WAGO I/O-SYSTEM 750-517 User manual

Brand: WAGO

Model: I/O-SYSTEM 750-517

Type: User manual

This manual is also suitable for

I/O-SYSTEM 750

Pos: 2 /Dokumentation allgemein/Einband/Einband Handbuch - Fronts eite 20 15 - mit Doc Var iabl en ( Sta ndar d) @ 9\ mod_1285229289866_0.docx @ 64941 @ @ 1

WAGO-I/O-SYSTEM 750

Manual

750-455(/xxx-xxx)

4AI 4-

20mA S.E.

4-Channel Analog Input Module 4-20 mA, Single

ended

rsion 1.2.0

Pos: 3 /Al le Ser ien ( All ge mein e M odul e)/H in weis e z ur D oku men tati on/I mpr ess um für Sta ndar dh and büch er - al lg. A ngabe n, Ansc hrifte n, Telef onn ummer n und E-Mai l-A dresse n @ 3\mod_1219151118203_21.docx @ 21060 @ @ 1

2 WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail: [email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

=== Ende der Lis te f ür T ext mar ke Ei nb and _vor ne = ==

WAGO-I/O-SYSTEM 750 Table of Contents 3

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 5 /D oku ment ati on al lg emei n/V erz eic hnis se/ Inh alts verz ei chni s - Üb erschr ift oG u nd Verz eich nis @ 3\mod_1219151230875_21.docx @ 21063 @ @ 1

Table of Contents

1 Notes about this Documentation ................................................................. 5

1.1 Validity of this Documentation ................................................................. 5

1.2 Copyright ................................................................................................... 5

1.3 Symbols ..................................................................................................... 6

1.4 Number Notation ....................................................................................... 8

1.5 Font Conventions ...................................................................................... 8

2 Important Notes ........................................................................................... 9

2.1 Legal Bases ............................................................................................... 9

2.1.1 Subject to Changes ............................................................................... 9

2.1.2 Personnel Qualifications ....................................................................... 9

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying

Provisions ............................................................................................. 9

2.1.4 Technical Condition of Specified Devices ......................................... 10

2.2 Safety Advice (Precautions) .................................................................... 11

3 Device Description ..................................................................................... 13

3.1 View ........................................................................................................ 14

3.2 Connectors ............................................................................................... 15

3.2.1 Data Contacts/Internal Bus ................................................................. 15

3.2.2 Power Jumper Contacts/Field Supply ................................................ 16

3.2.3 CAGE CLAMP

Connectors ............................................................. 18

3.3 Display Elements .................................................................................... 19

3.4 Operating Elements ................................................................................. 20

3.5 Schematic Diagram ................................................................................. 21

3.6 Technical Data ........................................................................................ 22

3.6.1 Device ................................................................................................. 22

3.6.2 Supply ................................................................................................. 22

3.6.3 Communication .................................................................................. 22

3.6.4 Inputs .................................................................................................. 22

3.6.5 Connection Type ................................................................................ 23

3.6.6 Climatic Environmental Conditions ................................................... 23

3.7 Approvals ................................................................................................ 24

3.8 Standards and Guidelines ........................................................................ 26

4 Process Image ............................................................................................. 27

5 Mounting ..................................................................................................... 28

5.1 Mounting Sequence ................................................................................. 28

5.2 Inserting and Removing Devices ............................................................ 29

5.2.1 Inserting the I/O Module .................................................................... 29

5.2.2 Removing the I/O Module .................................................................. 30

6 Connect Devices ......................................................................................... 31

6.1 Connecting a Conductor to the CAGE CLAMP

................................... 31

6.2 Connection Example ............................................................................... 32

7 Use in Hazardous Environments .............................................................. 33

7.1 Marking Configuration Examples ........................................................... 34

7.1.1 Marking for Europe According to ATEX and IEC-Ex ...................... 34

4 Table of Contents WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

7.1.2 Marking for America According to NEC 500 .................................... 39

7.2 Installation Regulations ........................................................................... 40

7.2.1 Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX

554086 X) ........................................................................................... 41

7.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX

106032 X) ........................................................................................... 42

7.2.3 Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)43

7.2.4 Special Conditions for Safe Use (IEC-Ex Certificate IECEx TUN

12.0039 X) .......................................................................................... 44

7.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01 .. 45

List of Figures ...................................................................................................... 46

List of Tables ........................................................................................................ 47

=== Ende der Lis te f ür T ext mar ke V erzei c hnis _vor ne ===

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 7 /Al le S eri en ( Allg em ein e Mod ul e)/Ü bers chr ift en f ür al l e Ser ien/H i nweis e zur D ok ume ntati on /Hin wei se z u dies er D oku ment ati on - Ü ber schr if t 1 @ 4\ mod_1237987661750_21.docx @ 29029 @ 1 @ 1

1 Notes about this Documentation

Pos: 8 /Al le Ser ien ( All ge mein e M odul e)/H in weis e z ur D oku men tati on/H in weis e/Hi n weis : Do kum ent atio n a ufbe wahr e n @ 4 \mod_1237987339812_21.docx @ 29026 @ @ 1

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

Pos: 9 /Al le Ser ien ( All ge mein e M odul e)/Ü ber sc hrif ten für all e Ser ie n/Hi nwei se zur D o kume ntat ion /G ültig keit sb ereic h - Ü ber schri ft 2 @ 12\ mod_1338912448776_21.docx @ 96469 @ 2 @ 1

1.1 Validity of this Documentation

Pos: 10 /S eri e 7 50 ( WA GO-I/O- SYST EM) /Hi n weise z ur Do kum ent ati on/G ülti gkei ts berei ch/ Gül tig kei tsber ei ch D oku men tat ion Bus kle mme 7 50- xxx x, S tan dar dversi on un d au fgel ist ete V ari ant en @ 14\ mod_1358944038682_21.docx @ 109354 @ @ 1

This documentation is only applicable to the I/O module 750-455 (4AI 4-20mA

S.E.) and the variants listed in the table below.

Pos: 11 /Serie 750 (WAGO-I/O-SYST EM)/ Hi nweis e z ur D o kume ntati on/ Gül tig keits b ereic h/ Varia nt enli st en/V ari ant enlis te - 750- xxx - Standardversion und Variante /025-000 (er w eitert er T e mper at urber eic h) @ 9\mod_1281521920414_21.docx @ 63093 @ @ 1

Table 1: Variants

Item Number/Variant

Designation

750-455

4AI 4-20mA S.E.

750-455/025-000

4AI 4-20mA S.E./T

Pos: 12 /Al l e Ser ien (Al lg emei ne M od ule)/H i nweis e zur D okumentation/Hinweise/Hinweis: Gültigkeit der Angaben für aufgelistete Varianten @ 9\mod_1281520778141_21.docx @ 63085 @ @ 1

Documentation Validity for Variants

Unless otherwise indicated, the information given in this documentation applies to

listed variants.

Pos: 13 /Serie 750 (WAGO-I/O-SYST EM )/Hi n weis e zur D okum ent ati on/Hi n weise /Ac htu ng: Hin weis zur D oku ment ati on B uskl e mmen 750- xxxx @ 4\ mod_1237986979656_21.docx @ 29023 @ @ 1

The I/O module 750-455 shall only be installed and operated according to the

instructions in this manual and in the manual for the used fieldbus

coupler/controller.

Consider power layout of the WAGO-I/O-SYSTEM 750!

In addition to these operating instructions, you will also need the manual for the

used fieldbus coupler/controller, which can be downloaded at www.wago.com.

There, you can obtain important information including information on electrical

isolation, system power and supply specifications.

Pos: 14.1 /All e Seri en ( All ge meine Mo dul e)/Hi n weis e zur D oku ment ati on/U rh eber schu tz aus führ lich @ 4\mod_1235565145234_21.docx @ 27691 @ 2 @ 1

1.2 Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos: 14.2 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 14.3 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle Ser ie n/Hin wei se z ur D ok ume nta tion/ S ymbol e - Ü bers chr ift 2 @ 13\ mod_1351068042408_21. docx @ 105270 @ 2 @ 1

1.3 Symbols

Pos: 14 .4.1 /Al le Seri en ( All ge meine Mo dul e)/ Wic htig e Er läut eru nge n/ Sich erh eits- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschäden allgemein_ - Erläut erung @ 13\mod_1343309450020_21.docx @ 101029 @ @ 1

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 14 .4.2 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und sonsti ge Hinw eise/ Gefa hr/Gef ahr: _ Warnu ng vor Per sonen schä den durc h elek trisc hen Stro m_ - Erläuterung @ 13\mod_1343309694914_21.docx @ 101030 @ @ 1

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 14 .4.3 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und sonstige Hinweise/War nung /W arn ung: _W arn ung vor Per so nensc häd en al lg em ein_ - Erläuterung @ 13\mod_1343309877041_21.docx @ 101035 @ @ 1

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Pos: 14 .4.4 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und sonstige Hinwei se/V orsic ht/V orsich t: _War nung vor Pers onensc häden al lge mein_ - Erläuterung @ 13\mod_1343310028762_21.docx @ 101038 @ @ 1

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Pos: 14 .4.5 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und sonstige Hinweise/Achtung/Achtung: _War nu ng vor S ac hschä den all ge mein _ - Erläuterung @ 13\mod_1343310134623_21.docx @ 101041 @ @ 1

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 14 .4.6 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und so nsti ge H inw eis e/Ac htu ng/ Ach tung : _ War nung vor Sac hsc hä den durc h elektrostatische Aufladung_ - Erläuterung @ 13\mod_1343310227702_21.docx @ 101044 @ @ 1

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 14 .4.7 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und sonstige Hinweise/Hinweis/Hinweis: _Wichtiger Hinweis allgemein_ - Erläuterung @ 13\mod_1343310326906_21.docx @ 101047 @ @ 1

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in

damage to property.

Pos: 14 .4.8 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und so nsti ge H inw eis e/Inf or mat ion/I nf or matio n: _Wei ter e Inf or mati on allg emei n_ - Erl äuter ung @ 13 \mod_1343310439814_21.doc x @ 101051 @ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Additional Information:

Refers to additional information which is not an integral part of this

documentation (e.g., the Internet).

Pos: 14.5 /Dokumentation allgemein/Glieder ungs ele men te/---Sei te nwec hsel--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 14 .6 /All e Seri en (Allg emeine Modul e)/Hi nweis e zur Do kument ation /Zahl ensys teme @ 3\ mod_1221059454015_21.docx @ 21711 @ 2 @ 1

1.4 Number Notation

Table 2: Number Notation

Number Code

Example

Note

Decimal

100

Normal notation

Hexadecimal

0x64

C notation

Binary

'100'

'0110.0100'

In quotation marks, nibble separated with

dots (.)

Pos: 14.7 /All e Seri en ( All ge meine Mo dul e)/Hi n weis e zur Dokumentation/Schriftkonventionen @ 3\mod_1221059521437_21. docx @ 21714 @ 2 @ 1

1.5 Font Conventions

Table 3: Font Conventions

Font Type

Indicates

italic

Names of paths and data files are marked in italic-type.

e.g.: C:\Program Files\WAGO Software

Menu items are marked in bold letters.

e.g.: Save

A greater-than sign between two names means the selection of a

menu item from a menu.

e.g.: File > New

Input

Designation of input or optional fields are marked in bold letters,

e.g.: Start of measurement range

“Value”

Input or selective values are marked in inverted commas.

e.g.: Enter the value “4 mA” under Start of measurement range.

[Button]

Pushbuttons in dialog boxes are marked with bold letters in square

brackets.

e.g.: [Input]

[Key]

Keys are marked with bold letters in square brackets.

e.g.: [F5]

Pos: 15 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 9

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 16 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e Seri en/Wic htig e Erläut erung en/ Wichti ge Erlä uteru ngen - Üb ersc hrift 1 @ 4\ mod_1241428899156_21. docx @ 32170 @ 1 @ 1

2 Important Notes

Pos: 17.1 /All e Seri en ( All ge meine Do kum ente) ( Allg emei ne Mo dule) /Wi cht ige Erl äut eru nge n/Wi chti ge Erl äut eru nge n - Einl eit ung @ 3\mod_1221059818031_21.docx @ 21717 @ @ 1

This section includes an overall summary of the most important safety

requirements and notes that are mentioned in each individual section. To protect

your health and prevent damage to devices as well, it is imperative to read and

carefully follow the safety guidelines.

Pos: 17.2 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle Ser ie n/Wi chti ge Erl äuter u ngenR ec htlic he Gr undlag en - Üb ersc hrift 2 @ 3\ mod_1221060626343_21.docx @ 21726 @ 2 @ 1

2.1 Legal Bases

Pos: 17.3 /Alle Serien (Allgemeine Dokumente) ( Allgemei ne Module)/Wichtige Erläuterungen/Änderungs vorbehalt - Übersc hrift 3 un d In halt @ 3\ mod_1221060036484_21.docx @ 21720 @ 3 @ 1

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any

alterations or modifications that serve to increase the efficiency of technical

progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from

the granting of patents or from the legal protection of utility patents. Third-party

products are always mentioned without any reference to patent rights. Thus, the

existence of such rights cannot be excluded.

Pos: 17.4 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Pers onalq uali fikati onPer sonal quali fikat ion 750- xxxx - Ü bersc hrift 3 u nd Inh alt @ 3\mod_1224061208046_21.docx @ 24063 @ 3 @ 1

2.1.2 Personnel Qualifications

All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be

carried out by electrical specialists with sufficient knowledge in automation. The

specialists must be familiar with the current norms and guidelines for the devices

and automated environments.

All changes to the coupler or controller should always be carried out by qualified

personnel with sufficient skills in PLC programming.

Pos: 17.5 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Bestimmungsgemäße Verwendung Bestimmungsgemäße Verwendung 750-xxxx - Üb ers chrif t 3 un d In hal t @ 3 \mod_1224064151234_21.docx @ 24070 @ 3 @ 1

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with

Underlying Provisions

Fieldbus couplers, fieldbus controllers and I/O modules found in the modular

WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and

transmit them to actuators or higher-level control systems. Using programmable

controllers, the signals can also be (pre-) processed.

The devices have been developed for use in an environment that meets the IP20

protection class criteria. Protection against finger injury and solid impurities up to

12.5 mm diameter is assured; protection against water damage is not ensured.

Unless otherwise specified, operation of the devices in wet and dusty

environments is prohibited.

Operating the WAGO-I/O-SYSTEM 750 devices in home applications without

further measures is only permitted if they meet the emission limits (emissions of

interference) according to EN 61000-6-3. You will find the relevant information

in the section “Device Description” > “Standards and Guidelines” in the manual

for the used fieldbus coupler/controller.

10 Important Notes WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-

SYSTEM 750 in hazardous environments. Please note that a prototype test

certificate must be obtained that confirms the correct installation of the system in

a housing or switch cabinet.

Pos: 17.6 /All e Seri en ( All ge meine Mo dul e)/ Wic htig e Er läut eru nge n/T echni sc her Zus tan d d er G erät e - Ü bersc hrift 3 un d Inh alt @ 3\mod_1221060446109_21.docx @ 21723 @ 3 @ 1

2.1.4 Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software

configurations, which meet the individual application requirements. WAGO

Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of

changes in hardware or software as well as to non-compliant usage of devices.

Please send your request for modified and new hardware or software

configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Pos: 17.7 /Dokumentation al lge mei n/Gli eder ungs ele men te/---Sei te nwec hsel --- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 17 .8 /All e Seri en (Allg emeine Modul e)/Über schr ifte n für alle S erie n/Wich tige Er läuter ung enSic herhei tshi nweise - Über schri ft 2 @ 6\mod_1260180299987_21.docx @ 46 724 @ 2 @ 1

2.2 Safety Advice (Precautions)

Pos: 17.9 /All e Seri en ( All ge meine Do kum ente) ( Allg emei ne Mo dule) /Wi cht ige Erl äut eru nge n/Si cher hei tshi n weis e/Ei nl eitung S ich erhei tshin weis e Hard ware @ 6\mod_1260180170493_21.docx @ 46720 @ @ 1

For installing and operating purposes of the relevant device to your system the

following safety precautions shall be observed:

Pos: 17.1 0. 1 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /G efahr /G efahr : N ich t an Ger äte n unt er Spa nnung arbeite n! @ 6\mod_1260180365327_21.docx @ 46727 @ @ 1

Do not work on devices while energized!

All power sources to the device shall be switched off prior to performing any

installation, repair or maintenance work.

Pos: 17 .10. 2 /Serie 75 0 (WAG O-I/O-S YST EM) /Wic htig e Er l äuter ung en /Sic her hei ts- un d s onst ige H i nwei se/ Gef ahr/ Gefa hr: Ei nbau 07 50- xxxx nur in Geh äusen, Schrä nken oder ele ktrisc hen Betr iebsr äume n! @ 6\mod_1260180556692_21.docx @ 46731 @ @ 1

Install the device only in appropriate housings, cabinets or in electrical

operation rooms!

The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,

install the system and its components exclusively in appropriate housings,

cabinets or in electrical operation rooms. Allow access to such equipment and

fixtures to authorized, qualified staff only by means of specific keys or tools.

Pos: 17.1 0. 3 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /G efahr /G efahr : U nfal lv erh ütung sv orsc hri ften beachten! @ 6\mod_1260180657000_21.docx @ 46735 @ @ 1

Pos: 17.1 0. 4 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /G efahr /G efahr : A uf normg er echt e n Ansc hlu ss ac hten! @ 6 \mod_1260180753479_21.docx @ 46739 @ @ 1

Pos: 17.1 1. 1 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /Ac htu ng/Ac ht ung : Defek te oder besch ädigte G erät e austaus chen! @ 6\mod_1260180857358_21.docx @ 46743 @ @ 1

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed

contacts), since the long-term functionality of device/module involved can no

longer be ensured.

Pos: 17.1 1. 2 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /Ac htu ng/Ac ht ung : G erät e vor kriec hen den und i sol ier end en S to ffen s chütz en! @ 6\mod_1260181036216_21.docx @ 46747 @ @ 1

Protect the components against materials having seeping and insulating

properties!

The components are not resistant to materials having seeping and insulating

properties such as: aerosols, silicones and triglycerides (found in some hand

creams). If you cannot exclude that such materials will appear in the component

environment, then install the components in an enclosure being resistant to the

above-mentioned materials. Clean tools and materials are imperative for handling

devices/modules.

Pos: 17.1 1. 3 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /Ac htu ng/Ac ht ung : Rei nig ung nur mi t zul äss ige n M ater ial ien! @ 6\mod_1260181203293_21.docx @ 46751 @ @ 1

Clean only with permitted materials!

Clean soiled contacts using oil-free compressed air or with ethyl alcohol and

leather cloths.

Pos: 17.1 1. 4 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /Ac htu ng/Ac ht ung : Kei n K ont akts pra y verw end en! @ 6\ mod_1260181290808_21.docx @ 46755 @ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in

connection with contamination.

Pos: 17.1 1. 5 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wich tige Erl äuter u ngen /Sic her hei ts hinw eise /Ac htu ng/Ac ht ung : Ver pol ung ver mei de n! @ 6\mod_1260184045744_21.docx @ 46767 @ @ 1

Do not reverse the polarity of connection lines!

Avoid reverse polarity of data and power supply lines, as this may damage the

devices involved.

Pos: 17.1 1. 6 /Al le S eri en ( Allg em eine D o ku ment e) (Al lg emei ne M o dul e)/ Wichtig e Erlä uteru ngen/Si cher heits hinw eise/Ac htu ng/Ac htung : Elektr ostati sch e Entla dung ver meid en! @ 6\mod_1260181364729_21.docx @ 46759 @ @ 1

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge when touched. Please observe the safety precautions

against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the

devices, please ensure that environmental factors (personnel, work space and

packaging) are properly grounded.

Pos: 18 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 19 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e S eri en/G erä teb esc hreib ung /G erä tebe schr eib ung - Üb ersc hrift 1 @ 3\mod_1233756084656_21.docx @ 27096 @ 1 @ 1

3 Device Description

Pos: 20.1 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Einleitung/Anwendung/AI/Anwendung 750- 04xx AI SE (4...20mA) @ 5\mod_1245846703678_21.docx @ 35930 @ @ 1

The Analog Input Module 750-455 (4AI 4-20mA S.E.) processes analog signals

with the norm value of 4 mA ... 20 mA.

Pos: 20.2 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/Ei nlei tu ng/I/ O-Bes chr eibu ng/ AI/I /O- Beschr eib ung 750- 04xx 4 AI SE Fel ddsig nale über AI1 und M asse bz w. AI2/ 3/4 und M asse @ 5\ mod_1246370579270_21.docx @ 36366 @ @ 1

The module has 4 input channels. The signals of the field side may be received via

the CAGE CLAMP

connectors AI 1 and common (ground) or AI 2, AI 3, AI 4

and common (ground) each.

The common (ground) contacts of all 4 channels have 1 common 0 V ground

potential.

Pos: 20.3 /Serie 750 (WAGO-I/O-SYST EM) /G erät eb esc hrei bung /Ei nlei tu ng/F unk tio n/Gal vani sc he Tr en nung Ei ng angss ig nal/ Gal vanis ch e Tr en nung Eingangssignal/Systemebene (12 Bit) @ 6\mod_1255353269263_21.docx @ 42550 @ @ 1

The input signal is electrically isolated and is transmitted with a resolution of

12 bits.

Pos: 20.4 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/Ei nlei tu ng/L ED-A nzeig e/LE D F ehl er D ra htbr uch/ Ber eich sü ber- /unt erschr eitung @ 7\mod_1274363504640_21.docx @ 56902 @ @ 1

A red fault LED per channel indicates a wire break or that the signal is outside the

measuring range.

Pos: 20.5 /Serie 750 (WAGO-I/O-SYST EM)/ Ger äteb eschrei bung /Einl eitu ng/Ver sorg ung/An ordn ung unter Berüc ksich tigung der Lei stung skont akte bel iebig @ 3\mod_1233756233468_21.docx @ 27099 @ @ 1

With consideration of the power jumper contacts, the individual modules can be

arranged in any combination when configuring the fieldbus node. An arrangement

in groups within the group of potentials is not necessary.

Pos: 20.6 /Serie 750 (WAGO-I/O-SYST EM) /G erät eb esc hrei bung /Ei nlei tu ng/V ers org ung/ Spa nnu ngs vers org ung aus S yste mspa nnu ng @ 5\mod_1247116433759_21. docx @ 36920 @ @ 1

Power to the internal electronics is supplied via internal data bus.

Pos: 20.7 /Serie 750 (WAGO-I/O-SYST EM)/ Gerät ebesc hrei bung/Ei nlei tung /Vers orgung /Vers orgu ng 24 V, 0 V üb er Leis tungs konta kte _ Weit erga be ohne ei gene Verwen dung @ 16\mod_1379319855936_21.doc x @ 131620 @ @ 1

The I/O module receives the 24 V voltage supply and the 0 V potential for the

field level from an upstream I/O module or from the fieldbus coupler/controller

via the power jumper contacts used as blade contacts. These potentials are passed

through without being used galvanically isolated to subsequent I/O modules.

Pos: 20.8 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- u nd sonstig e Hin weis e/Acht ung/A chtu ng: Ma ximaler Strom L eistung skon takt e 10 A @ 3\mod_1226499143500_21.docx @ 25029 @ @ 1

Do not exceed maximum current via power jumper contacts!

The maximum current to flow through the power jumper contacts is 10 A.

Greater currents can damage the contacts.

When configuring your system, ensure that this current is not exceeded. If

exceeded, insert an additional supply module.

Pos: 20.9 /Serie 750 (WAGO-I/O-SYST EM) /G erät eb esc hrei bung /Ei nlei tu ng/Ei ns atz ber eich /Ei nsatz ber eic h 7 50- xxxx alle Ko ppl er/Ei ns atz berei ch 75 0-xx xx alle Kop pler /Contr oller ohne Economy-Koppler @ 3\mod_1232541867468_21.docx @ 26525 @ @ 1

The I/O module 750-455 can be used with all fieldbus couplers/controllers of the

WAGO-I/O-SYSTEM 750 (except for the economy types 750-320, -323, -324

and -327).

Pos: 20.1 0 /S eri e 7 50 (W AG O-I/O- SYST EM) /Ger äte beschr ei bung /Ei nleit ung/ I/ O-Bes chr eib ung /Allg em ein/ Ver weis a uf K apit el " Ans chl üss e" @ 8\mod_1276775378035_21.docx @ 57956 @ @ 1

The assignment of the connections is described in the “Connectors” section.

Pos: 20 .11 / Seri e 7 50 ( WAG O-I/ O-SYST EM) /Ger äte besc hrei bu ng/Ei nlei tung /I/ O-Be schr eib ung /All ge mein/ Ver wei s a uf K apit el " Ger ät e ansc hli eß en" > " Ansc hlus sb eispi el (e)" @ 5 \mod_1246015203281_21.docx @ 36298 @ @ 1

Connection examples are shown in section “Connecting Devices” > … >

“Connection Example(s)”.

Pos: 21 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

14 Device Description WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 22 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e S eri en/G erä teb esc hreib ung /A nsic ht - Ü ber schr if t 2 @ 4\ mod_1240984217343_21.docx @ 31958 @ 2 @ 1

3.1 View

Pos: 23 /S eri e 7 50 ( WA GO-I/O- SYST EM)/ Gerät ebesc hrei bung/A nsic ht/Anal ogei nga ngskle mmen/ Ansic ht 750-0455 @ 15\mod_1370334937962_21.docx @ 121639 @ @ 1

Figure 1: View

Pos: 24 /S eri e 7 50 ( WA GO-I/ O-SYS TEM )/ Ger äteb esc hrei bu ng/A nsic ht /Ansi c ht Cag eCl a mp®_ Leg ende mi t LED s @ 15\ mod_1370867188922_21.docx @ 122225 @ @ 1

Table 4: Legend for Figure “View”

Pos.

Description

Details See Section

Marking possibility with Mini-

WSB

---

Status LEDs

“Device Description” > “Display Elements”

Data contacts

“Device Description” > “Connectors”

CAGE CLAMP

connectors

“Device Description” > “Connectors”

Power jumper contacts

“Device Description” > “Connectors”

Release tab

“Mounting” > “Inserting and Removing

Devices”

Pos: 25 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 15

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 26 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e S eri en/G erä tebeschreibung/Anschlüsse - Übers chri ft 2 @ 4\mod_1240984262656_21.docx @ 31961 @ 2 @ 1

3.2 Connectors

Pos: 27 /S eri e 7 50 ( WA GO-I/O- SYST EM) /Ger ät ebesc hrei bu ng/A nschl üss e/Da ten ko ntakt e/Kl em menbu s - Ü bersc hrift 3 @ 6\mod_1256294684083_21.doc x @ 43660 @ 3 @ 1

3.2.1 Data Contacts/Internal Bus

Pos: 28.1 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/A nschl üss e/Da ten kon takt e - F eldbu sko ppler /-c ontr oll er, A bbi ld ung und Besc hrei bu ng @ 3\mod_1231771259187_21.docx @ 26002 @ @ 1

Communication between the fieldbus coupler/controller and the I/O modules as

well as the system supply of the I/O modules is carried out via the internal bus. It

is comprised of 6 data contacts, which are available as self-cleaning gold spring

contacts.

Figure 2: Data Contacts

Pos: 28.2 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- u nd so nstig e H in weis e/ Acht ung /Ach tu ng: Buskl em men nic ht a uf Gol dfe der konta kt e leg en! @ 7 \mod_1266318463636_21.docx @ 50695 @ @ 1

Do not place the I/O modules on the gold spring contacts!

Do not place the I/O modules on the gold spring contacts in order to avoid soiling

or scratching!

Pos: 28.3 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- und sonstige Hinweise/Achtung/Achtung: ESD - Auf gut e E rdung der U mg ebu ng ac hte n! @ 7\ mod_1266318538667_21. docx @ 50708 @ @ 1

Ensure that the environment is well grounded!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge. When handling the devices, ensure that the environment

(persons, workplace and packing) is well grounded. Avoid touching conductive

components, e.g. data contacts.

Pos: 29 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

16 Device Description WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 30 /S eri e 7 50 ( WA GO-I/O- SYST EM) /Ger ät ebesc hrei bu ng/A nschl üss e/L eist ung skont akt e/F eld versor gu ng - Üb ersc hrift 3 @ 6\ mod_1256294692864_21. docx @ 43664 @ 3 @ 1

3.2.2 Power Jumper Contacts/Field Supply

Pos: 31.1 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- u nd so nstig e H in weis e/ Vorsi cht/ V orsi cht: Ver letz ung sge fa hr dur c h sch arf kan tig e M esser ko nta kte! @ 6\ mod_1256193279401_21.docx @ 43414 @ @ 1

Risk of injury due to sharp-edged blade contacts!

The blade contacts are sharp-edged. Handle the I/O module carefully to prevent

injury.

Pos: 31.2 /Serie 750 (WAGO-I/O-SYST EM) /Ger äte besc hrei bu ng/A nschl üsse/Leistungskontakte 2 LK (Messer/Leistungskontakte 2 LK (Messer/Feder) - Einlei tung @ 15 \mod_1371721641099_21.docx @ 123714 @ @ 1

The I/O module 750-455 has 2 self-cleaning power jumper contacts that supply

and transmit power for the field side. The contacts on the left side of the I/O

module are designed as blade contacts and those on the right side as spring

contacts.

Pos: 31.3 /Serie 750 (WAGO-I/O-SYST EM)/ Gerät ebesc hrei bung/A nschl üsse /Leist ungs kont akte 2 LK (Messer/Leistungskontakte 2 LK (Messer/Feder) - Abbil dung, einfac he Brei te - Stan dard @ 15 \mod_1367500700037_21.docx @ 118396 @ @ 1

Figure 3: Power Jumper Contacts

Pos: 31.4 /Serie 750 (WAGO-I/O-SYST EM) /G erät eb esc hrei bung /Ans chl üss e/L eist ung s kont akte 2 LK (M ess er/ Leis tung s konta kte 2 L K (M esser /F ed er) - Leg ende @ 15 \mod_1371721352500_21.docx @ 123710 @ @ 1

Table 5: Legend for Figure “Power Jumper Contacts”

Contact

Type

Function

Spring contact

Potential transmission (U

) for field supply

Spring contact

Potential transmission (0 V) for field supply

Blade contact

Potential feed-in (0 V) for field supply

Blade contact

Potential feed-in (U

) for field supply

Pos: 31.5 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- u nd so nstig e H in weis e/ Acht ung /Ach tu ng: M a ximal er S tro m L eist ungs kon tak te 10 A @ 3\ mod_1226499143500_21.docx @ 25029 @ @ 1

Do not exceed maximum current via power jumper contacts!

The maximum current to flow through the power jumper contacts is 10 A.

Greater currents can damage the contacts.

When configuring your system, ensure that this current is not exceeded. If

exceeded, insert an additional supply module.

Pos: 31.6 /Serie 750 (WAGO-I/O-SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- u nd sonstig e Hin weis e/Hinw eis/Hi nwei s: Pote ntialei ns peise klemme f ür Erde ei nset zen! ( keine LK für Erde) @ 3\mod_1226499037468_21.doc x @ 25023 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Use supply modules for ground (earth)!

The I/O module has no power jumper contacts for receiving and transmitting the

earth potential. Use a supply module when an earth potential is needed for the

subsequent I/O modules.

Pos: 32 /D o kume ntat ion all gemei n/ Glie der ungs elem ente /---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 33 /S eri e 7 50 ( WA GO-I/O- SYST EM) /G erät eb eschr ei bung /Ans chl üss e/C AGE CL AMP- Ansc hlüs se - Ü b erschr if t 3 @ 6\ mod_1256296337770_21. docx @ 43674 @ 3 @ 1

3.2.3 CAGE CLAMP

Connectors

Pos: 34 /S eri e 7 50 ( WA GO-I/O- SYST EM) /G erät eb eschr ei bung /Ans chl üss e/A nal ogei nga ngs kle mm en/A nsc hlüs se 7 50- 0453, -0 455, - 0457 un d -0459 @ 15\mod_1370335893038_21.docx @ 121647 @ @ 1

Figure 4: CAGE CLAMP

Connectors

Table 6: Legend for Figure “CAGE CLAMP

Connectors”

Channel

Designation

Connector

Function

AI 1

Analog input1: Signal

Common

(ground)

Analog input: Common (ground)

AI 2

Analog input 2: Signal

Common

(ground)

Analog input: Common (ground)

AI 3

Analog input 3: Signal

Common

(ground)

Analog input: Common (ground)

AI 4

Analog input 4: Signal

Common

(ground)

Analog input: Common (ground)

Pos: 35 /S eri e 7 50 ( WA GO-I/O- SYST EM)/ Wicht ige Erl äuter unge n/Sich erhei ts- und sonstige Hinweise/Hinweis/Hinweis: Geschi r mte Sig nall eit ung en verw end en! @ 7\ mod_1265723251019_21.docx @ 50140 @ @ 1

Use shielded signal lines!

Only use shielded signal lines for analog signals and I/O modules which are

equipped with shield clamps. Only then can you ensure that the accuracy and

interference immunity specified for the respective I/O module can be achieved

even in the presence of interference acting on the signal cable.

Pos: 36 /D o kume ntat ion all gemei n/ Glie der ungs elem ente /---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 19

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 37 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e S eri en/G erä teb esc hreib ung /A nzei geel e ment e - Üb ersc hrift 2 @ 4\ mod_1240984390875_21.docx @ 31964 @ 2 @ 1

3.3 Display Elements

Pos: 38 /S eri e 7 50 ( WA GO-I/O- SYST EM)/ Gerät ebesc hrei bung/A nzeig eele mente /Anal ogei ngang sklem men/A nzeig eele mente 7 50-0455 @ 21\mod_1423226327425_21.docx @ 173708 @ @ 1

Figure 5: Display Elements

Table 7: Legend for Figure “Display Elements”

Channel

Designation

LED

State

Function

1 Error AI 1 A

Off

Normal operation

Red

Broken wire, excess/underflow

of the admissible measuring range

2 Error AI 2 C

Off

Normal operation

Red

Broken wire, excess/underflow

of the admissible measuring range

3 Error AI 3 B

Off

Normal operation

Red

Broken wire, excess/underflow

of the admissible measuring range

4 Error AI 4 D

Off

Normal operation

Red

Broken wire, excess/underflow

of the admissible measuring range

Pos: 39 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

20 Device Description WAGO-I/O-SYSTEM 750

750-455 4AI 4-20mA S.E.

Manual

Version 1.2.0

Pos: 40 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e S eri en/G erä teb esc hreib ung /B edie nel eme nte - Ü b ersc hrif t 2 @ 4 \mod_1239191655456_21.docx @ 30439 @ 2 @ 1

3.4 Operating Elements

Pos: 41 /S eri e 7 50 ( WA GO-I/O- SYST EM) /G erät eb eschr ei bung /Be die nel emen te/ Bedi en elem ent e Bus kl em me 7 50- xxxx nic ht vor hande n @ 4\mod_1236322031125_21.docx @ 28063 @ @ 1

The I/O module 750-455 has no operating elements.

Pos: 42 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

Page is loading ...