REED R2001 User manual

  • Hello! I have reviewed the user manual for the REED Instruments Infrared Thermometer R2001. This document provides information on the device's features such as non-contact temperature measurement, laser pointer, and display backlight. I'm ready to answer your questions regarding this device.
  • What is the temperature range of the device?
    What is the emissivity of the device?
    What is the optical resolution of the device?
    What is the accuracy of the device?
Model
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Instruction Manual
Infrared Thermometer
R2001
reedinstruments
www com
Warning
Do not point laser directly or indirectly (through reective surfaces) at eye.
Features
• Safelymeasuresurfacetemperaturesofhot,hazardousor
hard-to-reach objects without contact
• Userselectable°For°C
• Built-inlaserpointeridentiestargetarea
• 8:1DistancetoSpotSizeratio
• Fixedemissivitycovers90%ofallapplications
• AutomaticDatahold
• Displaybacklight
• Lowbatteryindicationwithautoshutoff
• Includesbattery
Specifications
TemperatureRange: -58to536°F(-50to280°C)
Accuracy:  ±2%or±2°C
Resolution:  1°For(°C)
ResponseTime:  ≤0.8s
Emissivity:  0.95Fixed
OpticalResolution:  8:1
SpectralResponse: 5to14μm
PowerSupply:  9V(included)
Dimensions:  5.7x2.1x1”(145x56x28mm)
Weight:   2.7oz(76g)
Instruments Description
1.LCDDisplay   5.Laser
2.BackLightButton  6.InfraredLens
3.LaserButton   7.MeasuringTrigger
4.°C/°FButton  8.BatteryCover
Display Description
1.LaserSignal
2.DataHoldIcon
3.LowBatterySymbol
4.°C/°FSymbol
5.CurrentTemperature
Optical Resolution Information:
1. Whentakingmeasurements,pointthermometertowardthede-
sired object and hold the trigger. The object should be larger than
thespotsize.
2. OpticalResolution:Asthedistancefromtheobjectincreases,the
measuringspotsizeareabecomeslarger.
3.
Fieldofview:Makesurethetargetislargerthantheunit’sspot
size.Thesmallerthetargetthecloseryoumustbe.Whenaccuracy
iscritical,makesurethetargetisatleasttwiceaslargeasthespot
size
.
4. Emissivity:Mostorganicmaterials,paintedoroxidizedsurfaces
haveanemissivityof0.95(pre-setintheunit).Inaccuratereadings
willresultfrommeasuringshinyorpolishedmetalsurfaces.To
compensate,coverthesurfacetobemeasuredwithmaskingtape
orblackpaint.Measurethecoveredsurfacewhenitreachesthe
sametemperatureasthematerialunderneath.
Introduction
Compact,ruggedandeasytouse.Justaimandpushthebutton,itreads
currentsurfacetemperaturesinlessthanasecondpressthetriggerto
displayreading&batteryicon.Releasethetriggerandthereadingwill
holdfor15seconds.
Howitworks
TheInfraredthermometermeasuresthesurfacetemperatureofanobject.
Theunit’sopticalsensoremits,reects,andtransmitsenergywhichis
collectedandfocusedontoadetector.Theunit’selectronicstranslatethe
informationintoatemperaturereadingwhichisdisplayedontheunit.
Cautions
Infraredthermometersshouldbeprotectedfromthefollowing:
1. EMF(electro-magneticelds)fromarcwelders,inductionheaters.
2. Thermalshock(causedbylargeorabruptambienttemperature
changes,itallows30minutesforunittostabilizebeforeuse).
3. Donotleavetheunitonornearobjectsofhightemperature.
Maintenance
1. Lenscleaning:Usecompressedairtoblowofflooseparticles,use
asoftbrushtoremovedebrisaway,andcleanitwithdampcotton
cloth.
2. Casecleaning:Cleanthecasewithadampsponge/clothandmild
soap.
3. Donotusesolventtocleanlens.
4. Donotsubmergetheunitinwater.
BatteryReplacement
1. Pullbatterycoverawayfromunit
2. Replacewithbatteryrespectingthepolarity9v.
ForserviceonthisoranyotherREEDproductorinformationonotherREEDproducts,
contactREEDInstrumentsatinfo@reedinstruments.com
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
/