1
.
2
To avoid to yourself and/or property, we recommend someone assist youduring the door
reversal process.
injury
NOTE:
To take the door off it is necessary to tilt the
Appliance backward. You should rest the
Appliance on something solid, e.g. a chair just
below the top panel.
DO NOT lay the Appliance completely as
this may damage the coolant system.
Ensurethe Appliance is unpluggedandempty.
Adjust the two leveling feet to their highest
position.
We recommendyouhave someone to assist
you.
8mm socket screw driver
Phillips style screw driver
1. Upper Hinge Bracket
2. Adjustable Leveling Foot
3. Machine Screw
4. Bottom Hinge Bracket
Remove the upper hinge cover, then unscrew the upper screws of metal hinge bracket and take off the
hinge. Then take off the right side screw cover. Pull the appliance door upward to take it off.
Remove the screws and take out the lower hinge. Rotate counterclockwise to unscrew the hinge shaft.
Rotate the hinge shaft clockwise on the other side of the lower hinge to screw it in. Flip over the lower hinge
and fix it on the box and door body with screws.
REVERSING THE DOOR POSITION