Astonica 04-02-01020 Assembly Instruction

Astonica
Brand
Astonica
Model
04-02-01020
Type
Assembly Instruction

This manual is also suitable for

OUTDOOR LIVING
TABLE FOUNTAIN
ASSEMBLY INSTRUCTIONS
Read the Instructions and Precautions before use of this product
MODEL NO: 04-02-01020, 04-02-01022,
04-02-01023,04-02-01024
Please keep this instruction manual for future reference
Limited Warranty
World Factory Products for Home Use
World Factory (Seller) warrants to the original Buyer only, that this Product will be free from defects in
material and workmanship for a period of one (1) year from date of purchase. SELLER’S SOLE
OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN
MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN
MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR
ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT
OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. To make a claim under this Limited
Warranty, you must return the complete product, transportation prepaid, to any World Factory authorized
service center. Call 1-888-422-7800 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR
FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,
ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such provision
shall not affect any other provision herein, this Limited Warranty shall be construed as if such invalid and/or
unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior
agreements, arrangements, or understandings between the parties relating to product warranty.
Distributed By:
World Factory, Inc.
Southlake, TX
1-888-422-7800
© 2001 World Factory, Inc.
1. Connect the pump (E) to the lid (D) and fountain assembly (A) as pictured. Place the
pump (E) into plastic liner (C) and fill with 6" of water and close with lid (D).
2. Place the plastic liner with fountain assembly into the copper base (B), and cover
lid with decorative rocks (F). Gently adjust leaves to ensure proper flow of water.
3. Do not plug in pump before filling container with water. Doing so may damage pump.
4. Use distilled water, if possible to fill container.
5. To adjust speed of water flow: unplug pump, remove lid, move switch on pump (E)
toward "+" positive to increase water flow, or "-" to decrease water flow.
6. Check water level periodically, add water if necessary.
7. If water is not flowing, check pump (E) or fountain assembly (A) for clogs. Pump may
build up calcium after a long period of time and stop running when tap water is used.
Any calcium remover can be used to clean pump.
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 1Fountain Assembly
B 1Copper Base
C 1Plastic Liner
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-422-7800.
Carefully remove the contents from the package. If any parts are missing do
not attempt to use the product until they have been obtained and correctly
installed.
Caution: Do not over tighten fasteners.
ASSEMBLY INSTRUCTIONS
Figure 1
D 1Lid
E 1Pump
F 1Bag of Decorative Rocks
A
B
C
D
E
F
• Connect pump to lid (part "B" of part "A" of pump)
as pictured.
• Do not plug in pump before filling container with water.
Doing so may damage pump.
• Use distilled water if possible to fill container.
• Gently adjust leaves to ensure proper flow of water.
• To adjust speed of water flow:
unplug pump
remove lid
Move switch (part "C" of pump) toward "+" positive to
increase water flow, or "-" negative to decrease water flow.
• Check water level periodically, and add water if necessary.
• If water is not flowing, check pump or tall stem for clogs.
• Pump may build calcium of a long period of time and stop
running running when tap water is used. Any calcium
remover can be used to clean pump.
Instructions
PUMP
CORD
COPPER STEM
A
B
C
E
D
F
D
A
E
  • Page 1 1
  • Page 2 2

Astonica 04-02-01020 Assembly Instruction

Astonica
Brand
Astonica
Model
04-02-01020
Type
Assembly Instruction
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents