ASRock Rack ROME2D16-2T User manual

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

User Manual

Version 1.0

Published July 2022

Version 1.0

Published March 2023

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or translated

in any language, in any form or by any means, except duplication of documentation by the

purchaser for backup purpose, without written consent of ASRock Rack Inc.

Products and corporate names appearing in this documentation may or may not be

registered trademarks or copyrights of their respective companies, and are used only for

identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock Rack. ASRock Rack assumes no responsibility

for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock Rack does not provide

warranty of any kind, either expressed or implied, including but not limited to the implied

warranties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for loss of

prots, loss of business, loss of data, interruption of business and the like), even if ASRock

Rack has been advised of the possibility of such damages arising from any defect or error

in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

is equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. ese limits are designed to provide

reasonable protection against harmful interference in a residential installation. is

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. If you require assistance please call ASRock

Rack Tel : +886-2-55599600 ext.123 (Standard International call charges apply)

ASRock Rack INC. hereby declares that this device is in compliance with the essential

requirements and other relevant provisions of related UKCA Directives. Full text of UKCA

declaration of conformity is available at: http://www.asrockrack.com

ASRock Rack INC. hereby declares that this device is in compliance with the essential re-

quirements and other relevant provisions of related Directives. Full text of EU declaration

of conformity is available at: http://www.asrockrack.com

ASRock Rack follows the green design concept to design and manufacture our products,

and makes sure that each stage of the product life cycle of ASRock Rack product is in line

with global environmental regulations. In addition, ASRock Rack disclose the relevant

information based on regulation requirements.

Please refer to https://www.asrockrack.com/general/about.asp?cat=Responsibility for

information disclosure based on regulation requirements ASRock Rack is complied with:

DO NOT throw the motherboard in municipal waste. is product has been

designed to enable proper reuse of parts and recycling. is symbol of the

crossed out wheeled bin indicates that the product (electrical and electronic

equipment) should not be placed in municipal waste. Check local regulations

for disposal of electronic products.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Unique Features 6

1.4 Motherboard Layout 7

1.5 Onboard LED Indicators 10

1.6 I/O Panel 12

1.7 Block Diagram 15

Chapter 2 Installation 19

2.1 Screw Holes 19

2.2 Pre-installation Precautions 20

2.3 Installing the CPU and Heatsink 21

2.4 Installation of Memory Modules (DIMM) 25

2.5 Expansion Slots (PCI and PCI Express Slots) 27

2.6 Onboard Headers and Connectors 28

2.7 Dr. Debug 34

2.8 Unit Identication purpose LED/Switch 40

2.9 Dual LAN and Teaming Operation Guide

(ROME2D16-2T / ROME2D16-2L+ / ROME2D16-2T/BCM only) 41

2.10 M.2 SSD Module Installation Guide 42

Chapter 3 UEFI Setup Utility 44

3.1 Introduction 44

3.1.1 UEFI Menu Bar 44

3.1.2 Navigation Keys 45

3.2 Main Screen 46

3.3 Advanced Screen 47

3.3.1 CPU Conguration 48

3.3.2 Chipset Conguration 49

3.3.3 Storage Conguration 52

3.3.4 ACPI Conguration 53

3.3.5 USB Conguration 54

3.3.6 Super IO Conguration 55

3.3.7 Serial Port Console Redirection 56

3.3.8 H/W Monitor 59

3.3.9 PCI Subsystem Settings 60

3.3.10 AMD CBS 61

3.3.11 AMD PBS 62

3.3.12 PSP Firmware Versions 63

3.3.13 Tls Auth Conguration 64

3.3.14 Network Stack Conguration 65

3.3.15 Instant Flash 67

3.4 Server Mgmt 68

3.4.1 System Event Log 69

3.4.2 BMC Network Conguration 70

3.4.2 BMC Tools 72

3.5 Security 73

3.5.1 Key Management 74

3.6 Boot Screen 78

3.6.1 CSM Parameters 80

3.7 Event Logs 83

3.8 Exit Screen 85

Chapter 4 Software Support 86

4.1 Download and Install Operating System 86

4.2 Download and Install Software Drivers 86

4.3 Contact Information 86

Chapter 5 Troubleshooting 87

5.1 Troubleshooting Procedures 87

5.2 Technical Support Procedures 89

5.3 Returning Merchandise for Service 89

Appendix A 90

ATX V12 Power Supply Areas 90

Power Supply Mapping Table 90

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

PB 1

English

Chapter 1 Introduction

ank you for purchasing ASRock Rack ROME2D16-2T / ROME2D16-NL / ROME2D16-

2L+ / ROME2D16-2T/BCM motherboard, a reliable motherboard produced under ASRock

Rack’s consistently stringent quality control. It delivers excellent performance with robust

design conforming to ASRock Rack’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contains introduction of the motherboard and step-by-step

guide to the hardware installation. Chapter 3 and 4 contains the conguration guide to BIOS

setup and information of the Soware Support.

1.1 Package Contents

• ASRock Rack ROME2D16-2T / ROME2D16-NL / ROME2D16-2L+ / ROME2D16-2T/

BCM Motherboard

(SSI EEB Form Factor: 12.0-in x 13.0-in, 30.5 cm x 33.0 cm)

• Quick Installation Guide

• 1 x SATA3 Cable (60cm)

• 1 x I/O Shield

• 2 x Screws for M.2 Sockets

If any items are missing or appear damaged, contact your authorized dealer.

Because the motherboard specications and the BIOS soware might be updated, the con-

tent of this manual will be subject to change without notice. In case any modications of

this manual occur, the updated version will be available on ASRock Rack website without

further notice. You may nd the latest memory and CPU support lists on ASRock Rack

website as well. ASRock Rack’s Website: www.ASRockRack.com

If you require technical support related to this motherboard, please visit our website for

specic information about the model you are using.

http://www.asrockrack.com/support/

2 3

English

1.2 Specications

ROME2D16-2T / ROME2D16-NL / ROME2D16-2L+ / ROME2D16-2T/BCM

MB Physical Status

Form Factor SSI EEB

Dimension 12'' x 13'' (30.5 cm x 33.0 cm)

Processor System

CPU Supports AMD EPYC™ 7003 /7002 Series Processors

Socket 2 AMD Socket SP3

ermal Design

Power

ermal 225W (240W cTDP), Power 280W

CPLD LCMXO3LF-1300C-5BG

System Memory

Capacity 16 DIMM slots

Type - Eight Channel memory technology (1DPC)

- Support DDR4 3200/2666/2400 RDIMM, LRDIMM, 3DS

and NVDIMM

DIMM Size Per

DIMM

- RDIMM: 64GB, 32GB, 16GB, 8GB

- LRDIMM: 256GB, 128GB, 64GB, 32GB

- 3DS: 32GB, 16GB, 8GB

- NV DIMM: 32GB

DIMM

Frequency

- RDIMM: 3200MHz

- LRDIMM: 3200MHz

- 3DS: 3200MHz

- NVDIMM: 2666MHz

Voltage 1.2V

Expansion Slot

PCIe 4.0 x16 Slot1: Gen4 x16 link (CPU0)

Slot3: Gen4 x16 link (CPU0)

Slot4: Gen4 x16 link (CPU1)

Slot5: Gen4 x16 link (CPU0)

Slot6: Gen3 x16 link (CPU1)

PCIe 4.0 x8 Slot2: Gen4 x8 link (CPU1) (Open-end)

Storage

SATA

Controller

EPYC 7003/7002: 4 x SATA3

M.2 2 (M2_1: M-key (PCIe4.0 x4), Type 2242/2280/22110 from

CPU0; M2_2: M-key (PCIe4.0 x4 or SATA 6Gb/s), Type

2242/2280/22110 from CPU0)

OCulink 2 (PCIe4.0 x4 or 4 SATA 6Gb/s)

SlimSAS 1 Low-Prole SlimSAS (PCIe4.0 x8 or 8 SATA 6Gb/s) (CPU0)

1 Low-Prole SlimSAS (PCIe4.0 x8 or 8 SATA 6Gb/s) (CPU1)

Note Low Prole SlimSAS from CPU0 supports PCIe only while

installing 2 processors

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

2 3

English

Ethernet

Interface ROME2D16-2T:

Gigabit LAN 100/1000/10000 Mb/s

ROME2D16-NL:

N/A

ROME2D16-2L+:

Gigabit LAN 10/100/1000 Mb/s

LAN ROME2D16-2T:

2 x RJ45 10GLAN by Intel®X550-AT2

1 x RJ45 Dedicated IPMI LAN port

- Supports Wake-On-LAN

- Supports Energy Ecient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- LAN1 Supports NCSI

ROME2D16-NL:

1 x RJ45 Dedicated IPMI LAN port

ROME2D16-2L+:

2 x RJ45 1GLAN by Intel®I350

1 x RJ45 Dedicated IPMI LAN port

- Supports Wake-On-LAN

- Supports Energy Ecient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- LAN1 Supports NCSI

ROME2D16-2T/BCM:

2 x RJ45 10GLAN by Broadcom 57416

1 x RJ45 Dedicated IPMI LAN port

- Supports Wake-On-LAN

- Supports Energy Ecient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- LAN1 Supports NCSI

Management

BMC Controller ASPEED AST2500 : IPMI (Intelligent Platform Management

Interface) 2.0 with Ikvm and vMedia support

IPMI Dedicated

GLAN

1 x Realtek RTL8211E for dedicated management GLAN

Features - Watch Dog

- NMI

4 5

English

Graphics

Controller ASPEED AST2500

VRAM DDR4 512MB

Rear Panel I/O

VGA Port 1 x D-Sub

USB 3.2 Gen1

Port

2 (USB 3.2 Gen1 at 5Gbps)

LAN Port ROME2D16-2T / ROME2D16-2L+:

- 2 + 1 (IPMI 2.0)

- LAN Ports with LED (ACT/LINK LED and SPEED LED)

ROME2D16-NL:

- 1 (IPMI 2.0)

- LAN Port with LED (ACT/LINK LED and SPEED LED)

UID Button/

LED

1

Internal Connector

Auxiliary Panel

Header

1 (includes chassis intrusion, location button & LED, front

LAN LED)

TPM Header 1

TPM_BIOS_

PH1

1

IPMB Header 1

Front VGA

Header

1

Fan Header 8 Fans (6-pin)

ATX Power 1 (24-pin) + 3 (8-pin)

USB 3.2 Gen1

Header

1 ( support 2 USB 3.2 Gen1 ports at 5Gbps)

Smbus from

BMC

2

NMI Header 1

SGPIO Header 4

Front Panel

Header

1

ClearCMOS 1 (short pad)

CPU_HSBP 1

OH/FanFail

LED

8 (only Fan Fail LED)

COM Header 1

System BIOS

BIOS Ty pe 32Mb AMI UEFI Legal BIOS

BIOS Features - Plug and Play (PnP)

- ACPI 2.0 Compliance Wake Up Events

- SMBIOS 2.8 Support

- ASRock Rack Instant Flash

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

4 5

English

Hardware Monitor

Temperature - CPU Temperature Sensing

- System Temperature Sensing

Fan - CPU/Rear/Front Fan Tachometer

- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

- CPU/Rear/Front Fan Multi-Speed Control

Voltage Voltage Monitoring: Vsoc,Vcpu, VCCM, VPPM, +1.8V,

+3V,+5V, +12V, BAT, +1.8VSB, +3VSB, +5VSB

Support OS

OS Microso® Windows®:

- Server 2016 (64 bit)

- Server 2019 (64 bit)

- Server 2022 (64 bit)

Linux®:

- RedHat Enterprise Linux Server Server 8.2 (64 bit) / 7.9

(64 bit)

- CentOs 8.2 (64 bit) / 7.9 (64 bit)

- SUSE SLES 15.2 (64 bit) / 12.5 (64 bit)

- UBuntu 20.04.4 (64 bit) / 18.04.5 (64 bit) / 16.04.7 (64 bit)

Hypervisor:

- VMWare ESXi 7.0 U1 / 6.7 U3

*Please refer to our website for the latest OS support list.

Environment

Temperature Operation temperature: 10°C ~ 35°C / Non operation

temperature: -40°C ~ 70°C

If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-

dows® Hardware Quality Lab (WHQL) certication tests. If you install the drivers only, it

will pass the WHQL tests.

is motherboard supports Wake from on Board LAN. To use this function, please make

sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager

> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is

enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard

LAN can wake up S5 under OS.

6 7

English

1.3 Unique Features

ASRock Rack Instant Flash is a BIOS ash utility embedded in Flash ROM. is con-

venient BIOS update tool allows you to update system BIOS without entering operat-

ing systems rst like MS-DOS or Windows®. With this utility, you can press the <F6>

key during the POST or the <F2> key to enter into the BIOS setup menu to access

ASRock Rack Instant Flash. Just launch this tool and save the new BIOS le to your

USB ash drive, oppy disk or hard drive, then you can update your BIOS only in a

few clicks without preparing an additional oppy diskette or other complicated ash

utility. Please be noted that the USB ash drive or hard drive must use FAT32/16/12

le system.

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

6 7

English

1.4 Motherboard Layout

ROME2D16-2T / ROME2D16-NL / ROME2D16-2L+ / ROME2D16-2T/BCM

ATXPWR1

VGA1

DDR4_I1 (64 bit, 288-pin module,)Blue

DDR4_J1 (64 bit, 288-pin module, Blue)

DDR4_K1 (64 bit, 288-pin module, Blue)

DDR4_L1 (64 bit, 288-pin module,)Blue

DDR4_P1 (64 bit, 288-pin module, Blue)

DDR4_O1 (64 bit, 288-pin module,)Blue

DDR4_N1 (64 bit, 288-pin module, Blue)

DDR4_M1 (64 bit, 288-pin module,)Blue

RoHS

DDR4_E1 (64 bit, 2-pin module,)88 Blue

DDR4_F1 (64 bit, 2-pin module, Blue)88

DDR4_G1 (64 bit, 2-pin module,)88 Blue

DDR4_H1 (64 bit, 288-pin module, Blue)

DDR4_D1 (64 bit, 2-pin module, Blue)88

DDR4_C1 (64 bit, 2-pin module, Blue)88

DDR4_B1 (64 bit, 2-pin module, Blue)88

DDR4_A1 (64 bit, 288-pin module,)Blue

PCIE2

PCIE4

PCIE6

PCIE3

PCIE1

ATX12V2

1

33.0cm (13.0 in)

30.5cm (12.0 in)

BIOS

ROM

UID1

CPU0

CPU1

FAN1

M2_1

NUT2242_1 NUT2280_1 NUT22110_1

PCIE5

1

FRNT_VGA1

BMC

ROM

34 57

128

9

10

11

12

13

14

45

48

USB3_3_4

CPU1_HSBP1

IPMI_LAN

USB 3.2 Gen1

T: USB1

B: USB2

LAN1

46

49

LAN2

1

TPM_BIOS_PH1

OCU1

M2_2

NUT2242_2 NUT2280_2 NUT22110_2

ATX12V1

SLIM2SLIM1

OCU2

FAN2

SATA_0

SATA_1

SATA_2

SATA_3

ATX12V3

BATTERY1

FAN3

FAN4

FAN5

FAN6

FAN7

FAN8

HDLED RESET

PLED PWRBTN

PANEL1

1

AUX_PANEL1

1

SATA_SGPIO4

1

SATA_SGPIO3

1

SATA_SGPIO1

1

SATA_SGPIO2

TPM1

1

IPMB_1

BMC_SMB_1

BMC_SMB_2

Dr.

Drbug

1

NMI_BTN1

1

COM1

ROME2D16-2T

CLRMOS1

25

262728293013132333435363738

44

4041

20

21

22

23

24

16

17

18

19

6

15

39

47

42

43

ROME2D16-2L+

(ROME2D16-2T /

only)

ROME2D16-2L+ /

ROME2D16-2T /BCM

ROME2D16-NL

ROME2D16-2T/BCM

8 9

English

No. Description

1 2 x 288-pin DDR4 DIMM Slots (DDR4_F1, DDR4_H1)*

2 2 x 288-pin DDR4 DIMM Slot (DDR4_E1, DDR4_G1)*

3Low-Prole SlimSAS Connector (SLIM1)

4 ATX 12V Power Connector (ATX12V1)

5 ATX 12V Power Connector (ATX12V2)

6 USB 3.2 Gen1 Header (USB3_3_4)

7 ATX Power Connector (ATXPWR1)

8 System Fan Connector (FAN1)

9Low-Prole SlimSAS Connector (SLIM2)

10 2 x 288-pin DDR4 DIMM Slots (DDR4_J1, DDR4_L1)*

11 2 x 288-pin DDR4 DIMM Slot (DDR4_I1, DDR4_K1)*

12 AMD Socket SP3 (CPU1)

13 2 x 288-pin DDR4 DIMM Slots (DDR4_M1, DDR4_O1)*

14 2 x 288-pin DDR4 DIMM Slot (DDR4_N1, DDR4_P1)*

15 OCuLink x4 Connector (OCU2)

16 System Fan Connector (FAN4)

17 System Fan Connector (FAN2)

18 SATA3 Connector (SATA_0)

19 SATA3 Connector (SATA_1)

20 SATA3 Connector (SATA_2)

21 SATA3 Connector (SATA_3)

22 System Fan Connector (FAN3)

23 ATX 12V Power Connector (ATX12V3)

24 System Fan Connector (FAN5)

25 System Fan Connector (FAN7)

26 System Panel Header (PANEL1)

27 System Fan Connector (FAN6)

28 Auxiliary Panel Header (AUX_PANEL1)

29 System Fan Connector (FAN8)

30 SATA SGPIO Connector (SATA_SGPIO3)

31 SATA SGPIO Connector (SATA_SGPIO4)

32 SATA SGPIO Connector (SATA_SGPIO1)

33 SATA SGPIO Connector (SATA_SGPIO2)

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

8 9

English

No. Description

34 TPM Header (TPM1)

35 Intelligent Platform Management Bus header (IPMB_1)

36 BMC SMBus Header (BMC_SMB_1)

37 BMC SMBus Header (BMC_SMB_2)

38 Non Maskable Interrupt Button (NMI_BTN1)

39 Clear CMOS Pad (CLRMOS1)

40 Serial Port Header (COM1)

41 Front VGA Header (FRNT_VGA1)

42 M.2 Socket (M2_2) (Type 2242 / 2280 / 22110)

43 M.2 Socket (M2_1) (Type 2242 / 2280 / 22110)

44 OCuLink x4 Connector (OCU1)

45 2 x 288-pin DDR4 DIMM Slots (DDR4_B1, DDR4_D1)*

46 2 x 288-pin DDR4 DIMM Slot (DDR4_A1, DDR4_C1)*

47 TPM-SPI Header (TPM_BIOS_PH1)

48 AMD Socket SP3 (CPU0)

49 Backplane PCI Express Hot-Plug Connector (CPU1_HSBP1)

*For DIMM installation and conguration instructions, please see p.25 (Installation of Memory Modules

(DIMM)) for more details.

10 11

English

1.5 Onboard LED Indicators

DDR4_I1 (64 bit, 288-pin module,)Blue

DDR4_J1 (64 bit, 288-pin module, Blue)

DDR4_K1 (64 bit, 288-pin module, Blue)

DDR4_L1 (64 bit, 288-pin module,)Blue

DDR4_E1 (64 bit, 2-pin module,)88 Blue

DDR4_F1 (64 bit, 2-pin module, Blue)88

DDR4_G1 (64 bit, 2-pin module,)88 Blue

DDR4_H1 (64 bit, 288-pin module, Blue)

DDR4_D1 (64 bit, 2-pin module, Blue)88

DDR4_C1 (64 bit, 2-pin module, Blue)88

DDR4_B1 (64 bit, 2-pin module, Blue)88

DDR4_A1 (64 bit, 288-pin module,)Blue

1

ROME2D16-2T

1

2

3

4

5

6

7

8910

DDR4_P1 (64 bit, 288-pin module, Blue)

DDR4_O1 (64 bit, 288-pin module,)Blue

DDR4_N1 (64 bit, 288-pin module, Blue)

DDR4_M1 (64 bit, 288-pin module,)Blue

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

10 11

English

No. Item Status Description

1FAN_LED1 Amber FAN1 failed

2FAN_LED2 Amber FAN2failed

3FAN_LED4 Amber FAN4 failed

4FAN_LED3 Amber FAN3 failed

5FAN_LED5 Amber FAN5 failed

6FAN_LED7 Amber FAN7 failed

7FAN_LED8 Amber FAN8 failed

8 SB_PWR1 Green STB PWR ready

9FAN_LED6 Amber FAN6 failed

10 BMC_LED1 Green BMC heartbeat LED

12 13

English

1.6 I/O Panel

ROME2D16-2T / ROME2D16-2T/BCM

2

3

16

45

No. Description No. Description

1 UID Switch (UID) 4 10G LAN RJ-45 Port (LAN1)**

2 USB 3.2 Gen1 Ports (USB3_1_2) 5 10G LAN RJ-45 Port (LAN2)**

3 LAN RJ-45 Port (IPMI_LAN)* 6 VGA Port (VGA1)

ROME2D16-NL

2

3

14

No. Description No. Description

1 UID Switch (UID) 3 LAN RJ-45 Port (IPMI_LAN)*

2 USB 3.2 Gen1 Ports (USB3_1_2) 4 VGA Port (VGA1)

ROME2D16-2T

ROME2D16-NL

ROME2D16-2L+

ROME2D16-2T/BCM

12 13

English

ROME2D16-2L+

2

3

16

45

No. Description No. Description

1 UID Switch (UID) 4 1G LAN RJ-45 Port (LAN1)***

2 USB 3.2 Gen1 Ports (USB3_1_2) 5 1G LAN RJ-45 Port (LAN2)***

3 LAN RJ-45 Port (IPMI_LAN)* 6 VGA Port (VGA1)

LAN Port LED Indications

*ere are two LED next to the LAN port. Please refer to the table below for the LAN port

LED indications.

Dedicated IPMI LAN Port LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yellow 100M bps connection

On Link Green 1G bps connection

ACT/LINK LED

SPEED LED

LAN Port

14 15

English

LAN Port LED Indications (ROME2D16-2T/ROME2D16-2T/BCM only)

**ere are two LED next to the LAN port. Please refer to the table below for the LAN port

LED indications.

10G LAN Port (LAN1, LAN2) LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 100Mbps connection or

no link

Blinking Orange Data Activity Orange 1Gbps connection

On Link Green 10Gbps connection

LAN Port LED Indications (ROME2D16-2L+ only)

***ere are two LED next to the LAN port. Please refer to the table below for the LAN

port LED indications.

1G LAN Port (LAN1, LAN2) LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection or

no link

Blinking Orange Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LE

D

LAN Port

ACT/LINK LED

SPEED LE

D

LAN Port

Page is loading ...

ASRock Rack ROME2D16-2T User manual

ASRock Rack ROME2D16-2T User manual

Related papers

Other documents