Cooper Lighting P2L-VM User manual

Type
User manual

This manual is also suitable for

Cooper Lighting P2L-VM luminaire is designed to provide even illumination in low mounting areas such as parking garages or storage facilities. Its powerful light output delivers both horizontal and vertical footcandles, ensuring optimal visibility. The combination die-cast reflector and ballast housing makes the P2L-VM economical, while modular assembly simplifies installation. It boasts a durable white polyester powder coat finish and a hinged refractor for easy relamping without removing the refractor.

Cooper Lighting P2L-VM luminaire is designed to provide even illumination in low mounting areas such as parking garages or storage facilities. Its powerful light output delivers both horizontal and vertical footcandles, ensuring optimal visibility. The combination die-cast reflector and ballast housing makes the P2L-VM economical, while modular assembly simplifies installation. It boasts a durable white polyester powder coat finish and a hinged refractor for easy relamping without removing the refractor.

COOPER LIGHTING - LUMARK
®
INDUSTRIAL
521
COOPER LIGHTING
DIMENSIONS
Standard quick mounting
plate for 3/4" IPS conduit
frees both hands to
complete wiring
Die-cast aluminum
housing has durable white
polyester powder coat
finish
Hinged refractor permits
relamping without
removal of refractor
Acrylic prismatic refractor
controls light for high
vertical and horizontal
footcandles
Removable ballast
compartment cover
provides easy internal
access
Optional “P” mounting
bracket fits a standard
4" J-Box or outlet box
for surface mounting
Approximate net weight:
7 lbs. (8 kgs.)
DESCRIPTION
The Vertimark II delivers
horizontal and vertical
footcandles to evenly illuminate
low mounting areas such
parking garages or storage
facilities areas.
The combination die-cast
reflector/ ballast housing
makes Vertimark II economical.
Modular assembly makes
installation easy and quality
construction ensures years of
consistent performance. U.L.
listed and labeled for damp
location. CSA Certified. Wet
location optional.
BE
VERTIMARK II
100-250W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
LOW-BAY
INDUSTRIAL LUMINAIRE
NOTES: 1 150W is maximum wattage available in HPS. 2 Pulse Start Metal Halide available on 100, 150, 175, 200, and 250W only. 3 250W only. 4 MD available in 208,
240 or 277V or with “E” option which will operate voltages from 200-277V 50/60 Hz. 5 Not recommended for use with Metal Halide lamps due to to rapid
yellowing typical of polycarbonate material. 6 For 120V NPF Reactor ballast, drop “H” after wattage in catalog number. 7 Products also available in non-US
voltages and 50Hz for international markets. Consult factory for availability and ordering information. 8 480V not available with 200 or 250W Pulse Start Metal
Halide. 9 Multi-Tap ballast is 120/208/240/277V wired 277V. 10 Triple-Tap ballast is 120/277/347V wired 347V. 11 Add as suffix in the order shown.
12 Specifications and dimensions subject to change without notice.
ORDERING INFORMATION
SAMPLE NUMBER: HPBE-5A-100H-MT-LL
Lamp Type
HP=High
Pressure
Sodium
1
MH=Metal
Halide
MP=Pulse
Start MH (CWA)
2
MD=Pulse Start Metal Halide (Electronic)
3, 4
Series
BE=Vertimark II
Lens Type
2A=Type II
5A=Type V
2P=Type II
Polycarbonate
5
5P=Type V
Polycarbonate
5
Lamp Wattage
100=100W
150=150W
175=175W
200=200W
250=250W
Power Factor
H=HPF
_ =NPF
6
Voltage
7
120V
208V
4
240V
4
277V
4
347V
480V
8
MT=Multi-Tap
9
TT=Triple-Tap
10
E=Electronic
4
LL=Lamp
Included
Options &
Accessories
11
(See Pages
541-545)
Once in place, the EZ123
readily accepts the
mating half of the hinge
and the fixture is
easily attached.
2 9/16"
[65mm]
5 1/8"
[130mm]
P=Mounting Bracket for
Surface Mounting or
Mounting to 4" J-Box.
17" [432mm]
Surface
12 1/2"
[318mm]
Pendant
13 1/4"
[337mm]
Powered by
technology
MOUNTING
% Lamp Survival
LAMP MORTALITY
2000 4000 6000 10000 8000 12000 14000 16000 18000 20000 22000 24000 26000 28000 30000
0
90
80
70
60
50
40
30
20
10
0
100
Lamp Life [Hours]
Natural White & Uni-Form Pulse Start on ECON TECHNOLOGY Uni-Form Pulse Start on CWA Probe Start Metal Halide on CWA
TM ® ®
% Lumens
LUMEN MAINTENANCE
2000 4000 6000 10000 8000 12000 14000 16000 18000 20000
40
90
80
60
70
50
0
90% Mean Lumens Nat-Wt-ECON 86% Mean Lumens-UPS-ECON 75% Mean Lumens-UPS CWA
65% Mean Lumens-Probe Start
100
Lamp Life [Hours]
LAMP MORTALITY AND LUMEN MAINTENANCE COMPARISONS
NOTE: Lamp Mortality and Lumen Maintenance Charts Courtesy of VENTURE
®
Lamp
Series Wattage
90°C
40°C (100-250W)
40°C (250W ECON)*
Supply
Wire (Min.)
Ambient
Environment
Vertimark II 100-250W
NOTES: * Electronic Pulse Start Metal Halide. (200-277V). 120V 25°C.
  • Page 1 1

Cooper Lighting P2L-VM User manual

Type
User manual
This manual is also suitable for

Cooper Lighting P2L-VM luminaire is designed to provide even illumination in low mounting areas such as parking garages or storage facilities. Its powerful light output delivers both horizontal and vertical footcandles, ensuring optimal visibility. The combination die-cast reflector and ballast housing makes the P2L-VM economical, while modular assembly simplifies installation. It boasts a durable white polyester powder coat finish and a hinged refractor for easy relamping without removing the refractor.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI