Asgård Parcel Delivery Box Assembly Instructions

Brand: Asgård

Model: Parcel Delivery Box

Type: Assembly Instructions

K ( 1:3 )

ASGARD

MEDIUM

PARCEL BOX

ITEM

PART

DESCRIPTION

QTY

ASGARD

ASGPAR2###

INSTALLATION INSTRUCTIONS

BASE INSTRUCTIONS

A FIRM, LEVEL ,FLAT SURFACE IS

REQUIRED AS A BASE FOR THIS UNIT

SUCH AS CONCRETE OR FLAGS.

- MINIMUM BASE MEASUREMENT

(550W*400D)

TOOLS REQUIRED

- POSI-DRIV SCREWDRIVER

(POWER DRIVER RECOMMENDED)

- 6mm DIA MASONRY DRILL

- 13mm SOCKET SPANNER

(FOR ANCHOR FIXINGS)

ANCHORING

OF UNIT

THIS UNIT HAS BEEN DESIGNED

TO RAISE THE FLOOR OFF THE

CONCRETE SLAB BY PLACING

PACKING PIECES NEARTHE FIXING

POINTS IN THE BASE.3 PER CORNER

- SLIDE THE PACKING PIECES UNDER THE

CORNERS OF THE UNITS WHERE SHOWN

- MARK THROUGH THE FOUR HOLES

IN THE FLOOR OF THE UNIT.

DRILL THE BASE USING 6mm DIA

MASONRY DRILL TO A DEPTH OF 70mm.

- SCREW IN THE ANCHOR FIXINGS.

(THESE HAVE A SELF CUTTING THREAD)

PLEASE SEE OUR WEBSITE FOR DETAILS

OF MAINTENANCE OF THIS PRODUCT

WWW.ASGARDSSS.CO.UK

ZSCREW32

M7.5*60 ANCHOR BOLT

ZCOMPPLAS 24

5mm PACKERS

045759

HDU BOX ASSY

THIS UNIT HAS BEEN DESIGNED

TO BE FLOOR STANDING ONLY

- PLEASE NOTE IF ANCHORING UNIT

NEAR A WALL PLEASE ALLOW

ENOUGH SPACE FOR LID TO OPEN

25MM BEYOND BOX BACK.

500,00

OPENING SIZE: 500X348MM

ZST197 ASGARD PACEL

DELIVERY BOX LABEL

Asgård Parcel Delivery Box Assembly Instructions

Asgård Parcel Delivery Box Assembly Instructions

Asgård Parcel Delivery Box Assembly Instructions

Related papers

Other documents