ASRock Rack EP2C612D16NM-2T Installation guide
- Type
- Installation guide
EP2C612D16NM / EP2C612D16NM-8R / EP2C612D16NM-2T / EP2C612D16NM-2T8R
Quick Installation Guide
www.asrockrack.com
EP2C612D16NM / EP2C612D16NM-8R
No. Description No. Description
1 USB 3.0 Ports (USB3_1_2) 4 LAN RJ-45 Port (IPMI_LAN1)
2VGA Port (VGA1) 5 1G LAN RJ-45 Port(LAN1)
3 Serial Port (COM1) 6 1G LAN RJ-45 Port (LAN2)
EP2C612D16NM-2T / EP2C612D16NM-2T8R
No. Description No. Description
1 USB 3.0 Ports (USB3_1_2) 4 LAN RJ-45 Port (IPMI_LAN1)
2VGA Port (VGA1) 5 10G LAN RJ-45 Port (LAN1)
3 Serial Port (COM1) 6 10G LAN RJ-45 Port (LAN2)
4
2
P/N: 15G065026100AK V1.0
Install the Server Board
Motherboard Layout
Jumper Cap On/O
The server board User's Manual is available for download from the ASRock Rack's ofcial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1Insert the server board into the chassis.
2Affix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When the jumper cap is placed on the pins, the
jumper is “Short”. If no jumper cap is placed on the
pins, the jumper is “Open”.
The illustration shows a 3-pin jumper whose pin1
and pin2 are “Short” when a jumper cap is placed on
these 2 pins.
I/O Panel
33.02 cm (13 in)
ATXPWR1
VGA1
DDR4_B2 (64 bit, 288-pin module, White)
DDR4_B1 (64 bit, 288-pin module, Blue)
DDR4_A2 (64 bit, 288-pin module, White)
DDR4_A1 (64 bit, 288-pin module, Blue)
1
EP2C612D16NM-2T8R
Intel
C612
DDR4_C1 (64 bit, 288-pin module, Blue)
DDR4_C2 (64 bit, 288-pin module, White)
DDR4_D1 (64 bit, 288-pin module, Blue)
DDR4_D2 (64 bit, 288-pin module, White)
DDR4_G1 (64 bit, 288-pin module, Blue)
DDR4_G2 (64 bit, 288-pin module ), White
DDR4_H1 (64 bit, 288-pin module ), Blue
DDR4_H2 (64 bit, 288-pin module ), White
DDR4_F2 (64 bit, 288-pin module, White)
DDR4_F1 (64 bit, 288-pin module, Blue)
DDR4_E2 (64 bit, 288-pin module, White)
DDR4_E1 (64 bit, 288-pin module, Blue)
RoHS
IPMI_LAN1
LAN2
MEZZ1
IPMB1
1
ATX12V1
FRNT_ FAN1
1
1
1
(NCSI)
1
CPU1
CPU2
1
HDLED RESET
PLED PWRBTN
PANEL1
1
1
AUX_PANEL1
USB_1_2
USB3_3_4
SPEAK ER
PSU_S MB1
FRONT _LE D_LAN 34
1
LAN1
1
BATTERY1
BUZZER1
1
SATA_5
SATA_4
SATA_1
SATA_3
SATA_0
SATA_2
SSATA_0_3 LSI_SAS_0_7
TPM1
1
PCIE7
(White)
COM1
PCIE6
(Blue)
PCIE2
(White)
Dr.
Debug
BMC_SMB1
1
1
11
FRNT_ FAN2
FRNT_ FAN3
ATX12V2
FRNT_FAN4
FRNT_FAN5
FRNT_FAN6
CPU2_FAN1
ME_RECOVERY1
CHASSIS_ID2
CHASSIS_ID1
NCSI_ SEL 1
CPU1_FAN1
PECI1
LSI
3008
30.48cm (12 in)
23
456 78910 11 12 1314 15 16 17
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
3739
40
42
4344
45
47
48
49
51
52
53
SPI_
CON1
Intel
X540
54
1
PMBUS_SEL_CLK1
PMBUS_SEL_DAT1
PMBUS_SEL_ALT1
1
1
SATA_SGPIO2
SATA_SGPIO1
BMC_SMB2
1
T 1R
Super
I/O
38
46
50
18
B 1U
BMC
2400
1
1
CHASSIS_ID3
41
USB 3.0
T: USB1
B: USB2
No. Description
1Speaker Header (SPEAKER1)
2 LAN LED Connector (LED_LAN34)
3 Vertical Type A USB 3.0 (USB3_5)
4 USB 3.0 Header (USB3_3_4)
5 USB 2.0 Header (USB_1_2)
6 Auxiliary Panel Header (AUX_PANEL1)
7 ATX Power Connector (ATXPWR1)
8SATA3 Connector (SATA_5)
9SATA3 Connector (SATA_4)
10 SATA3 Connector (SATA_1)
11 SATA3 Connector (SATA_3)
12 SATA3 Connector (SATA_0)
13 SATA3 Connector (SATA_2)
14 Mini-SAS Connector (SSATA_0_3)
15 Mini SAS HD Connector (LSI_SAS_0_7)
*Only for EP2C612D16NM-8R / EP2C612D16NM-2T8R
16 TPM Header (TPM1)
17 CPU 1 Fan Connector (CPU1_FAN1)
18 CPU PECI Mode Jumper (PECI1)
19 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2, White)
20 Front Fan Connector (FRNT_FAN1)
21 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1, Blue)
22 Front Fan Connector (FRNT_FAN2)
23 ATX 12V Power Connector (ATX12V1)
24 LGA 2011 CPU Socket R3 (Narrow ILM) (CPU1)
25 2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_D2, White)
26 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1, Blue)
27 2 x 288-pin DDR4 DIMM Slots (DDR4_E1, DDR4_F1, Blue)
28 2 x 288-pin DDR4 DIMM Slots (DDR4_E2, DDR4_F2, White)
29 Front Fan Connector (FRNT_FAN3)
30 Front Fan Connector (FRNT_FAN4)
31 Front Fan Connector (FRNT_FAN5)
32 Front Fan Connector (FRNT_FAN6)
33 LGA 2011 CPU Socket R3 (Narrow ILM) (CPU2)
34 ATX 12V Power Connector (ATX12V2)
35 2 x 288-pin DDR4 DIMM Slots (DDR4_H2, DDR4_G2, White)
36 2 x 288-pin DDR4 DIMM Slots (DDR4_H1, DDR4_G1, Blue)
37 CPU 2 Fan Connector (CPU2_FAN1)
38 Intelligent Platform Management Bus header (IPMB1)
39 ME Recovery Jumper (ME_RECOVERY1)
40 ermal Sensor Header (TR1)
41 Chassis ID3 Jumper (CHASSIS_ID3)
42 Chassis ID2 Jumper (CHASSIS_ID2)
43 Chassis ID1 Jumper (CHASSIS_ID1)
44 BMC SMBus Header 1 (BMC_SMB1)
45 BMC SMBus Header 2 (BMC_SMB2)
46 NCSI Mode Jumper (NCSI_SEL1)
47 Mezzanine Slot (MEZZ1)
48 PMBUS Mode Jumper (PMBUS_SEL_ALT1)
49 PMBUS Mode Jumper (PMBUS_SEL_DAT1)
50 PMBUS Mode Jumper (PMBUS_SEL_CLK1)
51 SATA SGPIO Connector 1 (SATA_SGPIO1)
52 SATA SGPIO Connector 2 (SATA_SGPIO2)
53 System Panel Header (PANEL1)
54 PSU SMBus (PSU_SMB1)
2 6
4
3 5
1
*15G065026100AK*
Note:
EP2C612D16NM-2T / EP2C612D16NM-2T8R:
Intel X540
EP2C612D16NM / EP2C612D16NM-8R:
Intel I350
(See Note)
3
EP2C612D16NM / EP2C612D16NM-8R / EP2C612D16NM-2T / EP2C612D16NM-2T8R
Quick Installation Guide
www.asrockrack.com
1G For EP2C612D16NM / EP2C612D16NM-8R
Speed LED Activity / Link LED
Status Description Status Description
O 10Mbps connection or
no link
O No link
Yellow 100Mbps connection Blinking Green Data Activity
Green 1Gbps connection On Link
10G For EP2C612D16NM-2T / EP2C612D16NM-2T8R
Speed LED Activity / Link LED
Status Description Status Description
O 100Mbps connection or
no link
O No link
Yellow 1Gbps connection Blinking Green Data Activity
Green 10Gbps connection On Link
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M bps connection or no
link
Blinking Yellow Data Activity Yellow 100M bps connection
On Link Green 1G bps connection
8LAN Port LED Indications
5
7
6
123
Open the socket levers and the
CPU socket cover.
Install the processor and close
the socket cover.
Close the socket levers. Remove
the CPU protection cap.
Install the CPU Fan and Heatsink
CPU_FAN
12
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
Install the Power Cables
11 Install the PCIE Card
1Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2Align the card connector with t he
slot and press firmly until the card is
completely seated on the slot.
Fasten the card to the chassis with the
screw.
3
IPMI LAN Port
1G/10G LAN Port
System Panel Auxiliary Panel
12 Headers
A
B
A
B
A
B
A
B
B
A
ACT/LINK LED
SPEED LED
LAN Port
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
Install the Processor
ACT/LINK LED
SPEED LED
LAN Port
Dr. Debug
Code Description
00 Please check if the CPU is installed correctly and then clear CMOS.
0d Problem related to memory, VGA card or other devices. Please clear CMOS, re-install the memo-
ry and VGA card, and remove other USB, PCI devices.
01 - 54
(except 0d),
5A- 60
Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the
problem still exists, please install only one memory module or try using other memory modules.
55 e Memory could not be detected. Please re-install the memory and CPU. If the problem still
exists, please install only one memory module or try using other memory modules.
61 - 91 Chipset initialization error. Please press reset or clear CMOS.
92 - 99 Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other
slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.
A0 - A7 Problem related to IDE or SATA devices. Please re-install IDE and SATA devices. If the problem
still exists, please clear CMOS and try removing all SATA devices.
b0 Problem related to memory. Please re-install the CPU and memory. If the problem still exists,
please install only one memory module or try using other memory modules.
b4 Problem related to USB devices. Please try removing all USB devices.
b7 Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the
problem still exists, please install only one memory module or try using other memory modules.
d6 e VGA could not be recognized. Please clear CMOS and try re-installing the VGA card. If the
problem still exists, please try installing the VGA card in other slots or use other VGA cards.
d7 e Keyboard and mouse could not be recognized. Please try re-installing the keyboard and
mouse.
d8 Invalid Password.
FF Please check if the CPU is installed correctly and then clear CMOS.
10
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
1
3V
3V
GND
GND
5V
5V
GND
PWROK_PS
5VSB
12V
12V
3V
3V
-12V
GND
PSON#
GND
GND
GND
5V
5V
5V
GND
N/A
12
24 13
4
8
1
5
+12V2
GND
4
8
1
5
+12V2
GND
9Install the Memory
123
Unlock a DIMM slot by
pressing the module clip
outward.
Insert the memory module. Lock the clip.
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
-
1
-
2
ASRock Rack EP2C612D16NM-2T Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ASRock Rack EP2C612D16NM-2T8R User manual
-
-
-
-
-
-
-
-
-