RIVUSS DANUBE FBL-400 Installation guide

Brand: RIVUSS

Model: DANUBE FBL-400

Type: Installation guide

Lead Free Solid Brass Faucet

Kerox Ceramic Cartridge From Hungary

Fanski Stainless Steel Waterlines

Neoperl Aerator 1.5GPM From Switzerland

max

1.37

1.18

1.96

11.6

9.29

6.69

Extended Single-lever lavatory faucet

Series - Danube

FBL-400

Fixing nut

O-ring

Mixer body

Thread pipe

Waterlines

We do NOT recommend to use any household cleaners to clean the

product. The product should be cleaned only with soapy water and rinsed

with clean water and dried with a soft cloth.

For more details please visit www.rivuss.com/support

1: Screw the waterlines into the inlet pipe of the faucet body, fit rubber

washer into the groove of the faucet body.

2: Pass waterlines and thread pipe through the table hole. Then twist

the fixing nut to the thread pipe. Adjust the mixer body and fix firmly.

Aerator

Cleaning

Maintenance

•

Before use: Unscrew the Aerator and allow the water to run freely for 5

minutes. Then screw the filter back in place.

•

Periodically: Unscrew the Aerator and remove. Rinse it with running

water until any loose debris is cleared. Then replace the Aerator and

tighten.

Shut off main water supply before main installation

RIVUSS DANUBE FBL-400 Installation guide

Brand: RIVUSS

Model: DANUBE FBL-400

Type: Installation guide

Download PDF

report

RIVUSS DANUBE FBL-400 Installation guide

RIVUSS DANUBE FBL-400 Installation guide

Other documents