Baso BGA109 Series
The Baso BGA109 Series is an electrically operated gas valve designed for use with natural gas and LP gas at pressures up to 0.5 psi. It is commonly used in various applications such as heaters, wall furnaces, commercial cooking equipment, and outdoor fire pits.
The BGA109 Series can be mounted horizontally or vertically, with the solenoid coils pointed up (vertical) or in any position not exceeding 90° from the vertical. It is important to ensure that the gas flows through the valve body in the direction indicated by the "IN" on the valve body to prevent leakage.
The valve comes with both 3-tab and 2-tab electrical connections, allowing for easy wiring. It is non-polarity sensitive, meaning that the electrical connections can be made in either direction. The earth ground terminal is clearly labeled with the earth ground symbol.
Baso BGA109 Series
The Baso BGA109 Series is an electrically operated gas valve designed for use with natural gas and LP gas at pressures up to 0.5 psi. It is commonly used in various applications such as heaters, wall furnaces, commercial cooking equipment, and outdoor fire pits.
The BGA109 Series can be mounted horizontally or vertically, with the solenoid coils pointed up (vertical) or in any position not exceeding 90° from the vertical. It is important to ensure that the gas flows through the valve body in the direction indicated by the "IN" on the valve body to prevent leakage.
The valve comes with both 3-tab and 2-tab electrical connections, allowing for easy wiring. It is non-polarity sensitive, meaning that the electrical connections can be made in either direction. The earth ground terminal is clearly labeled with the earth ground symbol.
Baso BGA109 Series
The Baso BGA109 Series is an electrically operated gas valve designed for use with natural gas and LP gas at pressures up to 0.5 psi. It is commonly used in various applications such as heaters, wall furnaces, commercial cooking equipment, and outdoor fire pits.
The BGA109 Series can be mounted horizontally or vertically, with the solenoid coils pointed up (vertical) or in any position not exceeding 90° from the vertical. It is important to ensure that the gas flows through the valve body in the direction indicated by the "IN" on the valve body to prevent leakage.
The valve comes with both 3-tab and 2-tab electrical connections, allowing for easy wiring. It is non-polarity sensitive, meaning that the electrical connections can be made in either direction. The earth ground terminal is clearly labeled with the earth ground symbol.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI