Placement Weight Height Width Depth
On top of any MCS Top Plate or any at stable surface 11.25 lbs 15.0” (includes 5” pole) 5.5” 11.6”
D
W
H
Item No. 7160-0006
Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
• Convenient ip-up armrest and printer mount all in one
• For use with the following Brother printers:
• PocketJet 200
• PocketJet 3
• PocketJet 6
• Mount holds printer and paper roll in separate lock down trays
• Paper roll is enclosed to protect from dirt and dust
• The cover latches shut and can be used with a paddle lock for extra security
• Indicator lights and on/o button are easy to see and accessible when the cover is closed
• Paper de ector prevents paper from curling up and jamming
• Cable strain relief protects connector interface on the printer engine from damage
• Printer can be easily removed from the mount for use outside of the vehicle
• Paper feeds out the side towards the driver
• Paper and printer not included
• PocketJet II
• PocketJet 3 Plus
• PocketJet 6 Plus (NiMH battery only)
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: [email protected] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
BROTHER ARMREST PRINTER MOUNT
BROTHER ARMREST PRINTER MOUNT
/
