Paradyne Hotwire 6211 Quick Installation Instructions

Category
Interface hubs
Type
Quick Installation Instructions

This manual is also suitable for

6210 Bridge and 6211 Bridge/Router
Quick Installation Instructions
Document Number 6210-A2-GZ13-00
January 2005
If you connected the USB port of the modem to your PC, the Found New Hardware Wizard appears on your
computer screen. Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard.
See the user’s guide on the CD for important safety instructions and more information.
.
*6210-A2-GZ13-00*
04-17517
LINE LAN POWERPHONE USB
OR
1
2
3
4
DEFAULT
RESET
Connect the LINE
port of the modem
to your DSL line
using the
supplied
phone
cord.
Connect either:
The LAN port of the modem to a
10/100BaseT Ethernet network
interface card on your PC, or to
hub or switch in your network. An
Ethernet cable is supplied with your
modem.
or
The USB port of the modem to a
free USB port on your PC.
Connect the POWER
receptacle to the
power supply and plug
the power supply into
a wall outlet.
Connect the TELEPHONE
port of the modem to
your telephone
using the cord
that came with
your telephone.
Copyright © 2005 Paradyne Corporation.
  • Page 1 1

Paradyne Hotwire 6211 Quick Installation Instructions

Category
Interface hubs
Type
Quick Installation Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI