Tuftex 2213D Dimensions Guide

Brand
Tuftex
Model
2213D
Type
Dimensions Guide

This manual is also suitable for

Tuftex 2213D is a versatile and durable roofing and siding solution designed to withstand various weather conditions. Made from top-quality materials, it offers exceptional load-bearing capacity and light transmission.

With a panel width of 26 inches, a corrugation height of 9/16 inches, and standard lengths ranging from 8 to 12 feet, Tuftex 2213D can be used in both residential and commercial applications. It is available in a variety of colors and profiles, making it a suitable choice for different architectural styles.

Tuftex 2213D is designed to be easy to install. It can be cut using a pair of snips, a circular saw, or a fine-tooth hand saw. The panels are secured using aluminum nails with washers, and all side and end laps should be sealed with a silicone sealer.

Tuftex 2213D is a versatile and durable roofing and siding solution designed to withstand various weather conditions. Made from top-quality materials, it offers exceptional load-bearing capacity and light transmission.

With a panel width of 26 inches, a corrugation height of 9/16 inches, and standard lengths ranging from 8 to 12 feet, Tuftex 2213D can be used in both residential and commercial applications. It is available in a variety of colors and profiles, making it a suitable choice for different architectural styles.

Tuftex 2213D is designed to be easy to install. It can be cut using a pair of snips, a circular saw, or a fine-tooth hand saw. The panels are secured using aluminum nails with washers, and all side and end laps should be sealed with a silicone sealer.

1
(See Tuftex Installation Guide for more information.)
Specifications
Specs and Installation Tips
Panel Width: 26” U.S. Standard
Corrugation Height: 9/16”
Panel Length: 8’, 10’, 12’ Standard and 14’, 16’ available in some colors/
profiles by special order
Aluminum Nails: 1 3/4” with washers, 100 per box, 24 boxes per case
Nails per panel: 8’ = 25 nails 10’ = 30 nails 12’ = 35 nails
Closures: Foam Closures = 3’ length (pack of 5)
Wood Closures = 6’ length (minimum order of 24)
Round profile for SeaCoaster
Square profile for UltraVinyl & PolyCarb
Light Transmission: SeaCoaster Translucent Clear--75%
SeaCoaster Translucent White--70%
UltraVinyl Grow Clear--93%
PolyCarb Clear--93%
PolyCarb Translucent White--78%
PolyCarb Smoke--84%
Load Bearing Capacity on 24” Centers:
SeaCoaster = 90 lbs./sq. ft.
UltraVinyl = 90 lbs./sq. ft.
PolyCarb = 115 lbs./sq. ft.
Panels Packaged in Bundles of 10
Freight Prepaid on Orders of 100 Panels
To Remove Panel Labels: Use either mild detergent or mild citrus-based cleaner.
Visit us on the web at www.tuftexpanel.com or call 800-777-7663.
2
(See Tuftex Installation Guide for more information.)
Installation Tips
Specs and Installation Tips
Storage: Do not stack Tuftex in direct sunlight or in an enclosure subject to
very high temperatures. Vertical storage indoors is preferred.
Cutting: Cut single panels with a pair of snips or heavy duty scissors.
Multiple panels can be cut with a circular saw (plywood blade
reversed) or a fine tooth hand saw.
Side and End Laps: Seal all side and end laps with a silicone sealer. Overlap
sides of panel one corrugation and overlap ends a maximum of 4”.
Pitch: Plan a minimum of 1” pitch per foot of run. In heavy snow areas,
plan up to 3”pitch per foot. Greater pitch = less likelihood of leaks.
Crossbrace Support Structure: Install Tuftex Vinyl panels on a maximum of
24” on center. Tuftex PolyCarb can span 36” on center.
Heat and Temperature Issues: Choose the right product for your project. For
projects in high heat or cold areas where the surface temperature
ranges from +270°F to -40°F select Tuftex PolyCarb. Vinyl
Opaque panels are suitable for all weather conditions and surface
temperatures up to 150°F. Vinyl Translucent and Clear panels are
to be installed for use in milder weather conditions only, and are
not recommended for locations with high UV or surface
temperatures that can exceed 125°F. Never install Tuftex panels
directly over dark colored rafters or closure strips. For best results,
paint (white) the top edge of the rafter or closure strip that is
exposed to sunlight. Do not overlap or apply over existing roofing
or lattice.
Ventilation: All Tuftex covered structures need adequate ventilation to control
condensation and ensure coolness. If high heat may develop
choose Tuftex PolyCarb panels for your project.
Nailing: Important - Pre-drill all fastening holes. Always pre-drill holes
prior to fastening panels. The diameter of the hole must be 2/16 to
3/16 larger than the diameter of the shaft of the fastener. Do not
over-tighten fasteners.
Visit us on the web at www.tuftexpanel.com or call 800-777-7663.
  • Page 1 1
  • Page 2 2

Tuftex 2213D Dimensions Guide

Brand
Tuftex
Model
2213D
Type
Dimensions Guide
This manual is also suitable for

Tuftex 2213D is a versatile and durable roofing and siding solution designed to withstand various weather conditions. Made from top-quality materials, it offers exceptional load-bearing capacity and light transmission.

With a panel width of 26 inches, a corrugation height of 9/16 inches, and standard lengths ranging from 8 to 12 feet, Tuftex 2213D can be used in both residential and commercial applications. It is available in a variety of colors and profiles, making it a suitable choice for different architectural styles.

Tuftex 2213D is designed to be easy to install. It can be cut using a pair of snips, a circular saw, or a fine-tooth hand saw. The panels are secured using aluminum nails with washers, and all side and end laps should be sealed with a silicone sealer.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents