133

2-4-1 RAS ......................................................................................................................134

2-5 Chipset Setup Menu ..................................................................................... 136

2-5-1 North Bridge .........................................................................................................137

2-5-2 Fabric Resource ...................................................................................................138

2-6 Server Management Menu ........................................................................... 140

2-6-1 System Event Log ................................................................................................142

2-6-2 View FRU Information ..........................................................................................143

2-6-3 BMCNetworkConguration .................................................................................144

2-6-4 IPv6BMCNetworkConguration .........................................................................145

2-7 Security Menu .............................................................................................. 146

2-7-1 Secure Boot .........................................................................................................147

2-8 Boot Menu .................................................................................................... 149

2-9 Save & Exit Menu ......................................................................................... 151

2-10 BIOS Recovery ............................................................................................ 152

2-11 BIOS POST Beep code (AMI standard) ....................................................... 153

2-11-1 PEI Beep Codes ...................................................................................................153

2-11-2 DXE Beep Codes .................................................................................................153

- 5 -

Motherboard Layout

13 4 6

5

7

2

8

9

10

11

12

17

15

16

13

14

20

21

22

23

24

28

27

26

25

29

32

31

30

18

19

CPU1

CPU0

DIMM_P1_Q1

DIMM_P1_N0

DIMM_P1_M0

DIMM_P1_P0

DIMM_P1_O0

DIMM_P1_R0

DIMM_P1_T0

DIMM_P1_W0

DIMM_P1_X0

DIMM_P1_U0

DIMM_P1_V0

DIMM_P1_S0

DIMM_P0_B0

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_C0

DIMM_P0_D0

DIMM_P0_A0

DIMM_P0_K0

DIMM_P0_H0

DIMM_P0_G0

DIMM_P0_J0

DIMM_P0_I0

DIMM_P0_L 0

MZ73-LM0(R2)

- 6 -

Item Code Description

1 SW_ID ID Button with LED

2 VGA VGA Port

3 COM1 Serial Port

4 LAN1 10GbE LAN Port #1

5 LAN2 10GbE LAN Port #2

6 USB3_MLAN Sever Management LAN Port (Top)/USB 3.2 Gen1 Ports (Bottom)

7 ATX1 2x12 Pin Main Power Connector

8 P12V_AUX1 2x4 Pin 12V Power Connector

9 P12V_AUX2 2x4 Pin 12V Power Connector

10 PMBUS PMBus Connector

11 U2_P1_P0B MCIO Connector (PCIe Gen4)

12 U2_P1_P0A MCIO Connector (PCIe Gen4)

13 CPU0_FAN CPU0 Fan Connector

14 SLSAS_0 Slimline Connector#0 (SATAIII 6Gb/s Signal)

15 P12V_PCIE1 2x3 Pin 12V Power Connector

16 P12V_PCIE2 2x3 Pin 12V Power Connector

17 BAT Battery Socket

18 CPU1_FAN CPU1 Fan Connector

19 SYS_FAN4 System Fan Connector #4

20 SYS_FAN3 System Fan Connector #3

21 SYS_FAN2 System Fan Connector #2

22 SYS_FAN1 System Fan Connector #1

23 F_USB3 Front Panel USB 3.2 Gen1 Connector

24 FP_1 Front Panel Header

25 BP_1 HDD Backplane Board Connector

26 IPMB IPMB Connector

27 SPI_TPM TPM Connector

28 PCIe_1 PCIe x16 Slot #1(Gen5 x16)

29 PCIe_2 PCIe x16 Slot #2(Gen5 x16)

30 PCIe_3 PCIe x16 Slot #3(Gen5 x16)

31 PCIe_4 PCIe x16 Slot #3(Gen5 x16)

32 M2_0 M.2 Slot(PCIe Gen4 x4, Support NGFF-2280/22110)

- 7 -

13 4 6

5

7

2

8

9

10

11

12

17

15

16

13

14

20

21

22

23

24

28

27

26

25

29

32

31

30

18

19

CPU1

CPU0

DIMM_P1_Q1

DIMM_P1_N0

DIMM_P1_M0

DIMM_P1_P0

DIMM_P1_O0

DIMM_P1_R0

DIMM_P1_T0

DIMM_P1_W0

DIMM_P1_X0

DIMM_P1_U0

DIMM_P1_V0

DIMM_P1_S0

DIMM_P0_B0

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_C0

DIMM_P0_D0

DIMM_P0_A0

DIMM_P0_K0

DIMM_P0_H0

DIMM_P0_G0

DIMM_P0_J0

DIMM_P0_I0

DIMM_P0_L 0

MZ73-LM1(R1)

- 8 -

Item Code Description

1 SW_ID ID Button with LED

2 VGA VGA Port

3 COM1 Serial Port

4 LAN1 10GbE LAN Port #1

5 LAN2 10GbE LAN Port #2

6 USB3_MLAN Sever Management LAN Port (Top)/USB 3.2 Gen1 Ports (Bottom)

7 ATX1 2x12 Pin Main Power Connector

8 P12V_AUX1 2x4 Pin 12V Power Connector

9 P12V_AUX2 2x4 Pin 12V Power Connector

10 PMBUS PMBus Connector

11 U2_P1_P0B MCIO Connector (PCIe Gen4)

12 U2_P1_P0A MCIO Connector (PCIe Gen4)

13 CPU0_FAN CPU0 Fan Connector

14 SLSAS_0 Slimline Connector#0 (SATAIII 6Gb/s Signal)

15 P12V_PCIE1 2x3 Pin 12V Power Connector

16 P12V_PCIE2 2x3 Pin 12V Power Connector

17 BAT Battery Socket

18 CPU1_FAN CPU1 Fan Connector

19 SYS_FAN4 System Fan Connector #4

20 SYS_FAN3 System Fan Connector #3

21 SYS_FAN2 System Fan Connector #2

22 SYS_FAN1 System Fan Connector #1

23 F_USB3 Front Panel USB 3.2 Gen1 Connector

24 FP_1 Front Panel Header

25 BP_1 HDD Backplane Board Connector

26 IPMB IPMB Connector

27 SPI_TPM TPM Connector

28 PCIe_1 PCIe x16 Slot #1(Gen5 x16)

29 PCIe_2 PCIe x16 Slot #2(Gen5 x16)

30 PCIe_3 PCIe x16 Slot #3(Gen5 x16)

31 PCIe_4 PCIe x16 Slot #3(Gen5 x16)

32 M2_0 M.2 Slot(PCIe Gen4 x4, Support NGFF-2280/22110)

- 9 -

Block Diagram

MZ73-LM0(R2)

MZ73-LM1(R1)

- 10 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

- 11 -

Hardware Installation

1-2 Product Specications

Socket

Security

Form Factor E-ATX

304.8W x 335.2D (mm)

Socket

Security

CPU AMD EPYC™ 9004 series processor family

Dual processor, 5nm technology

Up to 128core, 256 threads per processor

cTDP up to 400W

Socket

Security

Socket 2 x LGA 6096

Socket SP5

Socket

Security

Chipset System on Chip

Socket

Security

Memory 24 x DIMM slots

DDR5 memory supported only

12-Channel memory architecture per processor

RDIMM modules up to 128GB supported

3DS RDIMM modules up to 256GB supported

Memory speed: Up to 4800 MHz

Socket

Security

LAN 2 x 10Gb/s BASE-T LAN ports (1 x Broadcom® BCM57416)

NCSI function supported

1 x 10/100/1000 management LAN

Socket

Security

Video Integrated in Aspeed® AST2600

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Socket

Security

SATA MZ73-LM0(R2)

1 x SlimSAS 4i with 4 x SATA 6Gb/s ports, from CPU_0

2 x MCIO 8i with 4 x Gen5 NVMe or 16 x SATA ports, from CPU_1

MZ73-LM1(R1)

1 x SlimSAS 4i with 4 x SATA 6Gb/s ports, from CPU_0

2 x SlimSAS 8i with 4 x Gen4 NVMe or 16 x SATA ports, from CPU_1

NOTE:

We reserve the right to make any changes to the product specications and product-related

information without prior notice.

- 12 -

Hardware Installation

Socket

Security

Expansion Slots MZ73-LM0(R2)

Slot_4: 1 x PCIe x16 (Gen5 x16 bus) slot. from CPU_0

Slot_3: 1 x PCIe x16 (Gen5 x16 bus) slot, from CPU_0

Slot_2: 1 x PCIe x16 (Gen5 x16 bus) slot, from CPU_1

Slot_1: 1 x PCIe x16 (Gen5 x16 bus) slot, from CPU_1

1 x M.2 slots:

- M-key

- PCIe Gen4 x4 from CPU_0

- Supports 2280/22110 cards

2x MCIO 8i with 4 x Gen5 NVMe or 16 x SATA ports, from CPU_1

MZ73-LM1(R1)

Slot_4: 1 x PCIe x16 (Gen4 x16 bus) slot. from CPU_0

Slot_3: 1 x PCIe x16 (Gen4 x16 bus) slot, from CPU_0

Slot_2: 1 x PCIe x16 (Gen4 x16 bus) slot, from CPU_1

Slot_1: 1 x PCIe x16 (Gen4 x16 bus) slot, from CPU_1

1 x M.2 slots:

- M-key

- PCIe Gen4 x4 from CPU_0

- Supports 2280/22110 cards

2 x SlimSAS 8i with 4 x Gen4 NVMe or 16 x SATA ports from CPU_1

- 13 -

Hardware Installation

Socket

Security

On-Board

Connectors

MZ73-LM0(R2)

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

2 x 6-pin ATX 12V power connectors

2 x MCIO 8i connectors

1 x M.2 slot

2 x CPU fan headers

3 x System fan headers

1 x USB 3.2 Gen1 header

1 x TPM header

1 x Front panel header

1 x HDD back plane board header

1 x PMBus connector

1 x IPMB connector

1xClearCMOSjumper

1xBIOSrecoveryjumper

1 x Buzzer

MZ73-LM1(R1)

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

2 x 6-pin ATX 12V power connectors

2 x SlimSAS 8i connectors

1 x M.2 slot

2 x CPU fan headers

3 x System fan headers

1 x USB 3.2 Gen1 header

1 x TPM header

1 x Front panel header

1 x HDD back plane board header

1 x PMBus connector

1 x IPMB connector

1xClearCMOSjumper

1xBIOSrecoveryjumper

1 x Buzzer

Socket

Security

Rear I/O

Connectors

2 x USB 3.2 Gen1

1 x VGA

1 x COM

2 x RJ45

1 x MLAN

1 x ID button with LED

Socket

Security

TPM 1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

- 14 -

Hardware Installation

Socket

Security

Board

Management

Aspeed® AST2600 management controller

GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard

HTML5 KVM

Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)

Sensor Reading History Data

FRU Information

SEL Log in Linear Storage / Circular Storage Policy

Hardware Inventory

FanProle

System Firewall

Power Consumption

Power Control

LDAP / AD / RADIUS Support

Backup&RestoreConguration

Remote BIOS/BMC/CPLD Update

Event Log Filter

User Management

Media Redirection Settings

PAM Order Settings

SSL Settings

SMTP Settings

Socket

Security

Operating

Properties

Operating temperature: 10°C to 40°C

Operating humidity: 8-80% (non-condensing)

Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)

Socket

Security

PSU Connectors 1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

1 x 6-pin ATX 12V power connector

- 15 -

Hardware Installation

1-3 Installing and Removing the CPU and Heat Sink

Follow these instructions to Install the CPU:

1. Loosen the captive screw securing the CPU cover.

2. Flip open the CPU cover.

3. Remove the CPU carrier from the CPU frame using the handle on the CPU carrier.

4. Using the handle on the CPU carrier insert the new CPU carrier with CPU installed into the CPU

frame.

NOTE: Ensure the CPU is installed in the CPU carrier in the correct orientation, with the triangle on

the CPU aligned to the top left corner of the CPU carrier.

5. Flip the CPU frame with CPU installed into place in the CPU socket.

6. Flip the CPU cover into place over the CPU socket.

7. Tighten the CPU cover screw to secure the CPU cover in place.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Unplug all cables from the power outlets.

• Disconnect all telecommunication cables from their ports.

• Placethesystemunitonaatandstablesurface.

• Open the system according to the instructions.

WARNING!

Failure to properly turn off the server before you start installing components may cause serious

damage. Do not attempt the procedures described in the following sections unless you are a

qualiedservicetechnician.

Note:

• Lock the CPU by using a Torx T20 screwdriver to tighten screw.

• The screw tightening torque: 13.5 ± 0.5 kgf-cm.

1

External cap

2

3

CPU

4

5

67

- 16 -

Hardware Installation

1-4 Installing and Removing Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

1-4-1 12-Channel Memory Conguration

This motherboard provides 24 DDR5 memory slots and supports 12-Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.

21

2121

CPU1

CPU0

DIMM_P1_Q1

DIMM_P1_N0

DIMM_P1_M0

DIMM_P1_P0

DIMM_P1_O0

DIMM_P1_R0

DIMM_P1_T0

DIMM_P1_W0

DIMM_P1_X0

DIMM_P1_U0

DIMM_P1_V0

DIMM_P1_S0

DIMM_P0_B0

DIMM_P0_E0

DIMM_P0_F0

DIMM_P0_C0

DIMM_P0_D0

DIMM_P0_A0

DIMM_P0_K0

DIMM_P0_H0

DIMM_P0_G0

DIMM_P0_J0

DIMM_P0_I0

DIMM_P0_L 0

- 17 -

Hardware Installation

1-4-2 Installing and Removing the Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module.

Be sure to install DDR5 DIMMs on to this motherboard.

Follow these instructions to install a DIMM module:

1. Insert the DIMM memory module vertically into the DIMM slot and push it down.

2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

3. Reverse the installation steps when you want to remove the DIMM module.

1

2

1-4-3 Processor and Memory Module Matrix Table

4 DIMM

Memory Q’ty

for each CPU

CPU1

1 DIMM

2 DIMM

6 DIMM

8 DIMM

12 DIMM

R0 M0P0 O0 S0 T0Q0 N0 U0 V0 W0 X0

10 DIMM

CPU0

F0 A0

D0 C0 G0 H0

E0 B0 I0 J0 K0 L0

V

V V

VV

V

VV V

VV V VV V

VV VV V VV V

V V VV VV V VV V

V

V V

VV

V

VV V

VV V VV V

VV VV V VV V

V V VV VV V VV V

- 18 -

Hardware Installation

Note:

• When only one DIMM per channel is used, it must be populated in memory slot DIMM1.

EPYC Memory Speed based on DIMM Population (One DIMM per Channel)

1-4-4 Memory Population Table

DIMM

Type

DIMM Population Max EPYC 9004

DDR5 Frequency (MT/s)

DIMM 0

RDIMM

1R (1 Rank) 4800

2R (2 Ranks) 4800

3DS RDIMM

2S2R (4 Ranks) 4800

2S4R (8 Ranks) 4800

2S8R (16 ranks) 4800

- 19 -

Hardware Installation

1-5 Installing and Removing the M.2 SSD Module

Follow the steps below to install an optional M.2 SSD module on your motherboard:

Step1. Insert the M.2 SSD module into the slot.

Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.

1

2

CAUTION

The position of the stand-off screw will depend on the size of the M.2 device. The stand-off screw

is pre-installed for 22110 cards as standard. Refer to the size of the M.2 device and change the

position of the stand-off screw accordingly.

- 20 -

Hardware Installation

1-6 Back Panel Connectors

uServer Management LAN Port

The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is

the dedicated LAN port for Server Management.

vUSB 3.2 Gen1 Ports

The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveetc.

wLAN Port #1

The Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the section

below for a description of the states of the LAN port LEDs.

xLAN Port #2

The Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the section

below for a description of the states of the LAN port LEDs.

yCOM1

zVGA Port

Connect to a monitor device.

{ID button with LED

Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.

LAN and ID Button LEDs

Link/Activity LED

Speed LED

LAN Port

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

ID button/LED:

10/100/1000 LAN LED:

State Description

Yellow On 1Gbps data rate

Green On 100Mbps data rate

Off 10Mbps data rate

State Description

Blue On Systemidenticationisactive

Off Systemidenticationisdisabled

10GbE LAN LED:

State Description

Yellow On 5Gbps, 2.5Gbps, 1Gps data rate

Green On 10Gbps data rate

Off 100Mbps data rate

1

234 5 67

Page is loading ...

Gigabyte MZ73-LM0, MZ73-LM1 User manual

Related papers

Other documents