Hyundai HM-5064 User manual

Brand: Hyundai

Model: HM-5064

Category: Car media receivers

Type: User manual

Hyundai HM-5064 gives you the best musical experience you could ask for on the road. It comes with a variety of features that make listening to music more enjoyable. With its security code input feature, you can rest assured that your music will be safe from theft.

It also has a built-in clock, so you can always keep track of time while you're driving. And with its anti-shock mechanism, you can be sure that your music will not be interrupted by bumps in the road.

The HM-5064 also has a variety of sound adjustment features, so you can customize your listening experience to your liking. With its bass, treble, balance, and fader controls, you can find the perfect sound for your music.

flNgTRUGffi@N MJAINAAL

HM-5W

rf=\-

HYUnOFI HM-@

@ ./::-\

FL-

(@)

(_.@'@----)

tr;dl^I:f---

// \\ 14 | JsrnrarroREoNRcGLocLouoco,nl ll

ll2ull3nn

(

) t@@l | 1ffiffiffiffiffiffi,&r?l lF=H

L=-JffiUltilI5

Hmtrgxd,}titrH

::.1:.,,:.:

::.:.i;:|.:

Before operating

the unit,

please

read this manual

thoroughly

and

retain it for

future

reference.

llllllirii:l

lllr,l:::

sFsnffig&o!€!@q

I I5T

lt,

l-'E

srlrcr

BUTToN

(

sEL

)

)AUD|O

FUNCTION

SELECTION

This button

is to select

the function.

When this button

pressed

each

time.

LCD displays

each

mode

follows

VOLUME

BASS

TREBLE

BALANCE

FADER

When

this button

pressed.

LCD Display

shows selected

function

for

seconds and

then

returns

back

to the

RADIO or CD

mode. On selected

function, level can

be controlled

turning

this button.

The display

will automatically

return

to normal indication

5 seconds

after

the last adjustment

made or

when another

function

is activated.

tr )

oN-oFF

PowER

BUTToN

(oFF)

Press

this button

to turn the

unit on or

off.

When the

power

is on.

the

mode

(last

memory

)will

appear.

tzl

rNrrAL voLUME

LEVEL sET

Press

the POWER button

longer

than

2 seconds

to memorize

initial

volume

level. The current

volume

level

stored

the initial

volume

level.

VOLUME UP /

DOWN CONTROL

increase the

volume level,

turn right.

The volume

will increase

and

the

level will be shown

under

the

VOL

indication on

the display

panel.

decrease

the volume

level, turn

left. After 5 seconds,

volume

indication

display

will return to

the

mode.

This control

is also

used

conjunction

with the Select

(SEL)

button

to adjust

the Bass,

Treble,

Balance

and Fader

levels.

l.--.-777;'.'..:::::

ltl:ttt,,W@&.

::2:u,;i::t::;t::,:Z

ansscoNrRoL

adjust the Bass level, first

select the Bass mode by

pressing

the

Select button

until

the

BAS"

indication appears

the

display

panel.

Within

5 seconds of

choosing the bass mode turn righVleft to adjust the

bass response

as desired. The

bass

level will

be shown on the display

panel

from

a minimum

"BAS

-10"

to a maximum of

"BAS

10". The

display will automatically return

to the normal indication

seconds

after

the last

adjustment

when

another function is activated.

rnreLe

coNTRoL

adjust the treble level, first

select the Treble mode

pressing

the

Select button

until the

TRE" indication

appears on the

display

panel.

Within

5 seconds of choosing the

treble mode, turn righVleft

to adjust the treble response as desired.

The treble level will

be shown on the display

panel

from a minimum of

"TRE

10" to

maximum

"TRE

10"

per

BASS control. The

display will automatically return to

the normal indication 5

seconds after the last

adjustment or when another function

is activated.

anmruce coNTRoL

To adjust the left-right

speaker balance, first

select the balance mode

pressing

the Select button

until

the

"BAL"

indication

appears on the

display

panel.

Within

5 seconds of choosing the

balance mode, to

adjust stereo balance to

the left channel

speakers or

turn right

to adjust it to the

channel soeakers.

The

balance

position

will be

shown by the bars on the

display

panel

from

"BAL

10L"(full left) to

"BAL

10R"(full

right). When the volume

level

between the

left

and right speakers is equal,

"BAL

L=R" will

be shown on the display

panel.

@trNtrRAL

The

display will

automatically return

to the normal indication

5 seconds

after the last adjustment

or when another function

is activated.

rnorn

coNTRoL

To adjust

the

front-rear

speaker balance, first

select the Fader mode

pressing

the

Select button

until the

FAD" indication

appears on the

display

panel.

Within

5 seconds

of choosing the Fader mode

turn

right

/ left

to adjust the front-rear

speaker

level

as desired.

The fader

position

will

be shown by the

bars on the display

panel

from

"FAD

10F"(full

front)

"FAD

10R"(full

rear). When the volume level

between the front

and rear

speakers

equal,

FAD F=R" will

be shown

the

display

panel.

The

display will

automatically return to the normal

indication

5 seconds

after

the last

adiustment

when

another

function

activated.

uoor BUTToN

Press MODE

button to

selected

changer mode.

When

chanqer is

not

connected mode

control will not resoond.

HYUnEFI H

ruE€Ei

(sJ

/^lE

!tts

Itr9l | | I

t------- | |

lY)

nuoro

MUTE BUTToN

(MUTE)

Press

this

button momentarily

to mute the volume

from the system

and

"MUTE"

mark will

blink on the LCD

panel.

Press the

button again to return

to the RADIO

or CD setting in

use before the Mute

mode was activated.

Mute mode will

also be

cancelled by

pressing

any other function button

the

front

panel.

r-ouorurss

coNTRoL

(LouD)

When

listening

to music at low

volume levels, this feature

will boost the

bass and treble response

compensate for the

characteristic of human

hearing.

Press the

button to activate this feature

as indicated

"LOUD"

mark

on the display

panel.

Pressing the

button again will

de-activate the function

and

"LOUD"

mark

will

disappear from the

display

panel.

uLL-

orsnmv

BUTToN

(Dtsp)

During Radio

tape or

CD operation,

press

DISP

button

to call the

time

R /---ffi----f

display on the incorporated

quartz

clock for

5 seconds. After 5 seconds

displaying the

clock, the

unit

will

return to

RADIO or CD display.

\9'

rmG;I-Gl

lll-vul

| | l/----r /------r /-----rl

5Jt_u

ri9

|j9

:*-

$#**

::::::)::::i,,

iiililr11,,,

nrurr-rnEFT

DETERRENT

LED

This LED lamp

blinks

every 1 second when the

unit is

turned

off.

SECURITY CODE INPUT

To activate

security code.

1. Turn

on the unit

protection.

After

power

supply is

interrupted.

CDE" will appear on the LCD.

2. Preset

button 1-4

enter the securitv number

supplied

on security

card.

After

confirming the

security number,

press preset

(@).

4. With the

correct code. the unit will

ooerate.

5. lf the incorrect

code is

entered,"2

CDE"will appear

LCD.

lf the incorrect

code is

entered again,

CDE" will

appear on LCD.

7.|f, after the third

attempt, the

code is incorrect,

the set will turn

off. Wait t hour

before

entering

security code.

rHr

coRRECT ANTI-THEFT

coDE NUMBER

you

lose

your

ANTI-THEFT

security

code number,

you

must

contact a Hyundai Dealer

and

present

evidence

you

are the vehicle

owner in order to

obtain the correct ANTI-THEFT

code

number.

ltoulo

cRYSTAL DTSPLAY

PANEL

The Liquid

Crystal Display

(LCD)

Panel

shows

the frequency, funetion

and operation

of Radio, CD and

CD Changer mode.

NOTE

: lt is a

characteristic of LCD

panel

that, if

subjected to

cold temperatures for

an extended

period

of time, The

display will take longer

to illuminate.

HY[JnOFll HM-so6a

r)l

( (

fGil r----ffi-ffi----l

ffiffiXffiffiffi;N&";

MoDE

LY-/

]ffuntrHl

Addendum

your

Gar CD

Radio

instruction manual.

Dear

Hyundai Ownel

Please

replace

page

six

(6).

Subiect: Security

Code

Input.

with this addendum.

The instructions and

procedures

within this adden-

dum are

correct and

replace

those instructions

found on

page

six

(6)

your

Radio

lnstruction

Manual.

Please

refer to the other side of

this sheet

for the

cornect

instructions.

Anti-theft

security

code input.

activate the security

@de,

please

forlow

these steps.

'1.

Turn on

your

stereo.

lf the stereo screen

indicates

1 CDE',

this is

a message

that

you

need

enter

your

antj-theft

security

code.

Your security

code

number can be

found

printed

the

plastic

card

supplied

with

your

new

Hyundai

vehicle.

4. Every Hyundai stereo

has

il'S

own

individual antFtheft

security

code. Entering

an incorrect

code or using

incorrect

procedures

will not

activale

your

slereo to

an operational

status.

5. Your anti-lheft

code

is made up of

four

computetrgenerated numbers.

An example code

may 6e 3212

7. To enter

code 3212

into

your

stereo, always follow these steps,

Press tuner button

number one

(1),

three times.

(3)

b. Press

tuner button number

two

(2),

two times.

(2)

Presstunerbuttonnumberthree(3),onetime.

(1)

d. Presstunerbutton

numberfour(4),twotimes.

(2)

e, Check

that the code

shown on

your

stereo screen is correct.

Press tuner button

number five

(5)

once to aclivate the code.

Another example code

number is 7963,

To enter code 7963

into

your

stereo, always

these steps,

Press tuner button

number

one

(1),

seven

times.

Presstunerbuttonnumbertwo(2),ninetimes.

(9)

Presstunerbuttonnumberthree(3),sixtimes.

(6)

Press tuner button

numberfour

(4),

threetimes.

(3)

e. Check

lhat

the code shown on

your

stereo screen is correct.

f. Press tuner

butlon number

five

(5)

once

activate

the

code.

10. lmportant: lf

you

have entered

the incorrect anti-theft code or used an incorrect

procedure

your

firsi attempt,

your

stereo screen

will

exhibit the

following message

CDE".

This means

you

need

enter the code a

second

time taking care to follow these

instructions

and enter

the

correct

code.

1 . lf the stereo screen

shows lhe message

CDE",

this means

you

failed to follow lhe correct

instructions

or that

you

entered

the incorrect code.

12. lfyoufailtosucceedtoenterthecorrectcodeatthethirdattempt,yourstereowillturnoff.You

will need

to wait at least one

hour belore

attempting

to re-enter the correct anti-theft security

code number

using the above

plocedures

correctly.

Your Hyundai

stereo

has the Anti-Theft code entered into it

prior

to vou collecting

vour

new

Hyundai car.

The only time

vour stereo

will identifu the message

CDE"

in the screen

is if

your

stereo and or car have lost batterv oower.

vour

car battery

is in oood order.

your

stereo

will

your

anti-theft

code

number

using the above

procedure.

you

experience

a failure

operate

your

stereo after carrying out the above

procedure, please

visit

Hyundai Dealer

for

additional

assistance.

Please do noi leave

your

plastic

card containing

your

Anti-Theft

Security Code

Number

your

can

Keep

your

card

featuring

your

code number in a safe secure

place.

you

lose

your

anti-theft security

code number,

you

must

contact

a Hyundai Dealer and

present

evidence

you

arc the

yehicle

owner in order to obtain the correct anti-theft code

number.

addition,

the visibility of the

numbers on the LCD

may slightly decrease.

The LCD

read-out

will return to normal when

the temperatures increase

to a normal

range.

trl

coNFrRMATroN

BEEe

roNE

SELECToR

Pressing this button for

longer than 2 seconds

will deactivate

the

Confirmation

Beep Tone feature

which

produces

the

short

Beep"

tone as

a confirmation whenever a

function is activated

on the unit.

tzl

srEREo /

MoNo

Turn the button

left or right to select STEREO/MONO.

lf stereo station

received in stereo

mode,

"ST"

segment shows

on display

panel.

Select

"MONO"mode

for monaural

reception to reduce background

noise.

nvtrv BAND SELECToR

(BAND)

Each time

this button is

pressed,

the radio band

changed.

Each time

this

button

pressed,

LCD displays each band

follows :

FM1"+FM2-FM3-AM

unruunl uP/DowN

TUNTNG

(

)

To manually select

a radio station,

momentarily

press

the UP

Tuning

(

)

button

for longer

than

lsecond

advance

the unit one digit

higher orthe DOWN tuning

(sZ

)

button

to tune downward.

Continue

press

either

button to tune

the radio rapidly in the selected

direction.

The manual

mode is

released

after

seconds.

Pressing UP or

DOWN button

for less than 1 second and

then releasing will activate

the Automatic

Seek

Tuning function in the selected direction.

The radio

will

seek

the next available

station and stop

that frequency. The Seek

function can be stopped by

pressing

the button

again or activating

any

ffi

other tuning

function.

enrsrr

scAN

(ps)/

BEST

srATtoN

MEMoRy

(BSM)

BUTToN

trl

PRESET

scAN

(ps)

Press

this

button momentarily

scan the 6 station

preset

into the memories

on the

AM bands

or the 18

stations on the FM

bands. The

unit will stoo

each

pre-set

station

(the pre-set

number

on the display

panel

will flash

during

preset

Scan operation)

and rernain

on the selected frequency.

Press

the

button

again momentarily

preset

Scan operation

and remain

on the

selected

frequency.

tzl

BEST

srATtoN

MEMoRy

(BSM)

Pressing

the

button for

longer than

2 seconds will

activate the BSM Tuning

feature

which

will automatically

scan and enter

each station into memory.

After

entering

the stations

into memories,

the unit will

automatically

stop at

each

station for

5 seconds so

each station

can be

heard.

you

have

already

set the

pre-set

memories

your

favorite

stations,

activating the

BSM Tuning

feature will

erase those

stations and enter the new

ones. This feature

is most

useful when

traveling in

new

area where

you

are

not familiar

with the local

stations,

locnl-ox

coNTRoL

(Loc)

The

unit features low

seek

sensitivity which

you

can select manual

tune.

Pressing

this

button

(LOC)

momentarily

will

select between

the local seek

sensitivity

(only

strong

stations are received

;

Local reception

)

and the DX

seek

sensitivity

(strong

and weak

stations

are

received

;

Long

distance

reception).

you

choose local

seek sensitivity the

display shows

"LOC"

RT AF TP PTV EON

AEC LOC LOUO CO.'N

$&EffiEff,:ffiff";

tl::

:::::.!ll::..:..::::::..

'.,':::::.:i;,1

@-@

srATtoN

pRE-sET

BUTToN

Pressing

these

buttons less

than 2

seconds recalls Pre-Set

radio frequency.

set any

of the

pre-set

memories

each

band, use the following

procedure;

a. Turn

the radio

on and

select the

desired

band.

Select the first

station to

pre-set

using the Manual

UP/DOWN or

Automatic

Seek

Tuning

Control

Press

the

pre-set

button

to be

set and continue

to hold it in. The

BEEp

sound will

be momentarily

heard

and the

pre-set

number

will

appear on the

display

panel

indicating

that

the station

is now

set

into

that memory

position

and

can be recalled

any time, by

pressing

that

pre-set

button.

rnncr SELECT

& cuE /

REVTEW BUTToN

(TRAcK

)

trlrRAcK

sELEcr

FUNcloN

This

button

is used

quickly

select

the beginning of a

particular

track. Tap

the

Forward Track Select

(

)

button or

Backward

Track Select

(

)

button to locate the desired

track as

shown bv

the track number

on the

display

panel.

tzl

cuE/REVTEW

FUNcIoNS

High-speed

audible search

to any section

of the disc can

be made

by the

Cue

and Review

functions.

Press

and

hold

the

Cue

(

)

to advance

rapidly

in the forward direction

or the Review

side of the button

(

)

advance

rapidly

in the backward direction.

pnusr

sELEcroR

During disc

ptay, press

this button

to temporarily

stop

play

of the disc

(the

'PAUSE'

indication

will

appear

on the display

panel.)

Press button

again to

resume

play

of the disc

from the

point

which

it was stopped:

Pause mode

will also be cancelled by

activating any

other disc

function.

rnncr

scAN

(scN)

During

disc

play,

press

this

button to

play

the first

10 seconds

of each track

on the

disc

(

'SCN'

mark

will appear

on the display

panel.)

When

a desired

track is reached,

press

the

Scan button

again to cancel the

function

and

play

of the

selected

track will

continue. Track

Scan mode

will also

cancelled

activating the

Repeat

play

or Track

Select

functions.

nrernr

PLAY

sELEcroR

(Rpr)

During

disc

play,

press

this button

to repeat

play

of the selected

track

("RPT"

will appear

on the

display

panel.)

Play of the

track will continue

repeat

until the button

pressed

again and the

"RPT"

disappears

from the

display

panel.

Repeat

play

mode will

also be cancelled

by activating

Shuffle

Play

or Scan

functions.

sHurrlr PLAY

sEcroR

(sHF)

During

disc

play, press

this

button to

play

the tracks

on the disc in

a random

shuffled

order

(

"SHF"

will

appear on the

display

panel

The

track select

lunction

will

also

select track in

the random

order instead of the normal

progression.

The

shuffle Play

mode

can be cancelled

by activating Repeat

Play

or Scan

functions.

5ffi

dra

\\ t-l

il il

M@E

t t-l

lJ l-l

J"\Y)

orsc slor

With the

label surface

facing up,

gently

inserl the disc

into

the slot

until

the soft-

mechanism

engages

and disc

play

begins.

The

Disc

play

track

number

will appear

on the

LCD.

NOTE

: This unit

is designed

for

play

standard

(12cm)

compact

Disc

ONLY.

Do not attempt

to use

(8cm)

CD-single

discs

in this unit,

either

with or

without an

adapter,

as damage

the

player

and/or

disc can

occur. Such

damage

will

not

covered

the Warranty

this

product.

otsc

EJECT

(

;

pressing

this button,

the disc

will be

ejected and

the unit

will change

to either

radio or CD

changer

mode depending

which

was last

use

before CD

player

mode

was selected.

lf the disc

is not

removed

from the disc slot

within

15 seconds of

being ejected,

it will automatically

reloaded

into the

unit

prevent

it from being accidentally

damaged.

Play of

the disc can be

resumed

by using

the Mode selector

to choose

player

function.

&ffifflffl&&;N&E

-=----

1tr

ltzsNlls

lr-----\ t----\

u!g!r

PROGRAMMABLE

PLAY

FEATURE

The

BAND

selector

button

will

used

as the

programmable

play

function

mode

on/off

button

pressing

less

than

2 seconds.

press

the

BAND

selector

button

for longer

than 2

seconds,

the

programmable

Play function

will

be ready

enter memory

of the

desired

track. within

seconds,

you

choose

the

desired

track

with the

track

Up/Down

butron,

the

desired

track

number

will

memorized

pressing

the M5

bunon

and

other

desired

tracks

will

be memorized

with

same

procedure

and

vou

can

erase the

track

out

of memories

pressing

the M4

button.

pressing

BAND

selector

button

less

than

seconds,

the

memorized

tracks

will

activated

in order.

case

disc is ejected,

all

the

memories

will

be erased.

Kf-r=

/ \tiffit I t-;

\ //F-i I tl

\/o

\=)

@HIAN@EFt

trR@es

'"]

This set

incorporates

controls

to operate

HYUNDAI

6-disc

changer.

This

HYUNDAI

changer

model

HAC-100B

is available

from

any

HYUNDAI

dealer.

Please

contact

your

HYUNDAI

dealer

arrange

for supply

and

install of

your

HAC-1008.

Adiustment

the audio

functions

(volume, tone,

balanie,

and

fader)

for the CD

changer

operate

in the same

manner

they do

for radio

play.

The

following

controls

wiil operate

the CD changer

when it

is installed

and

connected

this

radio.

Refer

the Owner's

Manual

included

with

the CD

changer

for instructions

the

installation

and

correct

and

use

of the

magazine.

@-lry

rnncK

SELEcT

(TRAcK

)

ihis button

is used

quickly

select

the beginning

a track.

Tap the

Forward

Track Select

)

button

Backward

Track Select

(

button

locate

the

desired

track

as shown

the

track

number

the display

panel'

I-

I lf

ttfi

ltE

l-'*

@-12;cuenEVtEW

FUNCTIoNS

(TRAcK

)

High-speeo

audible

any section

of the

disc

can

made

by the

cue

an-d

Review

functions.

Press and

hold the

cue

button

(

)

to advance

rapidly

in the

forward

direction

the

Review

button

(

)

advance

rapidly

in the

reverse

direction.

G1D

@uil4lN@iEdt r4@dr]ffIO'1tJ

enusr

sELEcroR

(

)

During

disc

play,

press

this

button

to temporarily

stop

play

of the disc

(

the

PAUSE"

will

appear

on the

display

panel).

press

button

again to resume

play

of the

disc from

the

point

at which

it was

stopped.

pause

mode

will

also

be cancelled

activating

any other

disc function.

rnncruusc

scAN

(

scN

)

When

the

scan

button

pressed,

the

SCN

will

appear

on the

display

panel

and the

tirst

seconds

each

track

on the

disc will

played

order.

when

a desired

track

is reached, press

the

scan

button

again

and

play

of that

track

will

continue

("scN"

will

disappear

from

the

display

panel

The Track

scan mode

will

cancelled

by activating

any oiher

disc

function (

Select,

Cue, Review,

Shuffle,

Repeat

when

the

scan

button

pressed

and held

longer

than

seconds

the

"DscN"

will

appear

the display

panel

and the first

track

each disc

will

played.when

a desired

disc is

reached,

press

the

Scan

button

agarn

and

play

of that

disc

will

continue

DSCN"

will

disappear

from

the

display

panel

).The

DSCN

mode

will

cancelled

by activating

any other

disc

function (

Select,

Review,

Shuffle,

or Repeat

rnncr

/ Dtsc

REeEAT

(

Rpr

)

When

the

Repeat

button is

pressed,

the

RpT"

will

appear

the display

panel

and

play

of the

selected

track

will

continually

repeated

until the

Track

Repeat

mode is

cancelled

pressing

the Repeat

button

again

or by

activating

the

shuffle

scan

functions ("

Rpr"

will

disappear

from

@@@

the display

panel

When the Repeat

button

pressed

and

held longer

then 2 seconds, the

DRPT" will

appear on the display

panel

and

play

the selected disc will

be continually

repeated

until the

Disc Repeat mode is

cancelled by

pressing

the Repeat

button again or by activating

the

Scan

or shuffle

functions

(

DRPT

will disappear from the display

panel.)

@ @

orsc

sELEcr

(D-,

o+;

These buttons

are used to select the desired disc for

play.

advance to a

higher number

disc,

press

the

D+

button

To return to a lower number

disc,

press

the

D-

button

The number

of the disc

play

will

shoWn

the

display

panel.

rnncruorsc

SHUFFLE

(sHF)

When

the Shuffle button is

pressed,

"SHF"

will

appear on

the

display

panel

and the tracks

on the disc

will

played

in a

random,

shuffled

order.The

track select button

@-(1)

will

also select

tracks in the

shuffled

order

instead

of the normal seouence. The Track

Shuffle

mode

can be

cancelled by

pressing

the

Shuffle button again or by activating

the Repeat

or Scan

function

SHF

will

disappear

from the

display

panel

When

the Shuffle button is

pressed

and

held longer then 2

seconds,

the

DSHF

will appear

on the display

panel

and the discs in the magazine

will

played

a random,

shuffled order and

its

tracks

will

played

shuffled order.

The

Disc

Shuffle

mode

can be cancelled by

pressing

the

Shuffle button again or activation the Repeat

or Scan

functions

(

".DSHF "

will disappear from the

display

panel

Page is loading ...

Hyundai HM-5064 User manual

Brand: Hyundai

Model: HM-5064

Category: Car media receivers

Type: User manual

Download PDF

report

Hyundai HM-5064 User manual

Hyundai HM-5064 User manual

Related papers

Other documents