PROLINK PRO2211W User manual

Category
Monitors CRT
Type
User manual

This manual is also suitable for

PROLINK PRO2211W boasts impressive capabilities for handling multimedia content and facilitating comfortable viewing experiences. With its high resolution of 1680 × 1050 @ 60Hz, users can immerse themselves in sharp and detailed visuals. The 16.7M high-quality image color reproduction further enhances the visual experience, delivering vibrant and realistic colors. Additionally, the monitor's quick 2ms response time ensures smooth transitions and minimizes motion blur, making it ideal for fast-paced gaming or action-packed movies.

PROLINK PRO2211W boasts impressive capabilities for handling multimedia content and facilitating comfortable viewing experiences. With its high resolution of 1680 × 1050 @ 60Hz, users can immerse themselves in sharp and detailed visuals. The 16.7M high-quality image color reproduction further enhances the visual experience, delivering vibrant and realistic colors. Additionally, the monitor's quick 2ms response time ensures smooth transitions and minimizes motion blur, making it ideal for fast-paced gaming or action-packed movies.

USER'S MANUAL
PROLiNK LCD MONITOR
PRO1911W & PRO2211W
Version 1.2 (Feb’09)
your
Global
Communications
Info
Provider
Bangladesh | Brunei | Cambodia | Fiji | Indonesia | Madagascar | Maldives
Malaysia | Mauritius | Mongolia | Myanmar | Nepal | Pakistan | Philippines
Singapore | Sri Lanka | Serbia | Taiwan | Thailand | USA | Vietnam
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) i
TABLE OF CONTENTS
FCC Statement 1
Important Safeguard 2
Chapter 1 Introduction 3
1.1 Features 3
1.2 Checking List 3
Chapter 2 Monitor Overview 4
2.1 Front Panel overview 4
2.2 Rear Panel overview 5
Chapter 3 Installation 6
3.1 Connecting a Computer 6
3.2 Connecting a Laptop 6
3.3 Connect with Audio 6
Chapter 4 Operation 7
4.1 Power (ON/OFF) Switch Button 7
4.2 Power LED/Indicator 7
4.3 Auto 7
4.4 Menu Features 7
4.5 OSD Menu 7
Chapter 5 Technical Information 11
5.1 Product Specifications 11
5.2 Troubleshooting 11
Chapter 6 Technical Support 13
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 1
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Re-orientate or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 2
Important Safeguard
1. Read all of these instructions.
2. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
3. Do not use this monitor near water. For example near a bathtub, washbowl , kitchen sink, or
laundry tub, in a wet basement , or near a swimming pool, etc…
4. Do not place this monitor on an unstable cart, stand, or table. The monitor may fall, causing
serious injury to a child or adult, and serious damage to the appliance. Use only with a cart or
stand recommended by the manufacturer or sold with monitor. Only use mounting kit(s) that are
approved by the manufacturer. Any wall or shelf mounting are to be done in accordance to the
instructions set by the manufacturer.
5. Slots and openings in the cabinet such as the back or bottom should be provided for ventilation.
To insure reliable operation of the television receiver and to protect it from overheating, these
openings must not be blocked or covered. The openings should never be blocked by placing the
monitor on a bed, sofa, rug or any other similar surface. This monitor should also not be placed
in a bookcase unless proper ventilation is provided.
6. Do not allow anything to rest on the power cord. Do not position this monitor where the cord will
be susceptible to damage.
7. Do not insert any objects into this monitor through cabinet slots as they may hit dangerous
voltage points or damage mechanical parts that could result in permanent damage or electric
shock. Never spill liquid of any kind onto the monitor.
8. Do not attempt to service this monitor yourself since opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
9. Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under
the following :
a) When the power cord or plug is damaged or frayed.
b) If liquid has been spilled onto the monitor.
c) If the monitor has been exposed to rain or water.
d) If the monitor has been dropped or the cabinet has been damaged.
e) When the monitor exhibits a distinct change in performance. This indicates the need for
servicing.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 3
Chapter 1 Introduction
1.1 Features
9 High resolution of 1440 × 900 @ 60Hz (for PRO1911W), 1680 × 1050 @ 60Hz (for
PRO2211W)
9 Contrast ratio of 5000 : 1 (for PRO1911W), 10000 : 1 (for PRO2211W)
9 0.28mm Pixel Pitch
9 Response time of 2ms (milliseconds)
9 Brightness of 300 cd/m2
9 16.7M high quality image color
9 Microprocessor based with OSD (On Screen Display) control.
9 Compatible with standard IBM VGA, extended VGA, super VGA, IBM XGA modes, as well
as VESA resolution standards.
9 Universal Power Supply.
9 Microsoft Windows 9x/2000/XP compatible & VESA Display Data Channel (DDC) 1/2B
compatible.
9 Save spaces as monitor is slim in design.
9 Power saving.
9 Smart model image screen setting
9 Auto function which will automatically adjust the signal to the best settings.
1.2 Checking Lists
Please make sure the following items are included with your LCD monitor:
9 Monitor 9 User Manual
9 AC power cord 9 Audio cable
9 Signal cable 9 DVI signal cord (Optional)
If any of these items are missing, please contact your dealer for technical support.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 4
Chapter 2 Monitor Overview
2.1 Front Panel overview
OSD Main Menu
Up button
Down button
Exit button
Power LED/Indicator
Power button
19” for
PRO1911W
22” for
PRO2211W
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 5
2.2 Front Panel overview
VGA
Connector
DVI
Connector
Audio
Connector
Note:
For VOLUME function, please ensure the audio is connected to the sound card of the computer or
to the output source of any media player with 3.5mm stereo socket.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 6
Chapter 3 Installation
Whenever you connect a video system to your set, ensure that all elements are switched off. Refer to
the documentation supplied with your equipment for a detailed connection instructions and safeguard
information.
3.1 Connecting a Computer
3.1.1 Unplug or disconnect the signal cord connector from your existing PC video connector
and LCD/CRT Monitor, IF ANY,
3.1.2 Plug in or connect the signal cord connector to the PC video connector,
3.1.3 Plug in or connect the power cord to the LCD Monitor, and
3.1.4 Turn power plug socket switch ON to supply voltage to both PC and Monitor,
3.1.5 Turn power button switch ON for both PC and Monitor,
3.1.6 For most OS, Monitor is Plug & Play without driver installation required.
3.2 Connecting a Laptop
Ensure the Laptop comes with a video output connector, then follow the procedures stated
below:
3.2.1 Unplug or disconnect the signal cord connector from your existing PC video connector
and LCD/CRT Monitor, IF ANY,
3.2.2 Plug in or connect the signal cord connector to the Laptop's video output connector,
3.2.3 Plug in or connect the power cord to the LCD Monitor, and
3.2.4 Turn power plug socket switch ON to supply voltage to both PC and Monitor,
3.2.5 Turn power button switch ON for both Laptop and Monitor,
3.2.6 Press video output button from Laptop with special key combination (different
combination in various type of laptop).
3.3 Connecting an Audio
3.3.1 Connect the stereo audio cable to the “PC AUDIO IN(STEREO) jack to the rear of your
LCD monitor and the other end to the “Audio Out” jack of the sound card on your
computer.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 7
Chapter 4 Operation
4.1 Power (ON/OFF) Switch Button
This button is used to turn the monitor on and off.
NOTE: The ON/OFF switch button does not disconnect the device from the main voltage. To
completely disconnect the main voltage, please remove the power plug from the socket.
4.2 Power LED/Indicator
GREEN lights indicate that the monitor operates normally.
Blinking GREEN lights indicate that there is no input signal from computer.
DARK (no lights) indicates that the monitor is turned off.
4.3 Auto
Press AUTO button and release, the auto adjust display mode will tune to the utmost
performance according to VGA settings.
4.4 Menu Features
The following features can be accessed using monitor on screen menu system.
Press button to move menu selection up or adjust increasing.
Press button to move menu selection down or adjust decreasing.
Press MENU button to confirm selection or setting.
Press EXIT button to go back to previous menu, or exit from the screen menu system.
4.5 OSD Menu
Main Menu
OSD Main Menu gives user an overview of the selection of controls available. When the user
wants to adjust the screen image, the user will press and release the Menu button.
The OSD Main Menu consists of:
1. Color Adjustment
2. Image Adjustment
3. Color Temperature Adjustment
4. OSD Tools
5. Language
6. Misc
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 8
1. Color Adjustment
1.1 Brightness adjustment
To adjust the image brightness to suit the user viewing requirements.
1.2 Contrast adjustment
To adjust the image contrast to obtain the best display on screen.
1.3 DCR Mode (option)
To select DCR ON or OFF
2. Image Adjustment
2.1 Horizontal position adjustment
To move the picture image horizontally left or right.
2.2 Vertical position adjustment
To move the picture image vertically up or down.
2.3 Phase adjustment
To improve focus clarity an image stability.
2.4 Clock adjustment
To increase or decrease the horizontal size of image.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 9
3. Color Temperature Adjustment
3.1 Warm
This control adjusts the color temperature of the screen image, preset by default.
3.2 Cool
This control adjusts the color temperature of the screen image, preset by default.
3.3 User
Increase or decrease red, green or blue depending on user viewing requirements.
4. OSD Tools
4.1 OSD Horizontal Position
To move the OSD image horizontally left or right.
4.2 OSD Vertical Position
To move the OSD image vertically up or down.
5. Language
Various type of OSD languages available as:
9 English 9 Italian
9 Spanish 9 German
9 French 9 Chinese
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 10
6. Misc
6.1 Auto Configuration
To automatically get the best adjustment.
Not function with DVI signal.
6.2 Auto Color
To automatically get the best color adjustment.
Not function with DVI signal.
6.3 Factory Reset
To reset all setting back to factory default settings.
Not function with DVI signal.
6.4 Volume
To adjust monitor volume.
6.5 Image Ratio (Optional)
Select between 16:9 and 4:3
6.6 Signal Source (Optional)
Select between PC-VGA and PC-DVI (Optional)
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 11
Chapter 5 Technical Information
5.1 Product Specifications
ITEM DESCRIPTION
Model Number PRO1911W 19" LCD Monitor PRO2211W 22" LCD Monitor
Bezel color Options Black Full black or Full Silver
TFT Panel 16:10 16:10
Pixel Pitch (mm) 0.28 0.28
View Angle H: 150˚ V: 135˚ H:160˚ V:160˚
Resolution (Typical) 1440 × 900 @ 60Hz 1680 × 1050 @ 60Hz
Contrast Ratio (max) 5000:1 10000:1
Brightness 300 cd/m2 300 cd/m2
Response Time 2ms 2ms
Color 16.7M 16.7M
OSD Language En
g
lish, German, French, Italian,
Spanish, Chinese
En
g
lish, German, French, Italian,
Spanish, Chinese
Speaker With speaker (2W × 2) With speaker (2W × 2)
DVI Optional Optional
Power Input 100~240V, 50/60Hz 100~240V, 50/60Hz
Power Consumption (max) 40 W 50 W
Certification CE, CB, FCC CE
Packing Dimension (mm) Subject to Changes Subject to Changes
Weight (kg) 5.3KG/6.5KG 5.0KG/7.0KG
5.2 Troubleshooting
Before calling for service, check the information in this section to see if you can remedy any
problems. Should you require any further assistance, please contact the dealer from whom you
purchased the LCD monitor.
5.3.1 There is no SCREEN image
Check if the power cord is securely connected to the monitor, the adapter and the
wall outlet.
Check if the signal cable is connected between the monitor and the computer.
Check if the monitor is in power saving mode.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 12
5.3.2 Display image is too large or small
Use the OSD controls to adjust Auto Setup.
5.3.3 The color are distorted
Check if the signal cable is properly connected.
Use the OSD controls to adjust the color control setting.
5.3.4 The image is too light or too dark
Use the OSD controls to adjust the brightness and contrast.
5.3.5 There is no sound or sound is low
Check the sound cable connection.
Make sure the computer sound program is working.
Adjust the volume on sound setting. Adjust your sound card or computer volume
setting.
Adjust the volume control keys on the monitor.
5.3.6 The screen appearing up and down H-rolling scan
Make sure the view of input signal is within the order of the monitor (60Hz –
75Hz)
5.3.7 How to clean the monitor
Make sure monitor is turn off.
Do not spray any liquid on the screen.
Use clean, soft and no fur cloth to clean the monitor screen.
A little non-ammonia liquid and non-alcohol glass cleaner is allowed to be used for
cleaning.
5.3.8 How to clean the cabinet
Use soft dry cloth
A little non-ammonia liquid and non-alcohol of non-abrasion cleanser is allowed to
use for cleaning the surface.
PROLiNK User's Manual for PRO1911W, PRO2211W www.prolink2u.com
Version 1.2 (Feb’09) 13
Chapter 6 Technical Support
Register online for your free warranty.
FREE TECHNICAL SUPPORT HOTLINE:
Mon to Fri: 9am - 6pm
(Closed on Sundays & Public Holidays)
Singapore : (65) 6357 0666
Malaysia : (60) 3 8023 9151
Indonesia : (62) 21 628 3205
WALK-IN:
Mon to Fri: 9am - 6pm
(Closed on Saturdays , Sundays & Public Holidays)
Singapore
FIDA INTERNATIONAL (S) PTE LTD
Blk 16 Kallang Place #06-02
Kallang Basin Industrial Estate Singapore 339156
Malaysia
FIDA SYSTEMS (M) SDN BHD
29 USJ 1/31, 47600 Subang Jaya Selangor,
Darul Ehsan, Malaysia
Indonesia
PROLiNK INDONESIA
P.Jayakarta Komplek 85 BR/AJ, Jakarta Pusat, Indonesia
ONLINE TECHNICAL SUPPORT:
Version 1.2 (Feb’09) 14
Register Online For Your Product Warranty
www.prolink2u.com
Singapore
FIDA INTERNATIONAL (S) PTE LTD
Blk 16 Kallang Place #06-02
Kallang Basin Industrial Estate Singapore 339156
Malaysia
FIDA SYSTEMS (M) SDN BHD
Tel: (60) 3 8023 9151
Indonesia
PROLINK INDONESIA
Tel: (62) 21 628 3205
PROLiNK is manufactured under the authority of FIDA INTERNATIONAL (S) PTE LTD
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

PROLINK PRO2211W User manual

Category
Monitors CRT
Type
User manual
This manual is also suitable for

PROLINK PRO2211W boasts impressive capabilities for handling multimedia content and facilitating comfortable viewing experiences. With its high resolution of 1680 × 1050 @ 60Hz, users can immerse themselves in sharp and detailed visuals. The 16.7M high-quality image color reproduction further enhances the visual experience, delivering vibrant and realistic colors. Additionally, the monitor's quick 2ms response time ensures smooth transitions and minimizes motion blur, making it ideal for fast-paced gaming or action-packed movies.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI