KRAUS FUS-13803CH Installation guide

Brand
KRAUS
Model
FUS-13803CH
Category
Faucets
Type
Installation guide

This manual is also suitable for

The KRAUS FUS-13803CH is a widespread basin faucet with a sleek and modern design. It features a durable construction with metal handles and a ceramic cartridge for long-lasting performance. The faucet's high-arc spout provides ample clearance for washing hands and filling pots, while the aerator ensures a gentle and splash-free water flow. Easy to install with included instructions, the faucet is a perfect addition to any bathroom or kitchen.

The KRAUS FUS-13803CH is a widespread basin faucet with a sleek and modern design. It features a durable construction with metal handles and a ceramic cartridge for long-lasting performance. The faucet's high-arc spout provides ample clearance for washing hands and filling pots, while the aerator ensures a gentle and splash-free water flow. Easy to install with included instructions, the faucet is a perfect addition to any bathroom or kitchen.

INSTALLATION MANUAL
Coda 8” Widespread Basin Faucet
FUS-13803
www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc.
Thank you for purchasing Kraus
We would like to take this opportunity to thank you for your business with Kraus
USA. It is our sincere hope that you are completely satised with your experience.
We welcome any questions or comments you may have, and will be glad to assist
you in the future.
For more information about Kraus products, please visit our website at:
www.kraususa.com
Please register your new Kraus product at the following web address in order to
activate the warranty and receive the full benet of customer support:
www.kraususa.com/registration
Sincerely,
Kraus Customer Service Department
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to installing new
plumbing. Shut o angle stops
• Max countertop thickness: 1-3/8”
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
∅
1 3/4”
(
∅
45mm)
∅
1 15/16”
(
∅
50mm)
9/16”-18UNEF
27mm ~ 41.3mm
1 1/16” ~ 1 5/8”
∅
1 15/16”
(
∅
50mm)
12 7/16”
(316mm)
1 5/8”
(42.5 mm Max)
7A
8B
8C
8D
8A
7A
8B
8C
8D
8A
Adjustable Wrench Phillips Screwdriver
Safety Goggles
Bucket
Tools you will need:
A
B
C
D
E
F
G
O1
O2
O3
H
I
J
K
L
M
N
FUS-13803 Diagram and Parts List
A. Hot & Cold Handle
B. Base Metal Ring
C. Base O-Ring
(factory-installed in base metal ring)
D. Rubber Washer
E. Mounting Nut
F. Hot Valve
G. Spout
H. Base O-Ring
(factory-installed in base of spout)
I. Rubber Washer
J. Mounting Nut
K. T-Union Clip
L. T-Union
M. Waterlines
N. Cold Valve
O. Aerator Assembly
O1. Aerator Washer
O2. Aerator
O3. Aerator Cover
Faucet Dimensions
Faucet Dimensions
Lift Rod Drain
a
b
c
d
e
f
g
1
2
3
4
5
6
7
8
a. Drain Body
b. Rubber Washer
c. Concave Washer
d. Plastic Washer
e. Mounting Nut
f. Tailpipe Washer
g. Tailpipe
Dimensions
Diagram and Parts List
Step1: Remove mounting hardware from spout
Remove mounting nut (J), rubber
washer (I), and base O-ring (H)
from spout (G)
Step 2: Secure Spout
Install spout (G) through hole
in sink or countertop with base
O-ring (H) attached. Attach
rubber washer (I) and mounting
nut (J)
Step 3: Install spout
Adjust spout (G) to proper
position and tighten mounting
nut (J) with adjustable wrench.
Install t-union (L) onto supply line
of spout (G). Attach t-union clip (K)
to secure t-union (L)
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
Step 4: Remove hot & cold handles and base metal rings
Remove handle (A) and base
metal ring (B) from valve (N).
Insert valve (N) into predrilled
hole (Hot: Left, Cold: Right) from
underneath. Repeat steps for
second handle (A) and valve (F)
Secure base metal ring (B) and
handle (A) onto valve (N) from
above. Tighten mounting nut (E)
on valve (N) from underneath
with adjustable wrench until snug.
Repeat steps for second handle
(A) and valve (F)
Step 5: Secure valves
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
Step 6: Connect waterlines to faucet and main valve
Thread waterlines (M) to hot and cold valve (F & N) horizontally. Thread other
end of waterlines to t-union (L). Attach hot & cold supply lines (not included
with faucet) to valves (F & N) vertically
A. Hot Side: Left
B. Cold Side: Right
Secure other end of hot & cold supply lines to angle stops. Tighten all ends
with adjustable wrench until snug. Turn on angle stops and check for leaks
(DO NOT TURN ON FAUCET)
Please Note:
1. The faucet comes with waterlines (M). Supply lines are required to
attach to the angle stops (not included)
2. Recommended supply lines: 3/8 in. OD x 1/2 in. IPS
G
H
I
J
G
G
A
B
C
D
E
N
H
I
J
B
A
B
F
N
M
L
M
E
C
D
E
N
N
J
K
L
O1
O2
O3
a
a
b
b
c
c
d
d
e
e
e
f
g
g
f
g
a
a
b
b
c
c
d
d
e
e
e
f
g
g
f
g
a
a
b
b
c
c
d
d
e
e
e
f
g
g
f
g
• Remove tail pipe (g),
mounting nut (e), plastic washer
(d), and concave washer (c) from
drain body (a)
• Install drain body (a), with rubber
washer (b) attached, into the drain
hole. From underneath, attach
concave washer (c) (narrow end up),
plastic washer (d), and mounting
nut (e) to drain body (a). Secure
tightly to sink with an adjustable
wrench
• Tighten mounting nut (e) with
adjustable wrench until snug.
Thread tailpipe (g) onto drain body
(a) and hand-tighten
Step7: Install drain
Installer Tip: Make sure tailpipe
washer (f) is installed in tailpipe
a
a
b
b
c
c
d
d
e
e
e
f
g
g
f
g
Step 8: Flush faucet
Remove aerator assembly (O).
Loosen aerator cover (O3) with
adjustable wrench. Remove
aerator (O2) and aerator washer
(O1). Turn water on for 1 minute
to remove any debris. Reassemble
aerator assembly (O)
Step7: Install drain
• Connect tailpipe (g) to p-trap
O1
O2
O3
Replacement Part List - FUS-13803
1
17
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1. Metal Handle
2. Cartridge - HOT
3. Base Metal Ring
4. Base O-Ring
5. Rubber Washer
6. Mounting Nut
7. Hot Valve
8. Aerator Washer
9. Aerator
10. Aerator Cover
11. Rubber Washer
12. Mounting Nut
13. T-Union Clip
14. T-Union
15. Waterline
16. Cold Valve
17. Cartridge - COLD
1. Drain Cap
2. Drain Body
3. Rubber Washer
4. Concave Washer
5. Plastic Washer
6. Mounting Nut
7. Tailpipe Washer
8. Tailpipe
Replacement Part List - Lift Rod Drain
1
2
3
4
5
6
7
8
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under handles Hot or cold cartridge (2
or 17) may be loose
Remove H & C metal
handle (1). Tighten hot
or cold cartridge (2 or
17) with adjustable
wrench
Aerator drips or has
inconsistent water flow
pattern
Aerator (9) may be dirty
or not seated properly
Unscrew aerator cover
(10) with adjustable
wrench. Remove
aerator (9), and clean
out debris
Water will not shut off
completely
Hot or cold cartridge (2
or 17) may need to be
adjusted or replaced
Remove H & C metal
handle (1). Remove
hot or cold cartridge (2
or 17) with adjustable
wrench. Check for
cracks
Drain is leaking Washers may be
compromised or
installed incorrectly
Check washers to make
sure they are installed
correctly and not
cracked
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
1
10
279
10 31/32”
Minimum distance 90mm
Less than 90mm
Cold Water
32 3/32”
Ø35~Ø38
1
2
3
10
9
11
12
13
Hexagon Nut
Hot
Water
Cold
Water
2 3
1
4
5
7
6
8
4
5
6
7
8
Ø1 3/8”~
Ø1 1/2”
815
194
7 5/8”
Ø1 3/8~Ø1 1/2”
30˚
10
11
Close
Open
Left
Hot Water
Push
25˚
90˚
12
13
8
7
Ø35~Ø38
Max35
217
8 17/32”
Max1 3/8”
9
11
12
13
2
3
4
5
6
7
8
Codes/Standards Applicable:
KRAUS LIMITED LIFETIME WARRANTY
This product has been manufactured and tested to the highest quality standards
by Kraus USA Inc. (“Kraus”). We offer our customers thoughtfully crafted fixtures
& accessories, engineered for enduring performance over years of use.
WHO IS COVERED BY THE WARRANTY
This warranty extends to the original purchaser only. This warranty is not
transferable, between homes or owners and is only applicable to residential use.
WHAT IS COVERED BY THE WARRANTY
Kraus warranties this product against defects due to material or craftsmanship
error during the warranty period: Kraus will provide replacement parts at
no charge, or at its option, replace any product or part of the product that is
deemed defective, under normal installation, use, service and maintenance. If
Kraus is unable to provide a replacement and repair is not practical or cannot
be made in timely fashion, Kraus may elect to refund the purchase price in
exchange for the return of the product.
CONDITIONS AND EXCLUSIONS
Like other home fixtures, Kraus products will require light maintenance to
ensure proper function. We provide you with complete knowledge to perform
this maintenance and can also recommend resources if you are unable to fulfill
this service.
A. Kraus will not be responsible for product failures due to lack of maintenance
or proper use. Please read your care and maintenance documentation to deter-
mine the limits of proper use.
B. The original sales receipt, order number, and/or proof of purchase must be
presented at the time of the warranty claim, without exception, for this warranty
to be applied to all Kraus products.
NSF/ANSI 372
NSF/ANSI 61
ASME A112.18.1M
1.5GPM 5.7L/min maximum
GREEN
Water Eciency
LEAD FREE
I
A
P
M
O
R
&
T
TM
C. Kraus recommends installing all Kraus products with a licensed, professional
plumber. Kraus will not be held responsible for any damage or product failure
due to improper installation, misuse, or failure to use a licensed professional.
Please read your care and maintenance documentation to determine the limits
of proper use.
D. Commercial use will automatically void this warranty.
E. This warranty is not applicable to Kraus products purchased from an unau-
thorized seller. For a complete list of authorized sellers please visit http://www.
kraususa.com/where-to-buy.html
NONAPPLICABILITY OF THIS WARRANTY
By the purchase and use of our products, you agree that Kraus is not liable
for incidental, consequential or special damages associated with the return,
replacement, installation or use of your product. This includes freight costs,
cartridge replacement, labor, travel time, lost profit, home damages and other
contingent liabilities and costs (including, without limitation, costs associated
with experts, investigations, analyses, attorneys and other professionals and
services). The Kraus warranty is a comprehensive and explicit limit of liability,
and all items outside of it are not addressable by or the responsibility of
Kraus. Certain states have variances regarding implied warranties and in those
situations we remain fully compliant.
KRAUS USA Inc. makes no implication that products comply with any or all local
building or plumbing codes. It is the consumer’s responsibility to determine
local code compliance. This warranty extends to the original purchaser and first
consumer.
HELP LINE
For additional assistance at any point in the installation process, please call us at
1.800.775.0703 or email us at [email protected]
Our customer service hours are Monday – Friday, 9am – 8pm EST.
Be sure to visit our website at www.kraususa.com
www.kraususa.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

KRAUS FUS-13803CH Installation guide

Brand
KRAUS
Model
FUS-13803CH
Category
Faucets
Type
Installation guide
This manual is also suitable for

The KRAUS FUS-13803CH is a widespread basin faucet with a sleek and modern design. It features a durable construction with metal handles and a ceramic cartridge for long-lasting performance. The faucet's high-arc spout provides ample clearance for washing hands and filling pots, while the aerator ensures a gentle and splash-free water flow. Easy to install with included instructions, the faucet is a perfect addition to any bathroom or kitchen.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents