PROJECT SOLUTIONS
onduline-usa.com
onduline-usa.com
Contents
1.0 TUFTEX 6
PolyCarb 6
UltraVinyl 8
SeaCoaster 9
DeckDrain 10
2.0 ONDURA 12
Sheets 12
Ondura Jumbo 14
Ondura 6V 15
ONDURA-9 16
Tiles 17
3.0 ONDUVILLA 18
Onduline North America, Inc., founded in Virginia
in 1976, is a manufacturer of roong materials and
building products in the United States. Onduline
North America’s brands include TUFTEX®, ONDURA®,
and ONDUVILLA®.
Onduline North America is a member of the interna-
onal Onduline Group.
The Onduline Group is a global leader in innovave
residenal and commercial roong products with
headquarters in Paris, France, and 70 years of indus-
try experience. Onduline’s lightweight roong materi-
als are used worldwide for many residenal, commer-
cial, agricultural, and industrial applicaons. Onduline
has operaons on 5 connents with 10 producon
sites and 45 subsidiaries.
Simplicity
Our products are simple, accessible and easy to in-
stall, so that each of our customers and users can feel
in harmony with them.
Reliability
The reliability of our materials and components is the
result of a unique experse.
Commitment
We are commited to serving our customers and our
environment today, and tomorrow.
3
ONDURA®
ONDURA® Tiles
TUFTEX
ONDUVILLA®
TUFTEX
TUFTEX
TUFTEX
5
TUFTEX
®
P
Virturally unbreakable polycarbonate panels perfect for extreme temperatures.
TECHNICAL CHARACTERISTICS
HEAT RESISTANT
*
26-in
9/16-in
6
IMPACT RESISTANT
PROFILE
TRANSLUCENT
*Availability based on our current stock.
THAN THE DIAMETER OF THE
FASTENER
CLEAR
TRANSLUCENT WHITE
SMOKE
Closure Strips
TUFTEX
Panels
Fasteners
TUFTEX ACCESSORIES
TUFTEX
®
U
Durable and heavy-duty weather resistant panels available in a range of aracve colors.
*Ten-foot panels also known as TUFTEX DeckDrain™.
TECHNICAL CHARACTERISTICS
HEAT RESISTANT
*
26-in
9/16-in
8
PROFILE
OPAQUE OR
TRANSLUCENT
OPAQUE WHITE
OPAQUE TAN
*Availability based on our current stock.
THE DIAMETER OF THE
FASTENER
9
TUFTEX
®
S
Lightweight weather resistant panels perfect for climates with snow.
TECHNICAL CHARACTERISTICS
ECONOMICAL
*
26-in
9/16-in
ROUND WAVE
PROFILE
EASY TO INSTALL
CRYSTAL CLEAR
OPAQUE WHITE
OPAQUE TAN
EASY TO CLEAN
*Availability based on our current stock.
TUFTEX
®
D
The aordable, aracve deck ceiling and drainage system.
*Also known as TUFTEX UltraVinyl™ ten foot panels.
TECHNICAL CHARACTERISTICS
PROFILE
26-in
9/16-in
-
silicone sealant
30
10
EASY TO INSTALL
OPAQUE WHITE
OPAQUE TAN
ACCESSORIES
#2310
Before
OF THE FASTENER
TUFTEX® DeckDrain™ turns an unused under-deck space into an enhanced living area. The corrugated design carries
rainwater away, and creates sheltered, usable space that will look great and add value to your home for years to
come.
n
Creates a dry, cool, protected area for kids, pets and entertaining
n
Builds a ceiling under your deck and puts wasted space to use for storage
n
26-inch wide panels are available in tan or white in 10-foot lengths
n Our slope building brackets and fasteners make installing the panels an easy project
INSTALLATION
Installaon is simple
with our detailed
installaon guide.
11
Tap a nail into the boom of the end
joist and secure the string to it.
String
Secure a nail or dowel into the boom of the end joist,
pull string ght and secure to nail at the proper depth
according to the formula of no less than 1” of slope for
every 10’.
To compensate for uneven
joists, use the easy ‘string’
method pictured at the right,
before aaching slope building
brackets. The 1st bracket is
installed on the third joist from
the end. Subsequent brackets
are aached approximately
1/4” lower on every other joist
to create a slope (see diagram
below). If your deck is large,
pitch it two ways from the
center. Minimum Slope = 1˝
per 10´. If you have a run longer
than 10’ increase your slope
to 2”.
First Slope Building Bracket: Aach your rst bracket to the third joist.
Joists
IMPORTANT: Make sure water will ow over the lap and NOT under.
Water Flow
Aach addional bracket to every other
joist working your way across. As you
aach a new bracket, lower it approx.
1/4” to create your slope.
End Lap: varies according to your
deck but should be no less than 4˝.
(Header Board, cross secon to show joists.)
First Joist:
Tuex panel starts here and
screws directly into the joist
(no slope building bracket
needed).
Step 1: Aach the Brackets to Create
the Proper Drainage
Step 2: Aach DeckDrain™ Panels
79-in
48-in
ONDURA
®
The original lightweight corrugated sheet, perfect for roong and siding.
TECHNICAL CHARACTERISTICS
QUIETER THAN
METAL
12
1/8-in
1-3/8-in
2
2
3:12
*
SEALSMART
TM
EASY TO
INSTALL
12
*Please refer to all local building codes before starng any project.
CANNOT RUST
REPAINTED
RED
WHITE
TAN
ACCESSORIES
#803
20-IN X 26-IN #811
Ridge Cap
Foam Closure Strips
ONDURA Sheets,
ONDURA-9, or
ONDURA Tiles
Fasteners
13
*Please refer to all local building codes before starng any project.
ONDURA
®
A smaller version of the original ONDURA sheet, perfect for sheds and small projects.
TECHNICAL CHARACTERISTICS
26.3-in
12
1/8-in
1-3/8-in
2
2
16
3:12
*
SOLD IN PACKS OF 12
26.3-in
48-in
RED
#2353
#2358
#2356
79-in
44-in
ONDURA
®
6V
Lightweight corrugated sheets designed for easier installaon.
TECHNICAL CHARACTERISTICS
1/8-in
1-3/8-in
2
2
5
3:12
*
15
*Please refer to all local building codes before starng any project.
#160
RED
#163
#168
#166
16
*Please refer to all local building codes before starng any project.
ONDURA
®
A narrower version of the original ONDURA sheet, perfect for quick projects.
TECHNICAL CHARACTERISTICS
QUIETER THAN
METAL
36-in
9
1/8-in
1-3/8-in
2
2
6-1/2
3:12
*
SEALSMART
TM
EASY TO
INSTALL
79-in
36-in
8 COLORS
Before
CANNOT RUST
19-3/4-in
48-in
ONDURA
®
Tiles
Lightweight corrugated les, ideal for a variety of applicaons and projects.
TECHNICAL CHARACTERISTICS
QUIETER THAN
METAL
12
1/8-in
1-3/8-in
2
2
3:12
*
SEALSMART
TM
EASY TO
INSTALL
*Please refer to all local building codes before starng any project.
8 COLORS
CANNOT RUST
ONDUVILLA
®
The most complete system for your roof--aracve, simple and reliable.
TECHNICAL CHARACTERISTICS
AESTHETIC
16-in
1/8-in
1-3/5-in
2
10
3
2:12
*
SEALSMART
TM
EASY TO
INSTALL
16-in
*Please refer to all local building codes before starng any project.
18
ACCESSORIES
S
16-in
PAINTED COLORS
TERRACOTTA
#PS651
TUSCANY RED #PS653
#P689
ONDULAIR Slim
#PS686
38-in
Slim Cap
Apron Piece
Vented Closure
Strips
Flashing Band
Slim Cap
Closure Cap
Verge Piece
ONDULAIR
®
Slim
Flashing Adapter
19
ONDULINE RED
TERRACOTTA
#P691
#P693
ONDULINE
®
F
Versale aluminum ashing tape featuring a resilient butyl adhesive.
TECHNICAL CHARACTERISTICS
INSTALL IN LOW
TEMPERATURES
EASY TO INSTALL
#698
#P696
NO SPECIAL TOOLS
20
FOR USE WITH ONDURA
®
AND ONDUVILLA
®
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Tuftex 1413A User manual
-
Ondura 3208 Installation guide
-
ONDULINE P703 Operating instructions
-
Tuftex 2213D Dimensions Guide
-
Tuftex 1413A Dimensions Guide
-
Ondura 702 Operating instructions
-
Closure Vent CV1-Classic/1200each/PALLET Operating instructions
-
Closure Vent CV3-Classic/EA Operating instructions
-
Gibraltar Building Products 03228 Operating instructions
-
Bauhaus 30X30CM Installation guide
