MOUNTDOG MountDog LED Ring Light 14 inch Dimmable Selfie Ring User manual

Type
User manual
Dimmable LED Ring Light
User Manual
Package Contents Specifications
Assembly Instructions
Safety Instructions
LED Ring Light x 1 Power Adaptor x 1
Mobile Phone Holder x 1
Mobile Phone
Remote Shutter x 1
Carry Bag x 1
Adjustable Tripod x 1
Rated Voltage
Power
Color Temperature
Brightness
Color Rendering Index
Overall Dimensions
(L x W x H)
Adjustable Height
from 110 V to 240 V
40 W
From 3200 K to 5500 K
2500 LM
≥ 90
21 1/4”x16 5/16”x3 3/4”
(54 x 41.5 x 9.5 cm)
From 34 5/8” to 57 11/16”
(from 88 cm to 146.5 cm)
1
Loosen the bottom knob and pull down the three legs of the tripod.
After that, retighten the bottom knob.
2
Loosen the 3 height adjustment knobs to adjust the height of the tripod.
Remember to retighten the knobs after adjusting the height. After that,
take out the rubber cover on the top of the tripod.
Install the LED ring light on the top of the tripod. Fasten the side knob to
secure the LED ring light.
3
4
Insert the holder base to the groove on the LED ring light.
Connect the adaptor with the power cord of the LED ring light.
Rotate them reversely to lock them together. Connect the power adaptor
to a power outlet.
5
1.Keep the reflector away from heating sources and inflammable items
for safety concerns.
2.Any installation must not be carried out unless all the powers are turned
off.
3.The voltage applied on the product must be the same as the rated voltage.
4.During the installation, please handle the parts carefully.
5.Children are not allowed to operate this product unless sufficient
supervision is provided by adults.
ios

Power Switch
Decreased Brightness
Color Switching
Increased Brightness
Connect the adaptor with the power cord of the LED ring light. Rotate
them reversely to lock them together. Connect the power adaptor to a
power outlet.
Slide out the battery compartment cover and then you can change the
battery.
You can adjust the power button according to your different needs.
180 degree rotation
adjustment
Remote Shutter Instruction
Change Battery for Remote
Shutte
Show Details
Slide the power button upwards to turn on the remote shutter. After that,
use your mobile phone to connect to the remote shutter via BLUE TOOTH.
FRONT BACK

Button A Battery
LED
ON/OFF
Button B
3V
  • Page 1 1

MOUNTDOG MountDog LED Ring Light 14 inch Dimmable Selfie Ring User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI