Kmart 42894100 User manual

Brand: Kmart

Model: 42894100

Type: User manual

Kmart 42894100 is a ladder bookshelf with a maximum safe load of 5kg per shelf. It is made of metal and wood and comes with all the necessary hardware for assembly. The bookshelf is designed to be used indoors and in a domestic setting, and it should be placed on an even surface. It is important to note that the bookshelf should not be used until all screws are firmly secured, and it should not be used to stand or sit on.

Kmart 42894100 is a ladder bookshelf with a maximum safe load of 5kg per shelf. It is made of metal and wood and comes with all the necessary hardware for assembly. The bookshelf is designed to be used indoors and in a domestic setting, and it should be placed on an even surface. It is important to note that the bookshelf should not be used until all screws are firmly secured, and it should not be used to stand or sit on.

CARE INSTRUCTIONS:

WIPE CLEAN WITH A DAMP OR DRY CLOTH.CHECK AND TIGHTEN ALL PARTS REGULARLY. DO NOT USE ABRASIVE MATERIALS AND SOLVENTS. KEEP AWAY FROM WATER AND DIRECT

SUNLIGHT. PLACE ON AN EVEN SURFACE. STORE IN A DRY PLACE. FOR INDOOR AND DOMESTIC USE.

WARNING:

DO NOT STAND OR SIT ON THIS ITEM. DO NOT USE UNTIL ALL SCREWS ARE FIRMLY SECURED. USE ONLY ON A FLAT SURFACE. THIS PACKAGE CONTAINS SMALL PARTS AND SHARP POINTS.

KEEP AWAY FROM CHILDREN AND BABIES. ADULT ASSEMBLY REQUIRED. FAILURE TO FOLLOW THESE WARNINGS COULD IN SERIOUS INJURY. MAXIMUM SAFE LOAD: 5KG PER SHELF.

Assembly Instructions

AMetal Frame

G.Board

568x344x15mm

H.Board

568x244x15mm

I.Board

568x144x15mm

J.Screw

M7x48mm

M.Screw

M4x22mm

S.Screw

M4x12mm

T.Tapping

Screw

M4x35mm

U.Wall Plug

N.Screw Nut

M4mm

Q.Wrench

R.Wall

Anchor

K.Screw

M4x12mm

L.Hex Key

2pcs

2pcs

2pcs

1pcs

1pcs

4pcs

1pcs

1pcs 1pcs

1pcs

1pcs

1pcs

1pcs

1pcs

16pcs

1pcs

4pcs

4pcs

16pcs

C.Metal Frame

B.Metal Frame

D.Metal X Wire

E.Metal joint

F.Board

568x444x15mm

Tool Required:

L.Hex Key

Tool Required:

L.Hex Key

12

3 4 5 6

Tool Required:

L.Hex Key

Tool Required:

L & Q.Wrench

Screw to the wall

Tool Required:

L.Hex Key

IHGF

J

J

JJ

J

J

J

JJ

J

J

J

J

J

J

J

SRU

R

N

N

NN

MM

M

M

D

T

ATTENTION:

DO NOT TIGHTEN THE SCREWS

FULLY DURING ASSEMBLY.

FULLY TIGHTEN SCREWS AFTER

THE FINAL ASSEMBLY STEP.

Attach the screws slightly. Fasten all screws tight after lifting the shelf up

straight and make sure the two side frames stand evenly on a flat floor.

seek advice from a qualified trades person

on how to attach this to your specific wall.

Part D should be on the opposite side

(straight side, not diagonal side)

A

K

K

B

E

B

K

K

E

A

K

K

C

C

•It is strongly recommended that this product is permanently fixed to the wall.

•Please seek professional advice if you are in doubt of what fixing device to use.

•Regularly check that anchors are securely maintained.

•Stability of tall items may be affected by thick pile carpet or uneven floors.

•Do not place unanchored televisions on furniture.

Caution! When attaching the anchor fixings, check for any electrical wires

or plumbing behind the wall before drilling any holes

(if you are unsure please seek professional advice from a qualified tradesperson).

LADDER BOOKSHELF42894100

1

Kmart 42894100 User manual

Brand: Kmart

Model: 42894100

Type: User manual

Kmart 42894100 is a ladder bookshelf with a maximum safe load of 5kg per shelf. It is made of metal and wood and comes with all the necessary hardware for assembly. The bookshelf is designed to be used indoors and in a domestic setting, and it should be placed on an even surface. It is important to note that the bookshelf should not be used until all screws are firmly secured, and it should not be used to stand or sit on.

Related papers

Other documents