2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Toro
  7. CE Kit, Model 78531 48in E-Z Vac Bagger

Toro CE Kit, Model 78531 48in E-Z Vac Bagger, CE Kit, Model 78541 48in DFS E-Z Vac Collection System Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro CE Kit, Model 78531 48in E-Z Vac Bagger Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3365-242RevA
CEKit
forModel78531and7854148inE-ZVac™Bagger
ModelNo.117-3827
ModelNo.117-3828
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemower.
Warningdecal1
2
Covermissingdecal
1
Installthedecals.
Blowercover1
Bolt(5/16x5/8inch)
1
U-nut1
Flatwasher(5/16inch)
1
3
Pushnut(5/16inch)
1
Installthecovers.
Leftguard
1
Backguard1
Frontguard1
Lowerguard1
Bolt(5/16x3/4inch)
2
4
Flangenut(5/16inch)
2
Installtheguards.
U-bolt(3/8x1inch)
2
Flangenut(3/8inch)
4
5
Weight3
Installthemountingbrackets.
1
PreparingtheMower
NoPartsRequired
Procedure
1.Thoroughlycleanmowerdeck.Alldebrismustbe
removedtoensurethekitwilltproperly.
2.Repairallbentordamagedareasandreplaceany
missingparts.
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
2
InstallingtheDecals
Partsneededforthisprocedure:
1Warningdecal
1
Covermissingdecal
Procedure
1.Removetheexistingblowercover(Figure2).Save
thehardware.
2.Cleantheareawherethedecalswillgo(
Figure1).
3.InstallthedecalsasshowninFigure1.
Figure1
1.Covermissingdecal
2.Warningdecal
3
InstallingtheCovers
Partsneededforthisprocedure:
1Blowercover
1
Bolt(5/16x5/8inch)
1U-nut
1
Flatwasher(5/16inch)
1
Pushnut(5/16inch)
Procedure
1.Removetheexistingbeltcover(Figure2).Saveall
existinghardware
2.Removethelatchfromthebeltcover.
3.Drilla11/32inchdiameterholewheretheexsitng
latchinthebeltcoverwasinstalled(
Figure2).
4.Installthebolt(5/16x5/8inch)intothecoverand
secureittothebeltcoverwithawasher(5/16inch)
andpushnut(5/16inch)(Figure2).
5.Installthebeltcoverandtightenthebolt(5/16x
5/8inch)(Figure2).
6.InstalltheU-nutintothebeltcoverbracket
(
Figure2).
7.Installthenewblowercover(Figure2).
g013158
6
7
8
Figure2
1.Existinghardware
5.Drilla11/32inchdiameter
holeinthebeltcover
2.Newblowercover
6.Flatwasher(5/16inch)
3.Existingbeltcover
7.Pushnut(5/16inch)
4.Bolt(5/16x5/8inch)
8.U-nut
2
4
InstallingtheGuards
Partsneededforthisprocedure:
1
Leftguard
1Backguard
1Frontguard
1Lowerguard
2
Bolt(5/16x3/4inch)
2
Flangenut(5/16inch)
Procedure
1.Removetheexistinghardwarearoundtheblowerfor
theleftguard,lowerguardandbackguard(
Figure3).
Saveallexistinghardware
2.Installtheleftguardwithexistinghardware
(
Figure3).
3.Installthebackguardwithexistinghardware
(Figure3).
4.Installthelowerguardwithexistinghardware
(Figure3).
5.Installthefrontguardwitha2bolts(5/16x3/4
inch)and2angenuts(5/16inch)(
Figure3).
Figure3
1.Existinghardware5.Frontguard
2.Leftguard6.Bolt(5/16x3/4inch)
3.Backguard7.Lowerguard
4.Flangenut(5/16inch)
3
5
InstallingtheMounting
Brackets
Partsneededforthisprocedure:
2
U-bolt(3/8x1inch)
4
Flangenut(3/8inch)
3Weight
Procedure
Donotusetheweightthatisshippedwiththebagger.
Installthe3weightsunderthefootpanwith2U-bolts
and4angenuts(3/8inch)(Figure4).
Figure4
1.U-bolt3.Flangenut
2.Weight
4
/