JUNG 2302.16REGHM is a 2-gang switch actuator that can be used for switching 230 V AC or 24 V AC/DC electrical loads with floating contacts. It can be mounted on a DIN rail according to EN 60715 in distribution boxes. The device has manual switching of the relays that is independent of the bus, and can operate as NO or NC contacts.
JUNG 2302.16REGHM is a 2-gang switch actuator that can be used for switching 230 V AC or 24 V AC/DC electrical loads with floating contacts. It can be mounted on a DIN rail according to EN 60715 in distribution boxes. The device has manual switching of the relays that is independent of the bus, and can operate as NO or NC contacts.
JUNG 2302.16REGHM is a 2-gang switch actuator that can be used for switching 230 V AC or 24 V AC/DC electrical loads with floating contacts. It can be mounted on a DIN rail according to EN 60715 in distribution boxes. The device has manual switching of the relays that is independent of the bus, and can operate as NO or NC contacts.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI