Thank you for purchasing an Apeman product.
■Please read this instruction manual carefully and use it
correctly.
Instruction Manual
DASH CAMERA
model: C560
version：3.0
item product no:
Apeman GPS module for DVR camera
GR20
Package Contents
Optional Accessories
※ Please contact our Amazon store to purchase optional items.
C560 camera
cable cover
5v power chord (3.5m)
3M adhesive mount
Instructions
USB cable
1
Microphone (records audo during video recording).
micro SD (TF) card slot.
lens angle adjustment knob (max. approx. 60')
USB power and data socket
optional GPS module socket
external monitor connection socket
camera mode indicator light
power indicator light.
recording indicator light
1.5'' LCD display.
SEE NEXT PAGE
SEE NEXT PAGE
confirm operation button
operations related to the main menu button
SEE NEXT PAGE
mounting stay attachment
camera reset hole
す。
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
·
·
·
·
·
·
·
·
cable cover mounting (attach to main camera body)
Functions & features
MIC
TF
Twist adjust knob
mini USB
GPS socket
A/V connector
Mode light
Power light
Record light
Screen
MIC / DOWN
RECORD / UP
OK
MENU
Power button
Stay mounting part
Reset hole
Cable cover mount
2
・This unit cannot record without a micro SD card installed.
・Initialize the micro SD card.
・Perform operation with vehicle engine off.
button OFF state standby state
power button
long press
－
power off after recording
short press
after power-on
start recording
screen OFF
(screen ON with any button)
MENU
button
short press
－
return to main menu
button recording
still image
in
mode
during each
setting
preview
in mode
OK
button
long press
－
－
－
go to recording mode
short press
lock
deleted
& written
protection
still image
shoot
decide
start of playback
temporary stop
stop
button
Recording
in
standby
state
during each
setting
preview
in mode
regenerating
REC/UP
button
short
press
long
record
stop
start recording
forward
forward
rewind
press
MIC/
DOWN
button
recording
on
off
mode
switching
next
next fast
forward
Button operation
Installation notes
short
press
long
3
1. Install the micro SD card
• use a micro SD card with a speed of class 10 or higher and a capacity of
4GB-32GB to ensure device stability.
• turn the device off before inserting or removing the micro SD card.
2．Secure the connecting cable so that it does not hinder vehicle
operation.
3．Attach to windscreen.
• The mounting position should be within 1/5 of the top of the
windscreen to prevent issues with rear view mirror positioning.
（left and right sides of rear view mirror recommended）。
• When attaching with double-sided tape ensure surface is clean and dry.
4．Insert the plug at the end of power cable to vehicle's AUX / lighter socket.
• unit starts recording automatically when power is connected.
• if AUX / lighter socket contacts are dirty this may prevent operation.
• be sure to use the included vehicle power connecting cable.
5．Turn the lens knob to adjust the vertical angle.
• when setting viewing angle set camera to record less that 50% sky.
Recording too much bright sky can cause image to darken.
mounting method
4
1. Automatic recording
Shooting starts when the vehicle's engine is turned on (power is turned on). At the
same time, the microphone lamp and the power lamp light up, and the REC lamp
starts blinking. Shooting ends when the engine is turned off (power is turned off).
The unit automatically saves the video and then turns off. When the memory of the
TF card becomes saturated, delete the oldest video and record.
• audio is recorded during shooting (initial setting)
• recording time for loop recording is adjustable between 1 min, 3 mins or 5
mins. Default setting is 3 minutes.
2. Manual recording
Press the power button to start the unit. At the same time, recording starts
automatically. Press and hold the power button for 5 seconds, the unit will
automatically turn off after saving the video.
In standby mode, press the MIC button to enter video mode.
3. After changing to the video mode on the upper left side of the screen, press the
OK button, A picture is taken. Press the MIC button and press the OK button for 5
seconds and you will return to video mode.
4. Motion detection
Press the MENU button in the standby mode to display the setting screen. Press the
MIC button, select the movement vernier <Move Detection>, and set its status to
“On”. Press the REC button to enter the movement detection mode. If the lens
detects a foreign object moving, the unit will automatically enter video mode. If
everything has not changed before the lens within 60 seconds, the recording will
stop. Enter the setting screen, set the status to "OFF", and exit the movement
detection mode.
[Caution] Do not use motion detection in running shooting mode.
5. Gravity sensor
This device has a built-in gravity sensor. The device will automatically lock this video
if an accident occurs. A lock icon appears in the center of the screen.
[Note] The gravity sensor can adjust the sensitivity. By default, sensitivity is off. You
can change the sensitivity on the setting screen.
Basic operation and menu settings
5
6. Date and time settings
In standby mode, press the MENU button twice to display the setting
screen. Move the move vernier down and select "Date and Time". Press
the OK button to display the installation menu.
[Hint] Press the UP / DOWN buttons to select a number. Use the MENU
button to move to the next option. Confirm with the OK button.
[Appendix] The correct date and time are valid evidence of a traffic
accident, so
Set the date and time
7. USB mode
Connect the unit's USB interface to the computer via the data line. The screen
displays two modes: "Memory Card" mode and "Camera" mode. Press the UP /
DOWN button to select "Memory Card". Press the OK button to enter flash memory
mode.
[Hint] If you use a computer to copy the video, it is recommended to copy the video
in the micro SD card to the computer with a card reader.
8. Play the recording
Pressing the MIC button twice while in the ON state switches to playback mode. Use
the UP / DOWN buttons to find the file you want to play. Press the OK button to
start playing.
9. PC camera
Connect the unit's USB interface to the computer via the data line. The screen
displays two modes: "Memory Card" mode and "Camera" mode. UP
Press the / DOWN button to select “Camera”. Press the OK button to enter PC
camera mode.
When the drive program is installed on the computer, the camera icon is displayed
in "My Computer". Press twice to open the camera.
6
※ This instruction manual will be updated from time to time. Please refer to our official
email address for the latest version of the instruction manual. Official email address：
storage temperature
range
-20
C ~70
C
※ humidity 15% ~65% (RH) condensation
operating temperature
range
-10
C ~60
C
※ humidity 15% ~65% (RH) condensation
power supply voltage
DC12V/24V
external voltage
48mm×71mm×43mm（excl. protrusionsく）
weight
approx. 67 ｇ
CMOS image sensor
Aptina -AR0330
visible area
diagonal 170
°
resolution
FHD1920×1080 HD1280×720
number of video frames
30fps@1080P 60fps@720P
video compression method
H.264
video output systems
NTSC/PAL
screen size
1.5 inches
recording media
micro SD card（4GB～32GB）Class10 or above
Specifications
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
