2 . Set your destination
Press the MENU button to open the Simple Menu. Select Find with the joystick
and press the + button to open the Find address Page. Select Country with
the joystick and press + to open the virtual keyboard. To write the name of
the country insert a letter at a time and conrm with +. When the name is
complete, press Ent on the virtual keyboard and conrm with + to return to the
Find address page. Repeat this procedure to insert the City, Road, Zip/Post
code and, if necessary, the House number. When you have nished entering the
address, you can select GO to calculate the route, or Show on map to see it
on the map.
To clear a route press MENU, then select Clear route and press +.
3 . Explore the map
With Geosat 4 DRIVE you can consult the map just like in a normal atlas. Press
ESC to activate the cursor and then move around the map using the joystick,
automatically panning as the cursor touches the edge of the screen. Pressing
the + or – zooms the map in or out by one level per press or you can press and
hold the zoom keys to perform a fast, multiple zoom of the map. When you place
the cursor on any point of the map, a window will appear showing what type of
object it is and basic information about it.
To get additional information, press the joystick in its centre. Select Full info
on cursor from the Function Menu and conrm by pressing + to visualize the
Full info window.
To exit the cursor mode and go back to having your vehicle’s current position
shown in the middle of the screen, press the ESC key.
4 . Look for a Point of Interest (POI)
Press FIND to open the Find window. From nearest to cursor select the POI
with the joystick and conrm by pressing + to open the POI Categories page.
Select a category and press + to view the subcategories. Select a subcategory
and conrm with + to view the 14 nearest POI listed with an icon, name,
direction and distance in KM from the cursor.
Select the desired POI and press + to open the POI Info window which will
detail the address and the telephone number. Press MENU to open the Find
menu from which you can show the POI on the Map, set it as destination or
departure and much more.
5 . Insert a personal “Mark” on the Map
Using the Mark feature you can store the location of a place that you visit and
then return/navigate to it, at a later date. To store your current location, press
the joystick in its centre, then from the Function Menu, select Add Mark on
my position and conrm by pressing +. A Mark will then be created on your
current position. You can also create a Mark in any point of the map. Press ESC
to activate the cursor and move it with the joystick to the desired point on the
map. Then press the cursor in its centre to open the Function Menu select Add
Mark on cursor and conrm by pressing +.
It is also possible to edit a Mark: press MENU twice, select Mark List and conrm
by pressing +. The new marks you have crated are saved in the Personal folder
as default, but they can be moved to other folders. Select Personal and conrm
by pressing +. Select the desired Mark and press + to open the Mark option
Menu from which you can edit it, move it or set it as Home.
6 . Set a Mark as departure or destination
Press MENU twice to open the Main Menu, select Mark List and conrm by
pressing +. Select the desired folder and conrm by pressing +. Select the
desired Mark and press MENU to open the Mark List Menu. From this window
you can show the Mark on the map, set it as departure, destination or via point
(advanced options).
If you have set a Mark as Home, to set it as the destination, you simply have
to press MENU, select Set destination on home and calculate and conrm
by pressing +.
7 . Set the route options
Press the MENU button to open the Simple Menu. Select System Setup with
the joystick and press the + button to open the System Setup page. Move the
joystick right to select the routing folder and conrm by pressing +.
In this page it is possible to set the route preference: Fastest time (gives
priority to big fast owing streets), Shortest distance (gives priority to
shortcuts even if they are secondary streets), Fewer turns (gives priority to
the route with the fewer turns) or Off Road. Select Route preference and
conrm by pressing +, then select the desired option and conrm by pressing +.
In this page you can also choose whether to avoid or not; Toll roads, U turns,
Walkways, Ferry routes, unpaved roads, buil up areas and to activate or
deactivate the Turn details.
8 . Set your trip computer
Press MENU twice to open the Main Menu, select Set up data boxes and
conrm by pressing +. Select the data box you want to edit in the right side of
the screen and conrm by pressing +. Choose from the Data boxes elds list
the information you want to display and conrm by pressing +. Once all of the
Data Boxes are set, press ESC twice to return to the map display.
9 . Set the brightness and volume
Brightness: Geosat is equipped with a sensor for the automatic regulation of
brightness of the display. When it is used in the battery mode the brightness
is automatically reduced to optimize the battery consumption. To modify the
brightness press and hold PAGE for 2 seconds, the Brightness window will now
appear. Press + to deactivate the automatic control of brightness, then move
the joystick right or left to set the desired level. You can choose to activate/
deactvivate the auto night vision.
Volume: press FIND for 2 seconds to open the Volume window. Move the
joystick right or left to set the desired level.
10. Set the Advanced Menu
At the rst start Geosat is set with the Simple Menu as default, which is very
useful to insert quickly your rst destination. As you get to be an advanced user,
in any moment you can set the Advanced Menu, through which you can access
to more options for your route.
To set the Advanced Menu, press MENU, from the simple Menu select with the
joystick Advanced Menu and press the + button.
The new setting will be active at the following start. To come back to the simple
mode, press MENU, select with the joystick Simple Menu and press the +
button to conrm.
1
2
Magellan 210 User manual
Magellan eXplorist XL Reference guide
Magellan eXplorist 600 Owner's manual
Pioneer AVIC-80DVD User manual
Sanyo NV-E7000 - Portable GPS And Mobile DVD Entertainment System Operating instructions