Lifetime 90023 Owner's manual

Keep this Product ID Number and use when contacting Customer Service:

OWNER’S MANUAL

MODEL N° 90023

OWNER’S MANUAL

COPY

2

Save this owner’s manual for future reference and in the event that

the manufacturer has to be contacted.

**U.S. and Canada customers ONLY**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at

1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**Call us or visit our Web site for Saturday hours**

Lifetime Products, Inc.

**For customers outside the U.S. or Canada, please contact the store for assistance.**

REGISTER YOUR LIFETIME PRODUCT TODAY!

We invite you to read our privacy policy at www.lifetime.com

REGISTER today!

At Lifetime, we are committed to providing innovative and quality products. While registering, you will

have the opportunity to give us your feedback. Your input is valuable to us.

provides the information we need to notify you directly.

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest as-

sured that Lifetime will not sell or provide your personal data to other third parties, or

allow them to use your personal data for their own purposes.

REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM

2102/31/4F 2320501# NOITCURTSNI

COPY

3

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

To ensure safety, do not attempt to assemble this product without reading and

GPMMPXJOHBMMJOTUSVDUJPOTDBSFGVMMZ$IFDLUIFFOUJSFCPYBOEJOTJEFBMMQBDLJOH

materials for parts and/or additional instruction material. Before beginning assembly,

identify and inventory all parts and hardware using the parts and hardware lists and

JEFOUJmFSTJOUIJTEPDVNFOU Proper and complete assembly, use and supervision

BSFFTTFOUJBMGPSQSPQFSPSJFOUBUJPOBOEUPSFEVDFUIFSJTLPGBDDJEFOUPSJOKVSZ"

IJHIQSPCBCJMJUZPGTFSJPVTJOKVSZFYJTUTJGUIJTQSPEVDUJTOPUJOTUBMMFENBJOUBJOFE

and/or operated properly. Failure to comply with any of the warnings in this

JOTUSVDUJPONBOVBMNBZSFTVMUJOTFSJPVTQFSTPOBMJOKVSJFTTVDIBTDVUTCSPLFO

CPOFTOFSWFEBNBHFQBSBMZTJTCSBJOJOKVSZPSEFBUI'BJMVSFUPDPNQMZNBZBMTP

result in property damage. Please heed all warnings and cautions.

'"*-63&50'0--085)&4&8"3/*/(4.":3&46-5*/4&3*064*/+63:031301&35:

DAMAGE AND WILL VOID WARRANTY.

t*GVTJOHBMBEEFSEVSJOHBTTFNCMZVTFFYUSFNFDBVUJPO

t5XPDBQBCMFBEVMUTBSFSFDPNNFOEFEGPSUIJTPQFSBUJPO

t$IFDLCBTFEBJMZGPSMFBLBHF-FBLTNBZDBVTFQSPEVDUUPGBMM

t"TTFNCMFUIFQPMFTFDUJPOTQSPQFSMZ'BJMVSFUPEPTPDPVMEDBVTFUIFQPMF

sections to separate during play or transport.

SAFETY INSTRUCTIONS

BEFORE BEGINNING ASSEMBLY

Keep the hardware bags and their contents separate. If any parts

are missing, call our Customer Service Department.

Identify and inventory all parts and hardware using the parts and

IBSEXBSFMJTUTBOEJEFOUJmFSTJOUIJTEPDVNFOU

5FTUmUBMM#PMUTCZJOTFSUJOHUIFNJOUPUIFJSSFTQFDUJWFIPMFT*G

OFDFTTBSZDBSFGVMMZTDSBQFBXBZBOZFYDFTTQPXEFSDPBUJOH

buildup from inside the holes. Do not scrape away all of the

QPXEFSDPBUJOH#BSFNFUBMNBZSVTU:PVNBZOFFEUPQPVOE

some Bolts into place with a hammer or mallet.



TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY

*Two adults required to

complete assembly*

Only adults should set up the product. Do not allow children

in the setup area until assembly is complete.

Phillips Screwdriver

(1)

'VOOFM

(1)

7/16” Wrench

(2)

Scrap Wood

(1)

Sand

(362 lb)

(1)

Pliers

Rubber Mallet

(1)

1/2” Wrench

(2)

Water Hose

(1)

9/16” Wrench

(2)

w8SFODI

(2)

CCL-3/16” Allen Wrench

(2, included)

5

This area is located at the top,

left-hand corner of the page

and indicates which tools

and hardware are needed to

complete the assembly steps

on a page.

Note:

!

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the

bottom, left-hand corner of a step

and indicates that special attention

is needed to perform a particular

part of a step.

These areas are usually located in

the bottom, right-hand corner of a

step and indicate that damage to

the product or serious injury may

occur if the caution or warning is

not heeded.

WARNING

ASSEMBLY GUIDES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

6

PARTS LIST

HARDWARE LIST

ID Item Description Qty

BCO Pole Assembly Hardware

ADS wYw4DSFX 2

AOF 3/8” Plug 2

ANS 1/2” Nylon Plug 2

CIH %PNFE$PVOUFSTJOL8BTIFS 2

BCQ Pole to Base Assembly Hardware

AAO w/ZMPDL/VU 2

ABD 5/16” Washer 4

AAE wYw)FY#PMU 2

ABN wYw4QBDFS 2

BTS 1/4” Barrel Nut 1

BZO wYw4IPVMEFS#PMU 1

$$- 3/16” Allen Wrench (not shown) 2

BCS Backboard to Rim Assembly Hardware

AAS wYw)FY#PMU 2

ABS wYw(BMWBOJ[FE4QBDFS 2

AAC wYw)FY#PMU 2

ADQ wYw4DSFX 2

AAB w$FOUFSMPDL/VU 2

ABD 5/16” Washer 4

ID Item Description Qty

"-) Top Pole 1

"-' Middle Pole 1

"-& Bottom Pole 1

AJK 3JHIU#BDLCPBSE#SBDLFU 1

AJJ -FGU#BDLCPBSE#SBDLFU 1

AJI #BDLCPBSE 1

"-9 Rim 1

AKZ Net 1

AKC &YUFOTJPO"SN 4

#%- %VOL-BUDI 1

BDM *OOFS(VBSE 1

BDN 0VUFS(VBSE 1

AJM Base 1

"-* Pole Brace 2

AMU Wheel 2

AJC wYw"YMF 1

AJE wYw"YMF 1

AEF Base Plug 2

AMT 8BSOJOH4UJDLFS"QQMJFEUP.JEEMF1PMF 1

7

HARDWARE LIST

ID Item Description Qty

BCS Backboard to Rim Assembly Hardware, Continued

APK 3 1/2” U-Bolt 1

ABK w/ZMPDL'MBOHF/VU 4

"09 Rim Support Channel 1

BCR Backboard to Pole Assembly Hardware

"%( wYw)FY#PMU 4

""9 w$FOUFSMPDL/VU 4

"#- wYw#MBDL4QBDFS 4

ABP wYw$MFBS1PMZ4QBDFS 4

ABA wYw)FY#PMU 1

ABB w$FOUFSMPDL/VU 1

PARTS LIST

v

Parts shown at 10% of Actual Size

ALHY

Top Pole

"-'Y

Middle Pole

ALEY

Bottom Pole

ALIY

Pole Brace

AKCY

&YUFOTJPO"SN

 v

*Warning Sticker applied to side not shown

v

17”

"+$Y

wYw"YMF

15 ”

3/4

7”

"+&Y

wYw"YMF

"++Y

-FGU#BDLCPBSE#SBDLFU

"+,Y

3JHIU#BDLCPBSE#SBDLFU

8

AKZY

Net

ALXY

Rim

"+*Y

#BDLCPBSE

"+.Y

Base

Parts shown at 5% of Actual Size

Parts shown at 10% of Actual Size

PARTS IDENTIFIER

Parts shown at 25% of Actual Size

AMUY

Wheel

BDMY

*OOFS(VBSE

"&'Y

Base

Plug

BDLY

%VOL-BUDI

BDNY

0VUFS(VBSE

9

HARDWARE IDENTIFIER

POLE ASSEMBLY HARDWARE

Hardware shown at Actual Size

BACKBOARD TO RIM ASSEMBLY HARDWARE

Hardware shown at Actual Size

POLE TO BASE ASSEMBLY HARDWARE

Hardware shown at Actual Size

AAEY

wYw)FY#PMU

AAOY

w/ZMPDL/VU

ABDY

5/16” Washer

AASY

wYw)FY#PMU

ADSY

wYw4DSFX

ANSY

1/2” Nylon Plug

"0'Y

3/8” Plug

ABNY

wYw4QBDFS

BTSY

1/4” Barrel Nut

BZOY

wYw4IPVMEFS#PMU

ABSY

wYw(BMWBOJ[FE4QBDFS

ADQY

wYw4DSFX

ABDY

5/16” Washer

AACY

wY)FY#PMU

AABY

w$FOUFSMPDL/VU

ABKY

w/ZMPDL

Flange Nut

CIHY

%PNFE$PVOUFSTJOL

Washer

10

HARDWARE IDENTIFIER

BACKBOARD TO RIM ASSEMBLY HARDWARE (CONTINUED)

Hardware shown at 25% of Actual Size

6.625”

(Not actual length)

BACKBOARD TO POLE ASSEMBLY HARDWARE

Hardware shown at Actual Size

ADGY

wYw)FY#PMU

6 1/2”

(Not actual length)

ABAY

wYw)FY#PMU

AAXY

w$FOUFSMPDL/VU

ABLY

wYw#MBDL4QBDFS

ABPY

wYw$MFBS1PMZ4QBDFS

ABBY

w$FOUFSMPDL/VU

APKY

3 1/2” U-Bolt

AOXY

Rim Support Channel

11

POLE ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

TOOLS REQUIRED

SEC

1

Parts shown at 10% of Actual Size

Phillips Screwdriver

Hardware shown at Actual Size

Scrap Wood

ADSY

wYw4DSFX

ANSY

1/2” Nylon Plug

"0'Y

3/8” Plug

ALHY

Top Pole

"-'Y

Middle Pole

ALEY

Bottom Pole

 v

v

*Warning Sticker applied to side not shown

CIHY

%PNFE$PVOUFSTJOL

Washer

12

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

ALH

"-'

ADS

Align the hole in the Top Pole (ALH) with the slot in the .JEEMF1PMF"-' and

slide the Top Pole over the Middle Pole. Insert a wYw4DSFX"%4

through the small hole in the Top Pole and into the slot in the Middle Pole

as shown.

Note: The 1/4” x 3/4” Screw should be ﬂ ush with the Pole, but

will spin freely once installed. Do not jam the Poles together

until instructed.

!

SEC

1.1

ADSY

ALH

"-'

Warning

Sticker

CIH

CIHY

13

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

Align the hole in the .JEEMF1PMF"-' with the slot in the Bottom Pole (ALE) and

slide the Middle Pole over the Bottom Pole. Insert a wYw4DSFX"%4

through the small hole in the Middle Pole and into the slot in the Bottom

Pole as shown.

SEC

1.2

"-'

ALE

Note: The 1/4” x 3/4” Screw should be ﬂ ush with the Pole, but

will spin freely once installed. Do not jam the Poles together

until instructed.

!

CIH

"-'

ALE

ADSY

ADS

CIHY



TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

Insert the w1MVHT"0' into the small holes on the .JEEMF1PMF"-'.

Then insert the 1/2” Nylon Plugs (ANS) into the large holes on the other

side of the Middle Pole as shown.

SEC

1.3

ANSY

"0'Y

"-'

"0'

ANS

/0500-43&26*3&%'035)*41"(&

Small Holes

Large Holes

15

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

WARNING

The Poles must be seated together! Even if the Poles cover

the slots before seating, they must be struck on a hard

surface ﬁ ve to six times! Failure to seat the Poles correctly

could allow the Poles to separate during use, which could

lead to serious personal injuries or property damage.

Note: Do not hit your feet with the Pole sections,

as serious injury could occur.

!

If the 5PQBOE.JEEMF1PMFT"-)"-' do not completely cover the slots on the

.JEEMFBOE#PUUPN1PMFT"-'"-& after seating, DO NOT COMPLETE ASSEMBLY.

Call our Customer Service Department.

*OPSEFSUPTFBUUIF1PMFTTUSJLFFBDIFOEPGUIF1PMFWFSZIBSEmWFUPTJY

times on a piece of scrap wood or cardboard. This must be done even if

the Poles cover the slots before seating has occurred.

SEC



ATTENTION: THIS STEP CANNOT BE REVERSED!

/0)"3%8"3&3&26*3&%'035)*41"(&

ALH

"-'

ALE

16

"+.Y

Base

ALIY

Pole Brace

"+$Y

wYw"YMF

AMUY

Wheel

15 ”

3/4

7”

"+&Y

wYw"YMF

Parts shown at 10% of Actual Size

Part shown at 25% of Actual Size

POLE TO BASE ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

TOOLS REQUIRED

SEC

2

Part shown at 5% of Actual Size

Hardware shown at Actual Size

ABNY

wYw4QBDFS

AAEY

wYw)FY#PMU

AAOY

w/ZMPDL/VU

BTSY

1/4” Barrel Nut

ABDY

5/16” Washer

1/2" WrenchY

BZOY

wYw4IPVMEFS#PMU

CCL-3/16” Allen Wrench

YJODMVEFE

Bag BCQ

17

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

ALI

AAE

ABD

"+.

ABD

AAO

AAEY

ABDY

ABNY

AAOY

/0500-43&26*3&%'035)*41"(&

Attach the ﬂ attened end of the Pole Brace (ALI) to the #BTF"+. with

the hardware shown. Only ﬁ nger tighten the hardware for now.

Straight End

Curved End

SEC

2.1

Note: Repeat this step to install the other Pole Brace to

the other side of the Base.

!

Slide the wYw"YMF"+$ through the Wheels (AMU) and the holes

at the end of the Bottom Pole (ALE) as shown. Slide the wYw"YMF"+&

through the second set of holes near the end of the Bottom Pole as

shown. Then slide two 1/2” x 1/8” Spacers (ABN)POUPUIFwYw"YMF

and position them against the Wheels.

SEC

2.2

"+$

ABN

AMU

"+$

ALE

"+&

18

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

1MBDFUIF1PMFBTTFNCMZPOUIFHSPVOEXJUIUIF8BSOJOH4UJDLFSPOUIF

.JEEMF1PMF"-' facing down. Position the wYw"YMF"+$ under the

bottom slots of the #BTF"+. as shown, and step onto the Base so the

"YMFTOBQTJOUPUIFTMPUT5IFOSPUBUFUIF1PMFBTTFNCMZVQXBSETPUIBU

the wYw"YMF"+& snaps into the upper slots of the Base as shown.

SEC

2.3

"+$

"+.

BTSY

1/2"Y

"+&

"+.

BZOY

Attach the Pole Braces (ALI) to the Bottom Pole (ALE) with the hardware

shown, and tighten all Pole to Base assembly hardware.

SEC



BTS

BZO

ALE

ALI

Note: Tip the system forward so the Pole rests on the ground. Do not stand

the system up until it is ﬁ lled with either sand or water later in the assembly.

!

ALI

3/16"Y

19

BACKBOARD TO RIM ASSEMBLY

SEC

3

Hardware shown at Actual Size

HARDWARE REQUIRED

AASY

wYw)FY#PMU

ABSY

wYw(BMWBOJ[FE4QBDFS

ABDY

5/16” Washer

ABKY

w/ZMPDL

Flange Nut

AABY

1/4” Center-

MPDL/VU

Hardware shown at 25% of Actual Size

APKY

3 1/2” U-Bolt

AOXY

Rim Support Channel

AACY

wYw)FY#PMU

ADQY

wYw4DSFX

PARTS REQUIRED

"+*Y

#BDLCPBSE

Part shown at 25% of Actual Size

Part shown at 5% of Actual Size

BDMY

*OOFS(VBSE

20

BACKBOARD TO RIM ASSEMBLY

SEC

3

PARTS REQUIRED

1/2” Wrench Y

7/16” WrenchY

TOOLS REQUIRED

ALXY

Rim

Parts shown at 10% of Actual Size

"++Y

-FGU#BDLCPBSE#SBDLFU

"+,Y

3JHIU#BDLCPBSE#SBDLFU

3/8” Wrench

Page is loading ...

Lifetime 90023 Owner's manual

Lifetime 90023 Owner's manual

Related papers

Other documents