Red Lion LGPBF is a foot-inch length counter that provides the same features as the standard Legend Plus Batch (LGPB) model with a few differences. The unit displays Process and Total count read-outs in feet and inches. A decimal point is used to separate the foot and inch units. All Process & Total presets are also displayed in feet and inches. The scaling for the Total count is the same as the Process counter.
The LGPBF is ideal for applications where it is necessary to measure and display length in feet and inches, such as in textile manufacturing, lumber processing, or metalworking. The unit can be used to track the length of material that has been processed, or to control the length of material that is being cut or formed.
Red Lion LGPBF is a foot-inch length counter that provides the same features as the standard Legend Plus Batch (LGPB) model with a few differences. The unit displays Process and Total count read-outs in feet and inches. A decimal point is used to separate the foot and inch units. All Process & Total presets are also displayed in feet and inches. The scaling for the Total count is the same as the Process counter.
The LGPBF is ideal for applications where it is necessary to measure and display length in feet and inches, such as in textile manufacturing, lumber processing, or metalworking. The unit can be used to track the length of material that has been processed, or to control the length of material that is being cut or formed.
Red Lion LGPBF is a foot-inch length counter that provides the same features as the standard Legend Plus Batch (LGPB) model with a few differences. The unit displays Process and Total count read-outs in feet and inches. A decimal point is used to separate the foot and inch units. All Process & Total presets are also displayed in feet and inches. The scaling for the Total count is the same as the Process counter.
The LGPBF is ideal for applications where it is necessary to measure and display length in feet and inches, such as in textile manufacturing, lumber processing, or metalworking. The unit can be used to track the length of material that has been processed, or to control the length of material that is being cut or formed.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI