2. Poly
  3. SoundStructure
SoundStructure

Poly SoundStructure User guide

  • Hello! I am an AI chatbot trained to assist you with the Poly SoundStructure User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SoundStructure VoIP Interface
Quick Upgrade Guide
Copyright 2011 Polycom Inc. All rights reserved. Version 1.0 | 1725-33217-001 / A
Follow these steps to upgrade your existing SoundStructure System from a TEL1 or TEL2 based design to a
SoundStructure VoIP Interface. Refer to the latest SoundStructure Design Guide for additional design information.
2
1
Run SoundStructure Studio, connect to your SoundStructure system, and
‘Get’ the configuration from the devices
Install SoundStructure Studio v1.7.0 or later
4
5
3
Update your SoundStructure system to SoundStructure
firmware v1.5.0 or later.
If system is already running firmware v1.5.0, select
disconnect to take the system offline and go to Step 6.
If you have a functional SoundStructure system, save your online project to your computer
( Only appears if changes have
been made to the project )
Oine System
Online System
5
6
Run the Upgrade Plug-in Card Tool to upgrade your SoundStructure Studio project with a
SoundStructure VoIP Interface plug-in card. If you already have a SoundStructure VoIP
Interface-based configuration file,
go to Step 7.
Update your SoundStructure system to SoundStructure firmware v1.5.0 or later (continued)
PHONE LINE
PIN 2: TXD
PIN 3: RXD
PIN 5: GROUND
PIN 7: CTS
PIN 8: RTS
LAN
C-LINK2
OBAM IR
RS-232
REMOTE CONTROL 2
REMOTE CONTROL 1
IN OUT
12V
0004F2009EFF
PIN 2: TXD
PIN 3: RXD
PIN 5: GROUND
PIN 7: CTS
PIN 8: RTS
LAN
C-LINK2
OBAM IR
RS-232
REMOTE CONTROL 2
REMOTE CONTROL 1
IN OUT
12V
PHONE LINE
Upgraded project
6
7
8
Disconnect power Replace the plug-in card(s)
Run the Upgrade Plug-in Card Tool (continued)
Oine
System
Online
System
LAN
C-LINK2
OBAM IR
IN OUT
12V
0004F2BF001D
9 10
11
Send the updated configuration file created in step 6 to the SoundStructure system
Reconnect power and wait for the system
to power up
Connect the VoIP LAN to the
network
SoundStructure VoIP Interface
Quick VoIP Setup
Default Admin Password: 456
Follow these steps to congure your SoundStructure VoIP Interface. Refer to the latest SoundStructure Design
Guide for additional SoundStructure design information and examples.
13
12
Launch Web Configuration Utility
Confirm VoIP network settings or manually configure to match your environment
Select time server and
time zone
Enter SIP server address
Enter SIP proxy server
Enter SIP Line settings
14 Use Simple Setup to configure the SIP settings
Line
Registered?
Line Not Registered?
Unregistered Line Registered Line
15
14
Confirm Line Registration
Go to step
Finished!
/