2
Oset Bowl Adapter Bracket Setup
• Loosen the knob of the Oset Bowl Adapter
bracket to mount it on the Euro Adapter
Quick Lock (Not Included).
NOTE: Oset Bowl Adapters Bracket comes in
medium/long lengths - with 100mm bowls to
accommodate all industry standard uid heads.
• Secure the bracket using the ratchet knob.
• Now, insert the 100mm Fluid Head
(Not Included) into the Bowl Adapter.
• Insert the locking knob to the Fluid Head from
the boom and properly ghten it, as shown
in the image.
• Aach the quick-release plate (Not Included)
to the boom and ghten it using a
screwdriver.
• Then slide the camera (Not Included) onto
the uid head.
• Mount the Camera (Not Included) onto the
uid head and secure it using the locking
knob.
• The setup is ready!