Salsbury Industries 4145P-BLK Installation guide

Brand: Salsbury Industries

Model: 4145P-BLK

Type: Installation guide

This manual is also suitable for

Salsbury Industries 4145P-BLK is a column mailbox designed for recessed mounting. It features a fully assembled construction and comes ready for installation. The mailbox is made of high-quality materials and is built to last. It is also easy to install and can be modified to fit different types of columns and mounting surfaces. The 4145P-BLK is a great choice for both residential and commercial applications.

Here are some of the features and benefits of the Salsbury Industries 4145P-BLK:

Fully assembled - The mailbox comes fully assembled and ready to install. This saves you time and hassle.

Here are some of the features and benefits of the Salsbury Industries 4145P-BLK:

Fully assembled - The mailbox comes fully assembled and ready to install. This saves you time and hassle.

SALSBURY INDUSTRIES

1010 East 62

Street, Los Angeles, CA 90001-1598

Phone: 1-800-624-5269 Int’l Phone: 323-846-6700

Fax: 1-800-624-5299 Int’l Fax: 323-846-6800

Column Mailboxes – 4145

Recessed Mounted Installation Instructions

Thank you for selecting Salsbury’s 4145 Column Mailbox. We are confident that the quality and construction of the box will prove to be a good

investment. The unit is fully assembled and ready for installation. These instructions are intended to assist you in a typical installation. They can be

modified depending upon your choice in column style, materials and fastening. It is recommended to have the unit present before starting the

construction to obtain the best possible installation.

Mailbox and Rough Opening Dimensions

Installation

1. Remove the screw on the left side of sheet metal box that is

holding the brass flap closed for shipment. Do not install box into

rough opening until this screw is removed.

2. Ensure that the rough opening is larger than the sheet metal

box, especially in the upper area of the opening. If the rough

opening is too small and the box must be forced into the opening, it

may press on the sheet metal box and interfere with opening the

brass flap.

3. Do not let the cement mortar touch the sides of the mailbox

sheet metal box. The weight of the cement could push on the box

sidewall and interfere with opening the brass flap.

4. It is strongly suggested, when installing the mailbox into a masonry

structure, that the mailbox be made removable by using screws to

attach the sheet metal box into the rough opening. Any mailbox can

develop unseen problems in the future, such as damage from

vandalism. It is much easier to replace or repair the mailbox if it is

removable.

Notes

1. Column or wall opening and lumber frame must be square.

2. Store keys in a safe place until ready for use.

3. Hardware is not included to fasten unit into rough opening.

Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.