ASRock Rack FH-C612NM Installation guide

Brand: ASRock Rack

Model: FH-C612NM

Type: Installation guide

ASRock Rack FH-C612NM is the latest addition to ASRock Rack’s server product line and features 12 DDR4 memory slots, 2 Gigabit LAN ports, and support for a wide range of storage devices, with six SATA3 ports, an M.2 slot, and two PCIe 3.0 x16 slots for graphics cards or other expansion cards. This server is powered by an Intel Xeon processor and has a number of features that make it ideal for use in high-performance computing environments, including support for ECC memory and remote management via IPMI 2.0.

Guide to SATA Hard Disks

Installation and RAID Conguration

1. Guide to SATA Hard Disks Installation ..............................2

1.1 Serial ATA (SATA) Hard Disks Installation ................2

2. GuidetoRAIDCongurations ...........................................3

2.1 Introduction of RAID .................................................3

 2.2 RAIDCongurationPrecautions ..............................6

 2.3 InstallingWindows®OSWithRAIDFunctions .........7

 2.4 ConguringaRAIDarrayUsingIntelRAIDBIOS ....8

1. Guide to SATA Hard Disks Installation

1.1 Serial ATA (SATA) Hard Disks Installation

IntelchipsetsupportsSerialATA(SATA)harddiskswithRAID

functions,includingRAID0,RAID1,RAID5,RAID10andIntel

RapidStorage.PleasereadtheRAIDcongurationsinthis

guidecarefullyaccordingtotheIntelsouthbridgechipsetthat

yourmotherboardadopts.YoumayinstallSATAharddiskson

thismotherboardforinternalstoragedevices.Thissectionwill

guideyouhowtocreateRAIDonSATAports.

2. GuidetoRAIDCongurations

2.1 Introduction of RAID

ThismotherboardadoptsIntelsouthbridgechipsetthatinte-

gratesRAIDcontrollersupportingRAID0/RAID1/IntelRapid

Storage/RAID10/RAID5functionwithfourindependentSe-

rialATA(SATA)channels.Thissectionwillintroducethebasic

knowledgeofRAID,andtheguidetocongureRAID0/RAID

1/IntelRapidStorage/RAID10/RAID5settings.

RAID

Theterm“RAID”standsfor“RedundantArrayofIndependent

Disks”,whichisamethodcombiningtwoormoreharddisk

drivesintoonelogicalunit.Foroptimalperformance,please

installidenticaldrivesofthesamemodelandcapacitywhen

creatingaRAIDset.

RAID 0 (Data Striping)

RAID0iscalleddatastripingthatoptimizestwo

identicalharddiskdrivestoreadandwritedata

inparallel,interleavedstacks.Itwillimprovedata

accessandstoragesinceitwilldoublethedata

transferrateofasinglediskalonewhilethetwo

harddisksperformthesameworkasasingle

drivebutatasustaineddatatransferrate.

WARNING!!

AlthoughRAID0functioncanimprovetheaccessperformance,

it does not provide any fault tolerance. Hot-Plug any HDDs of

theRAID0Diskwillcausedatadamageordataloss.

RAID 1 (Data Mirroring)

RAID1iscalleddatamirroringthatcopiesand

maintainsanidenticalimageofdatafromone

drivetoaseconddrive.Itprovidesdataprotection

andincreasesfaulttolerancetotheentiresystem

sincethediskarraymanagementsoftwarewill

directallapplicationstothesurvivingdriveasit

Intel Rapid Storage

TheIntelRapidStoragetechnologysupportedallowsyouto

createaRAID0andRAID1setusingonlytwoidenticalhard

diskdrives.TheIntelRapidStoragetechnologycreatestwo

partitionsoneachharddiskdrivetocreateavirtualRAID0

andRAID1sets.Thistechnologyalsoallowsyoutochange

theharddiskdrivepartitionsizewithoutlosinganydata.

RAID 10

RAID10isastripedcongurationwithRAID1segments

whosesegmentsareRAID1arrays.Thiscongurationhasthe

samefaulttoleranceasRAID1,andhasthesameoverhead

forfault-toleranceasmirroringalone.RAID10achieveshigh

input/outputratesbystripingRAID1segments.Insome

instances,aRAID10congurationcansustainmultiplesimul-

taneousdrivefailure.Aminimumoffourharddiskdrivesis

requiredforthissetup.

RAID 5

RAID5stripesbothdataandparityinformationacrossthreeor

moreharddiskdrives.AmongtheadvantagesofRAID5con-

gurationincludebetterHDDperformance,faulttolerance,and

higherstoragecapacity.TheRAID5congurationisbestsui-

tedfortransactionprocessing,relationaldatabaseapplications,

enterpriseresourceplanning,andotherbusinesssystems.Use

aminimumofthreeidenticalharddiskdrivesforthissetup.

2.2 RAID Congurations Precautions

1. PleaseusetwonewdrivesifyouarecreatingaRAID

0(striping)arrayforperformance.Itisrecommended

tousetwoSATAdrivesofthesamesize.Ifyouuse

twodrivesofdifferentsizes,thesmallercapacityhard

diskwillbethebasestoragesizeforeachdrive.For

example,ifoneharddiskhasan80GBstoragecapa-

cityandtheotherharddiskhas60GB,themaximum

storagecapacityforthe80GB-drivebecomes60GB,

andthetotalstoragecapacityforthisRAID0setis

120GB.

2. Youmayusetwonewdrives,oruseanexistingdrive

andanewdrivetocreateaRAID1(mirroring)array

fordataprotection(thenewdrivemustbeofthe

samesizeorlargerthantheexistingdrive).Ifyou

usetwodrivesofdifferentsizes,thesmallercapacity

harddiskwillbethebasestoragesize.Forexample,

ifoneharddiskhasan80GBstoragecapacityand

theotherharddiskhas60GB,themaximumstorage

capacityfortheRAID1setis60GB.

3. Pleaseverifythestatusofyourharddisksbeforeyou

setupyournewRAIDarray.

WARNING!!

  PleasebackupyourdatarstbeforeyoucreateRAIDfunctions.

  IntheprocessyoucreateRAID,thesystemwillaskifyouwant

  to“ClearDiskData”ornot.Itisrecommendedtoselect“Yes”,

  andthenyourfuturedatabuildingwilloperateunderaclean

  environment.

2.3 Installing Windows® OS With RAID Functions

IfyouwanttoinstallWindows®OSonyourSATAHDDswith

RAIDfunctions,pleasefollowtheproceduresbelow.

STEP 1: Set up UEFI.

A.EnterUEFISETUPUTILITYAdvancedscreen

StorageConguration.

 B.Set“SATAModeSelection”to[RAID].

STEP 2: Set RAID conguration.

Pleaserefertop.8-11ofthisdocumentforinstructionsonhow

tosetRAIDconguration.

STEP 3: Install Windows® OS on your system.

2.4 Configuring a RAID array Using Intel RAID

BIOS

Reboot your computer. Wait until you see the RAID software

promptingyoutopress<Ctrl+I>.

 Press<Ctrl+I>.Then,theIntelRAIDUtility-Create RAID

Volumewindowappears.

 IntheCreateVolumeMenu,underNameitem,pleasekey-ina

uniquenamewith1-16lettersforyourRAIDvolumethenpress

<Enter>.

 Use the up or down arrow keys to select your desired RAID

Level.YoumayselectRAID0(Stripe),RAID1(Mirror),RAID

5orRAID10foryourRAIDlevel.Press<Enter>,andthenyou

can select Strip Size.

If you selected RAID 0 (Stripe), use the up or down keys to

selectthestripesizeforyourRAID0arraythenpress<Enter>.

Theavailablevaluesrange from 8KBto128 KB.Thedefault

selection is 128 KB. The strip value should be chosen based

ontheplanneddriveusage.

•8/16KB-lowdiskusage

•64KB-typicaldiskusage

•128KB-performancediskusage

 Afteryousetdiskblocksize,press<Enter>tosetdisk

Capacity.

 AftersettingupCapacity,pleasepress<Enter>.

Press<Enter>undertheCreate Volumeitem.Theutility

promptsaconrmationmessageasbelow.

 Press<Y>tocompletethesetupofRAID.

Afterthecompletion,youwillseethedetailedinformationabout

theRAIDthatyousetup.

 PleasenotethatyouareonlyallowedtocreateoneRAID

partitionatatimeunderBIOS RAID environment. Ifyouwant

to create an extra RAID partition, please use the RAID utility

underWindowsenvironmenttocongureRAIDfunctionsafter

youinstallOS.

 Ifyouwant todeleteaRAIDvolume,pleaseselecttheoption

Delete RAID Volume,press<Enter>,andthenfollowthe

instructionsonthescreen.

ASRock Rack FH-C612NM Installation guide

ASRock Rack FH-C612NM Installation guide

ASRock Rack FH-C612NM Installation guide

Other documents