SMART Technologies UF75 (i5 systems) User guide

Brand: SMART Technologies

Model: UF75 (i5 systems)

Type: User guide

www.smarttech.com/support www.smarttech.com/contactsupport

99-01182-20 A0

Addendum to the SMART Board™ 600i5

Interactive Whiteboard System User’s Guide

Changing your projector’s

aspect ratio for use with your

SMART Board 690 interactive

whiteboard

Before aligning the projector image on your SMART Board™ 690 interactive whiteboard, you must

change the native aspect ratio on your SMART UF75w projector to 16:9. You don’t need to

perform this step with any other model of interactive whiteboard.

CAUTION

Changing other settings in the projector’s service menu could damage or affect the operation

of your projector and invalidate your warranty. See the “Accessing the Service Menu” section

in the SMART Board 600i5 Interactive Whiteboard System User’s Guide

(smarttech.com/kb/154549

) for more information.

To change the aspect ratio of your projector

1. Turn on your projector.

2. Quickly press the following buttons on the remote control to access the service menu: Down,

Up, Up, Left, Up.

3. Scroll to the WXGA_720P_MODE field.

4. Press Right once on your remote control, or until 16:9 aspect ratio appears.

5. Scroll to the Exit field, and then press Enter on the remote control to exit the projector service

menu.

of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Patent

No. US5448263; US6141000; US6320597; US6326954; US6337681; US6540366; US6741267; US6747636; US7151533; US7289113; US7499033; US7626577;

US7687736; US7757001; CA2058219; and CA2252302. Other patents pending. Contents are subject to change without notice. 03/2011.

SMART Technologies UF75 (i5 systems) User guide

SMART Technologies UF75 (i5 systems) User guide

SMART Technologies UF75 (i5 systems) User guide

Related papers

Other documents