Whirlpool AZA-HP 8040 User guide

Brand: Whirlpool

Model: AZA-HP 8040

Type: User guide

Whirlpool AZA-HP 8040 is a tumble dryer with a range of features to make drying your clothes easier. Features include selecting the correct drying programme for your fabrics, selecting options like dryness adjustment, and the anti-crease function or delayed start. There's also a handy 'failure code' guide to help you troubleshoot any issues that may arise. You'll find it easy to keep your dryer in good working order, with clear instructions on cleaning the lint filter, emptying the water container and cleaning the bottom filter.

1

MACHINE OPERATION

Additional information (including troubleshooting and service) can be found in the individual chapters of

the Instructions for use.

Sort laundry according to

care symbols

Do not tumble dry

Suitable for tumble drying –

at low temperatures

Suitable for tumble drying

Sort laundry by:

Material thickness: whenever there is greater load than the dryer can handle,

separate laundry according to weight (e.g. dry towels and thin underwear separately).

Type of material: cotton (linen); synthetic textiles (easy care).

Degree of drying: cupboard dry, iron dry etc.

Do not tumble dry: nylon stockings, delicate embroidery, fabrics with metallic

decorations, bulky items such as sleeping bags or pillows.

Preparing laundry

Check that all fastenings are closed and that pockets are empty.

Please ensure that there are no cigarette lighters in the laundry.

Turn laundry inside out.

Loading dryer

Place laundry loosely in the drum to achieve equal drying throughout.

Then close the door.

Selecting programme

Select the drying programme required by turning the programme selector knob (for

information, refer to programme table).

Selecting options

(if available)

Select the option required by pressing the corresponding button.

The indicator lamp above the relevant button lights up to confirm your selection.

A fast blinking lamp indicates a wrong selection is made (incompatible options).

Press the button again to cancel the option.

Starting dryer

The drying programme is started by pressing the “Start (Pause)” button.

The relevant indicator lamp lights up.

Changing programme selection: If the programme selected is changed during

drying, the dryer stops. The “Start (Pause)” indicator lamp flashes.

To operate the new programme, press the “Start (Pause)” button again.

Interrupting programme: To interrupt a drying cycle, press the “Start (Pause)”

button and open the door. Wait at least 5 minutes, to allow the laundry to cool down,

before you unload the dryer. For your safety the drying cycle stops automatically if

you open the door.To restart, after door opening, close the door and press the “Start

(Pause)” button again.

Warning: Never stop a tumble dryer before the end of the drying cycle, unless all

items are quickly removed and spread out so that the heat is dissipated.

Programme end –

unloading dryer

The final part of a drying cycle occurs without heat (cool down cycle) to ensure that

the items reach a lower temperature to avoid wrinkling.

Anticrease: If the laundry is not removed at the end of the drying cycle, an automatic

anti-crease cycle will operate for maximum 15 min (by choosing the option

“Anticrease” this time can be extended up to 12 hours).

The drum rotates to prevent the laundry from creasing.

End: Take the laundry out of the dryer.

The drying process is complete and the anti-crease phase has been reached (active).

Switching dryer off

Set the programme selector knob to “Off” (“O”).

Cleaning the lint filter after every cycle: open door, pull lint filter up and out of machine and open it. Brush lint using a soft

brush or your fingertips. Close door filter and push firmly back into place.

Emptying water container: pull container out by the handle and empty. Replace the container when empty by pushing it

completely back into place.

Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover

thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which

have been provided with the garment or article.

Progr

Cotton

Synthetic

Special programmes

Airing

Drying

items

*Test

mmes / Drying levels

Laundry is aired, refresh

30 minutes without heati

items

Completes drying (suita

rogrammes according t

Ove

Extra dry

Multi

towe

Cupboard dry + Terr

Cupboard dry*

Simil

ironi

und

sock

Iron dry*

Lau

and

work

Extra dry

Lau

as:

blan

Cupboard dry*

Lau

as: s

Iron dry

Lau

trou

Delicate plus

Low

such

Mixed load

T-sh

spor

Wool finish

For

such

for d

Down Slee

Sport

Spo

tight

d and loosen up for

All t

le for all fabrics)

EN61121, tested with

rview of progra

-layered, thick laundry such

ls, terry towelling bath robes.

towels, dry towels, bed line

ar types of laundry which do

g such as: dry towels, bed li

rwear, baby clothes, T-shirts

dry which requires ironing s

able linen, dry towels, T-shir

clothes.

dry with thick, multi-layered

ed and table linen, track suit

ets.

dry which does not require i

hirts, blouses, T-shirts, sport

dry which requires ironing s

ers, dresses, skirts, shirts, bl

drying intensity for delicates

as: trousers, dresses, shirts

rts, blouses, towels, underw

swear.

erating and loosening wooll

as hats, sweaters, scarves,

ying woollen textiles.

ing bags, trousers, vests.

t clothes, functional underwe

xtiles.

aximum rated load cap

mes

Type of textile

s: terry

, underwea

not require

nen,

, cotton

ch as: bed

s, polo shirts,

reas such

, anoraks,

Synthet

oning such

ware.

ch as:

ouses.

nd items

blouses.

Laundry

pol

ar,

n textiles

loves. Not

ar, running

city.

2

Fabrics

Cotton or linen hot wash /

coloured laundry

Max. 8.0 kg

ic, mixed fibre or cotton easy

oning not required) laundry

Max. 4.0 kg

made from synthetic fibres s

amide, nylon, polyacrylic, et

2.5 kg

Cotton – synthetic blend

4.0 kg

Textiles made of wool

1.0 kg

undry that contains downs

3.0 kg

Synthetic

2.5 kg

10’ – 180’

Gentle

Additi

rever

X X

care

X X

ch as

X X

– X

X X

– –

– X

Opti

nal

Anti-crease

Dryness

adjust-

ment

X X

X –

X X

–

X –

Pause

Avvio

(Pausa)

Key

lock

Ann

X X

Appr

dryin

(in m

ulla

Finish in

Very

wet

load

X 205

X 190

X 175

X 155

X 95

X 75

X 60

X 80

X 140

X 6

X 120

X 80

– –

X 10’

–

ximate

times

nutes)

Wet

load

140

125

110

100

120

–

180’

3

HOW TO PROCEED IF…

...you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the

following points before calling the customer service – also refer to relevant chapter in the Instructions for use)

Drying takes too long /

Laundry is not dry

enough

 Has the correct drying programme been selected?

 Has the cycle been interrupted (door opening, full water container)?

 Was the inserted laundry too wet (washing machine spin speed less

than 1000 rpm)?

 Is the lint filter dirty (filter indicator light on)?

 Is the heat exchanger dirty (for more information, refer to the

Instructions for use)?

 Is the room temperature too high?

 Is the “End” and “Anticrease” indicator lamp lighting up?

The drying cycle is complete and the laundry can be taken out.

 If the drying result does not meet your expectation, select a more dry

programme or use the dryness adjustment option (if available) to

optimize the drying result.

The dryer does not

operate (after a power

failure, always press

the “Start (Pause)”

button)

 Is the plug properly inserted into the mains electricity socket?

 Is there a power failure?

 Has the fuse blown?

 Is the door properly closed?

 Has a drying programme been selected?

 Has the “Start (Pause)” button been pressed?

 Has the start delay option been selected?

 Is the dryer overloaded?  Please remove a part of the load.

Filter, water container

indicator lamp on

 Is the lint filter clean?

 Is the water container empty?

 Has the water container been inserted correctly?

 Is the heat exchanger clean and inserted correctly?

Water droplets

underneath the dryer

 Has the heat exchanger been inserted correctly?

 Have all lint on the heat exchanger seal and the door seal been

wiped away?

 Has the water container been inserted correctly?

 If the direct drain connection is used, is it tight?

 Is the dryer leveled?

...you want to care of and clean your dryer:

Clean the filter at the

end of every cycle

 Brush lint using a soft brush or your fingertips.

 Close the filter.

 Push the filter back into place.

Empty the water

container at the end of

every drying cycle

 Pull the handle to remove the water container.

 Empty the water container.

 Replace the water container when empty by pushing it completely

back into place.

Clean the bottom filter

every fifth cycle

 Clean the bottom filter under running water.

 Remove all fluffs from the seals.

 Clean the heat exchanger housing (for further information see

chapter “Cleaning the heat exchanger” in the Instructions for use).



See the Instruction for use for further information how to clean the

bottom filter.

4

FAILURE CODES

In case of a malfunction of the dryer, one the following failure codes could be displayed.

Depending on the model of your dryer, the failure can be displayed in letters or by different blinking lamps.

Failure

code

Lamps failure code

Check needed by customer before

Service call

F01

Please call the After-Sales-Service.

F02

Please call the After-Sales-Service.

F03

Please call the After-Sales-Service.

F04

Please call the After-Sales-Service.

F05

Turn OFF the dryer. Unplug the dryer.

Assure that the ambient temperature is

between 5°C and 35°C. Wait for 1 hour.

Plug the dryer again and restart the dryer.

If the failure occurs again, please call the

After-Sales-Service.

F06

F07

F10 – F24

Turn OFF the dryer. Unplug the dryer. Wait

for 30 minutes. Plug the dryer again and

restart the dryer. If the failure occurs again,

please call the After-Sales-Service.

5

Before using the machine, please also read the instructions for use carefully!

AZA-HP 8040 – Quick Reference Guide

Indicator lamps and Options

Programme selector knob

The drying programme is selected by turning

this knob.

The “Start (Pause)” indicator lamp flashes.

“Start (Pause)” button

The drying programme is started by pressing

this button.

The indicator lamp lights up.

Door Filter

The indicator lamp lights up when the door

filter needs to be cleaned.

Clean the door filter at the end of every

drying cycle.

Bottom Filter

This indicator lamp lights up when the bottom

filter needs to be cleaned.

This indicator lamp is blinking, when the

bottom filter is not correctly positioned.

Please take care that the bottom filter is

correctly inserted and the handle is fully

engaged.

Water container

The indicator lamp lights up when the water

container needs to be emptied.

The drying cycle is automatically interrupted.

Empty the container and restart the drying

programme.

Empty the water container after every

drying cycle

“Remaining time” display

Depending on the programme selected a

default drying time is displayed.

fter start of cycle the time displayed is

corrected depending on the volume, type and

moisture of the laundry.

The drying time specified is a calculated

value which will be updated during the

drying cycle.

The flashing lines indicate that the calculation

is running.

The remaining time will be updated.

Eco Monito

The “Eco monitor” gives you a rough

feedback about the energy consumption of

the humidity steared programmes.

s soon as you turn the programme selector

to any humidity steared programme, the

“Eco monitor” lamps will indicate the

expected energy consumption.

The three indicators show the degree of

consumption: the less energy your

programme setting is forecasted to consume,

the less indicators will light up.

This depends on the programme, initial

moisture and options selected, and also on

the size of the load.

For that reason, the forecasted degree of

energy consumption may adapt when the

tumble dryer detects the load size.

End

The drying programme is finished.

Please unload the dryer

Overdry protection

The indicator lights up when a humidity

controlled programme is selected, to indicate

the activated protection function.

Dryness

By selectin

dryness le

fter the s

you can ch

the button.

Pressing 1

Pressing 2

Pressing 3

level

Reset

During the

programm

off all setti

During run

the button

dryer back

The button

3 seconds.

Key lock

For child p

be used to

interface.

To activate

be pressed

symbol at t

To deactiv

until the “k

The key lo

the selecto

or the door

The functio

Dry time

Turn the pr

“Drying Ti

Press the

duration of

90 minutes

Gentle

Selecting t

temperatur

This option

option “Ra

Anticrea

This option

wrinkling,

directly aft

The drum t

maximum

It can be in

off the dry

This option

function, if

evel

this option yo

el of the laund

lection of the d

ose the dryne

time you selec

times you sele

selection phas

, pressing this

gs of selected

ing drying cycl

ill stop the cy

in selection mo

needs to be pr

otection reaso

lock all functio

this option, the

for 3 seconds,

e display app

te this option,

y” symbol dis

k function is sti

knob is turne

is opened.

n has to be de

djustment

ogramme sele

e” position.

utton “Drying

cycle in ten mi

is option will r

cannot be sele

id” is selecte

can be chosen

hen the laundr

r end of the cy

rns from time

2 hours.

errupted at an

deactivates th

t is activated.

can adjust th

sired program

s level by pres

a more dry lev

t a less dry lev

t again normal

of the

utton will swit

ptions.

the pressing

le and set the

ssed for

s, this option c

s of the user

button needs t

until the “key”

ars.

ress the butto

ppears.

ll active even

to “off” positi

ctivated.

tor knob to

ime” to select

utes steps up

duce the dryin

cted when the

to reduce

is not unload

le.

o time for

time by switc

“Buzzer”

6

sing

dry

hen

the

ing



tur

ish in

h this function

gramme to co

button to sele

gramme shall

Thus, it allows

ready at a par

from more fav

the night, for e

The “Finish i

in full hour tim

When you pre

possible time

pressing the b

available time

To remove it a

programme se

position.

When you hav

“Finish in” ti

countdown wil

During the co

modify the opt

deselect optio

Sometimes th

before the sel

expired (e.g. f

In this case, th

laundry regula

selected “Fini

During tumblin

animation.

The tumbling

any time eithe

rotating the pr

opening the d

ditional rev

h this option th

ing cycle more

ing direction t

s will improve t

ing.

you can postpo

plete at a late

t in how many

e finished.

you to have y

icular time and

urable energy

xample.

” function can

segments (1

s the button, t

ill be displaye

utton to loop th

gain, set the in

lector knob to t

e selected the

e, press “Star

l begin.

ntdown, you c

ion setting (sel

s).

programme

cted “Finish i

r small loads).

e dryer will tu

rly to keep it fr

h in” time ha

g, the display

hase can be s

by pressing a

gramme selec

or.

rse

e drum will tur

often against t

an in a normal

he evenness o

5019 30

ubject to technical

ne your

time: press

hours the

ur laundry

to profit

rates during

be selected

o 24 h).

e shortest

; keep on

ough all the

ex of the

e “Off”

esired

” – the

n still

ct or

ay finish

” time has

ble the

sh, until the

expired.

ill show an

opped at

y button, by

or or by

during the

e main

cycle.

laundry

01577

modifications)

Whirlpool AZA-HP 8040 User guide

Whirlpool AZA-HP 8040 User guide

Whirlpool AZA-HP 8040 User guide

Related papers

Other documents