Furinno 11202, 11206 Assembly Instruction

  • Hello! I am an AI chatbot trained to assist you with the Furinno 11202 Assembly Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instruction
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Attach Shelf Panel(D)to L/R Side Panel(A)
using Screw(1).
STEP 8
Attach Door Panel(E)and Bottom Panel(D)to
the completed unit in Step 6, as shown:
STEP 7
Attach Handle(4)on Door Panel(E)using Short
Screw(5).
STEP 10
Attach Back Panel(F)to the unit using
Power Pin(6).
STEP 9
Recommended Maximum Weight
Furinno Pasir 3 Tier Bookcase
with Door w/Round Handle
1120220140416
MODEL :
11202
15.8”(W) x 31.5”(H) x 9.4”(D)DIMENSION :
10
10
10
10
*Unit in Pound(lbs)
(6)x 18pcs
(1)x 4pcs
Tool RequiredTool Required Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 15 minutesApprox. 20 minutesApprox. 30 minutes
STEP 5
Attach Door Panel(E)and Shelf Panel(C)to
the completed unit in Step 4, as shown:
Attach Shelf Panel(C)to L/R Side Panel(A)
using Screw(1).
STEP 6
STEP 3
Attach Door Panel(E)and Shelf Panel(C)to
the completed unit in Step 2, as shown:
Attach Shelf Panel(C)to L/R Side Panel(A)
using Screw(1).
STEP 4
STEP 1
1.1 Insert Screw(3B)and Door Support(2)
on Panel(E).
1.2 Insert Magnet(3A)on Panel(B),(C).
Note: Enlarge pre-drilled hole with Screw
before attach with Magnet(3).
Attach Top Panel(B)to L/R Side Panel(A)using
Long Screw(1).
STEP 2
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
16pcs
6pcs
3pcs
A 2pcs
L/R Side Panel
Magnet/Screw
No Hardware List Qty No QtyParts List
Long Screw
Door Support
4
5
6
3pcs
3pcs
18pcsPower Pin
Handle
Short Screw
B
C
1pcs
2pcs
Shelf Panel
Top Panel
D
E
F
1pcs
3pcs
1pcs
Back Panel
Bottom Panel
Door Panel
(1)x 4pcs
(1)x 4pcs
(1)x 4pcs
A
B
E
E
E
D
C
C
3A 3B
4A 4B
(2)x6pcs
(3B)x3pcs
(3A)x3pcs
/