Fluance VB52 User guide

RECORD CARBON FIBER BRUSH

1. With the record spinning, place the brush on record perpendicular

to the record grooves

2. Gently hold on record for 2-3 rotations

3. Drag brush across and off the record at a 45° angle

4. Use brush cleaner built into handle to remove dirt and debris from

the brush

RECORD VELVET BRUSH

1. With the record on a at surface, place brush on record perpendicular to the record grooves

2. Gently drag brush around record 2-3 times

3. Drag brush off record at a 45° angle to remove dust

STYLUS BRUSH

1. Ensure tonearm is secure

2. Position stylus brush under stylus tip and gently drag the brush from back of stylus tip to the

front of the stylus

3. Be careful to only go in one direction and to fully remove brush before repeating

4. Repeat 2-3 times or until all debris is removed from the stylus

Quick Start Guide

VB52

Handle

Stylus Brush

Carbon

Fiber Brush

Velvet Brush

Stand