2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. Front Runner
  8. RRAC013

Front Runner RRAC013 Installation guide

  • Hello! I've reviewed the user manual for the T-slot rubber RRAC013. This guide explains how to install the rubber beading into your rack's open channels, and covers its use in preventing object movement, reducing air whistling, and securing wiring. I'm ready to answer any questions you might have about its installation or features.
  • Where can the T-slot rubber be inserted?
    How do I insert the T-slot rubber?
    What are some uses for T-slot rubber?
1
()
B If this product came as part of your Rack Kit, refer to Instruction 2B on Page 2.
For further idea's on where to use the T-slot Rubber, please turn over the page.
-
T SLOT RUBBER BEADING RRAC013
INSTALL TIME: 2 mins
REV_A00
-
FITTING THE T SLOT RUBBER ONTO YOUR RACK
Decide where on the rack you would like to insert the
T-slot Rubber. The Rubber can be inserted into any of
the Open Channels as shown, be it the Side Profiles or
the Slats.
To insert the T-slot Rubber, pinch/squeeze the sides of
Rubber together, then push/roll the Rubber into the
Open Channel.
()
A
Pinch Pinch
Side View of T-slot
Rubber in Channel
Open
Channels
This Side Down
2
-
USES FOR The T SLOT RUBBER
REV_A00
()
A Prevent objects from moving on the Rack when securing or fastening and requires much less strapping
tension, thereby preventing damage.
Reduce air whistling by inserting the T-slot Rubber into the Open Channels on the Front of the Rack.
If your tent overhangs or is inline with the front of the Rack, it is recommended to insert T-slot Rubber
into the Top Channel.
()
B
()
C Secure and hide items like wiring in the Open Channels.
/