Laserliner Flexi Messlatte Plus Owner's manual

Type
Owner's manual

This manual is also suitable for

1 2
Laser
A
B
C
E
D
D
C Plus/minus mm scale
D Height difference
E Millimetre scale for
measuring heights
Flexi levelling staff
Principles of taking a
measurement using the
exi levelling staff:
In the rst step the laser measuring
device is aligned and the laser
receiver (A) is mounted onto the
levelling staff and set to “0”. Next,
the knurled screw (B) is used to set
the exi levelling staff exactly to
laser beam height “0” (Picture 1).
The laser receiver is then re-adjusted
and moved to the height of the
laser beam (Picture 2).
If the measurement point lies below
the starting level, the levelling staff
will indicate a negative value; if
it lies above, the value indicated
will be positive. So, the plus/minus
scale indicates the correct height
reference value straightaway,
without the user having to carry
out any calculations.
03
EN
8.026.96.23.01 / Rev18W05
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
Flexi-Messlatte
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Laserliner Flexi Messlatte Plus Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI