MULTIPLEX DI Wide Splash Guard Installation guide

MULTIPLEX
Brand
MULTIPLEX
Model
DI Wide Splash Guard
Type
Installation guide

This manual is also suitable for

Pg. 1of 1
Trimmed Extended Splash Guard Install Instructions
Part No. 5031739
Revision No. 0
Instructions
1) Shut off or disconnect power supply to
unit. Failure to do so can cause
electrical shock or injury.
2) Remove screws (1A) from splash panel
(1B) and keep for reuse. Remove drain
pan grid (1C) and keep for reuse unless
installing a different drain pan grid
option (See Figure 1).
3) Install left and right splash guards (2A
and 3A) by placing bottom flange (2B)
of splash guard inside drain pan as
shown. Align slot in splash guard with
mounting screw hole (2C) of splash
panel and reinstall screws (See Figure
2 and 3).
4) Reinstall previously removed drain pan
grid (3B) or different drain pan grid
option (See Figure 3).
5) Turn on or reconnect power supply to
unit. Dispense drinks from unit to
ensure proper operation before placing
unit back into general service.
Parts Included in Assembly No.: 5031692
Qty. Description Part Number
1 …….. Left Splash Guard with Trim……5031690
1 …….. Right Splash Guard with Trim….5031691
1 ………Splash Guard Install Instr. ……..5031739
1A
Figure 1
Figure 2
Figure 3
1B
1C
2A
2B
2C
3B
3A
3A
  • Page 1 1

MULTIPLEX DI Wide Splash Guard Installation guide

MULTIPLEX
Brand
MULTIPLEX
Model
DI Wide Splash Guard
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents