Whirlpool AZA-HP 9050 Program Chart

Type
Program Chart

Whirlpool AZA-HP 9050 is a versatile drying machine suitable for a variety of fabrics, including cotton, synthetics, and wool. It features multiple drying programs, such as extra dry, cupboard dry, and iron dry, allowing you to customize the drying level based on your needs. The machine also includes options like anti-crease and dryness adjustment, helping to prevent wrinkles and achieve the desired dryness level. With its user-friendly controls and efficient drying performance, the Whirlpool AZA-HP 9050 is designed to make laundry care convenient and effective.

Whirlpool AZA-HP 9050 is a versatile drying machine suitable for a variety of fabrics, including cotton, synthetics, and wool. It features multiple drying programs, such as extra dry, cupboard dry, and iron dry, allowing you to customize the drying level based on your needs. The machine also includes options like anti-crease and dryness adjustment, helping to prevent wrinkles and achieve the desired dryness level. With its user-friendly controls and efficient drying performance, the Whirlpool AZA-HP 9050 is designed to make laundry care convenient and effective.

1
MACHINE OPERATION
Additional information (including troubleshooting and service) can be found in the individual chapters of
the Instructions for use.
Sort laundry according to
care symbols
Do not tumble dry
Suitable for tumble drying –
at low temperatures
Suitable for tumble drying
Sort laundry by:
Material thickness: whenever there is greater load than the dryer can handle,
separate laundry according to weight (e.g. dry towels and thin underwear separately).
Type of material: cotton (linen); synthetic textiles (easy care).
Degree of drying: cupboard dry, iron dry etc.
Do not tumble dry: nylon stockings, delicate embroidery, fabrics with metallic
decorations, bulky items such as sleeping bags or pillows.
Preparing laundry
Check that all fastenings are closed and that pockets are empty.
Please ensure that there are no cigarette lighters in the laundry.
Turn laundry inside out.
Loading dryer
Place laundry loosely in the drum to achieve equal drying throughout.
Then close the door.
Selecting programme
Select the drying programme required by turning the programme selector knob (for
information, refer to programme table).
Selecting options
(if available)
Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection.
A fast blinking lamp indicates a wrong selection is made (incompatible options).
Press the button again to cancel the option.
Starting dryer
The drying programme is started by pressing the “Start (Pause)” button.
The relevant indicator lamp lights up.
Changing programme selection: If the programme selected is changed during
drying, the dryer stops. The “Start (Pause)” indicator lamp flashes.
To operate the new programme, press the “Start (Pause)” button again.
Interrupting programme: To interrupt a drying cycle, press the “Start (Pause)”
button and open the door. Wait at least 5 minutes, to allow the laundry to cool down,
before you unload the dryer. For your safety the drying cycle stops automatically if
you open the door.To restart, after door opening, close the door and press the “Start
(Pause)” button again.
Warning: Never stop a tumble dryer before the end of the drying cycle, unless all
items are quickly removed and spread out so that the heat is dissipated.
Programme end –
unloading dryer
The final part of a drying cycle occurs without heat (cool down cycle) to ensure that
the items reach a lower temperature to avoid wrinkling.
Anticrease: If the laundry is not removed at the end of the drying cycle, an automatic
anti-crease cycle will operate for maximum 15 min (by choosing the option
“Anticrease” this time can be extended up to 12 hours).
The drum rotates to prevent the laundry from creasing.
End: Take the laundry out of the dryer.
The drying process is complete and the anti-crease phase has been reached (active).
Switching dryer off
Set the programme selector knob to “Off” (“O”).
Cleaning the lint filter after every cycle: open door, pull lint filter up and out of machine and open it. Brush lint using a soft
brush or your fingertips. Close door filter and push firmly back into place.
Emptying water container: pull container out by the handle and empty. Replace the container when empty by pushing it
completely back into place.
Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which
have been provided with the garment or article.
Progr
a
Cotton
W
Synthetic
V
W
Special programmes
V
Airing
Drying
items
*Test
a
mmes / Drying levels
W
V
W
V
Laundry is aired, refres
h
for 30 minutes without h
items
Completes drying (suita
programmes according
Ov
e
Extra dry
Mult
i
terry
Cupboard dry + Terr
y
Cupboard dry*
Simi
suc
h
clot
h
Iron dry*
Lau
n
tabl
e
clot
h
Extra dry
Lau
n
and
t
Cupboard dry*
Lau
n
shirt
s
Iron dry
Lau
n
dres
s
Delicate plus
Low
trou
s
Mixed load T-sh
Wool finish
For
a
hats
,
wool
Down Slee
Sport Spo
r
h
ed and loosen up
eating.
All t
e
ble for all fabrics)
o EN61121, tested with
rview of progra
i
-layered, thick laundry such
a
towelling bath robes.
towels, dry towels, bed line
lar types of laundry which do
as: dry towels, bed linen, u
h
es, T-shirts, cotton socks.
dry which requires ironing s
e
linen, dry towels, T-shirts, p
o
h
es.
n
dry with thick, multi-layered
a
able linen, track suits, anora
dry which does not require i
s
, blouses, T-shirts, sportsw
a
dry which requires ironing s
s
es, skirts, shirts, blouses.
drying intensity for delicates
ers, dresses, shirts, blouses
irts, blouses, towels, underw
e
erating and loosening wooll
sweaters, scarves, gloves.
len textiles.
ping bags, trousers, vests.
t clothes, functional underw
e
xtiles.
aximum rated load cap
mmes
Type of textile
a
s: terry towels,
n
, underwea
r
not require ironing
n
derwear, baby
u
ch as: bed and
o
lo shirts, work
a
reas such as: bed
ks, blankets.
Syn
r
oning such as:
a
re.
u
ch as: trousers,
and items such as:
.
Laun
e
ar, sportswear.
e
n textiles such as
N
ot for drying
e
ar, running tights.
a
city.
2
Fabrics
Cotton or linen hot wash
coloured laundry
Max. 9.0 kg
thetic, mixed fibre or cotton
(ironing not required) laun
d
Max. 4.5 kg
dry made from synthetic fibr
polyamide, nylon, polyacryli
c
2.5 kg
Cotton – synthetic blen
d
4.5 kg
Textiles made of wool
1.0 kg
Laundry that contains do
w
3.0 kg
Synthetic
2.5 kg
10’ – 180’
Gentle
Addi
t
rev
e
/
X
X
X
X
X
X
X
X
e
asy care
d
ry
X
X
X
X
X
X
e
s such as
c
, etc.
X
X
d
X
X
X
w
ns
X
X
X
X
Opti
t
ional
e
rse
Anticrease
Dryness
adjustment
Livello di
asciugatura
X
X X
X
X X
X
X X
X
X X
X
X X
X
X X
X
X X
X
X X
X
X X
X
X
X
X
X
X X
– –
X
X
ons
Pause
Pausa
Key
lock
Re
s
Ann
u
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
X X X
Approxi
m
drying t
i
(in min
u
et
u
lla
Finish
in
Fine ciclo
ritardato
Very
wet
load
X 220
X 200
X 185
X 165
X 105
X 80
X 70
X 80
X 150
X 6
X 120
X 80
– –
X 10’
1
m
ate
i
mes
u
tes)
Wet
load
130
115
100
85
70
60
50
60
90
6
120
60
1
80’
3
HOW TO PROCEED IF…
...you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the
following points before calling the customer service – also refer to relevant chapter in the Instructions for use)
Drying takes too long /
Laundry is not dry
enough
Has the correct drying programme been selected?
Has the cycle been interrupted (door opening, full water container)?
Was the inserted laundry too wet (washing machine spin speed less
than 1000 rpm)?
Is the lint filter dirty (filter indicator light on)?
Is the heat exchanger dirty (for more information, refer to the
Instructions for use)?
Is the room temperature too high?
Is the “End” and “Anticrease” indicator lamp lighting up?
The drying cycle is complete and the laundry can be taken out.
If the drying result does not meet your expectation, select a more dry
programme or use the dryness adjustment option (if available) to
optimize the drying result.
The dryer does not
operate (after a power
failure, always press
the “Start (Pause)”
button)
Is the plug properly inserted into the mains electricity socket?
Is there a power failure?
Has the fuse blown?
Is the door properly closed?
Has a drying programme been selected?
Has the “Start (Pause)” button been pressed?
Has the start delay option been selected?
Is the dryer overloaded? Please remove a part of the load.
Filter, water container
indicator lamp on
Is the lint filter clean?
Is the water container empty?
Has the water container been inserted correctly?
Is the heat exchanger clean and inserted correctly?
Water droplets
underneath the dryer
Has the heat exchanger been inserted correctly?
Have all lint on the heat exchanger seal and the door seal been
wiped away?
Has the water container been inserted correctly?
If the direct drain connection is used, is it tight?
Is the dryer leveled?
...you want to care of and clean your dryer:
Clean the filter at the
end of every cycle
Brush lint using a soft brush or your fingertips.
Close the filter.
Push the filter back into place.
Empty the water
container at the end of
every drying cycle
Pull the handle to remove the water container.
Empty the water container.
Replace the water container when empty by pushing it completely
back into place.
Clean the bottom filter
every fifth cycle
Clean the bottom filter under running water.
Remove all fluffs from the seals.
Clean the heat exchanger housing (for further information see
chapter “Cleaning the heat exchanger” in the Instructions for use).
See the Instruction for use for further information how to clean the
bottom filter.
4
FAILURE CODES
In case of a malfunction of the dryer, one the following failure codes could be displayed.
Depending on the model of your dryer, the failure can be displayed in letters or by different blinking lamps.
Failure
code
Lamps failure code
Check needed by customer before
Service call
F01
Please call the After-Sales-Service.
F02
Please call the After-Sales-Service.
F03
Please call the After-Sales-Service.
F04
Please call the After-Sales-Service.
F05
Turn OFF the dryer. Unplug the dryer.
Assure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour.
Plug the dryer again and restart the dryer.
If the failure occurs again, please call the
After-Sales-Service.
F06
F07
F10 – F24
Turn OFF the dryer. Unplug the dryer. Wait
for 30 minutes. Plug the dryer again and
restart the dryer. If the failure occurs again,
please call the After-Sales-Service.
B
e
AZ
A
Progra
m
The drying
this knob.
The “Start
“Start (
P
The drying
this button.
The indicat
Door Fil
t
The indicat
filter needs
Clean the
d
drying cy
c
Bottom
F
This indica
t
filter needs
This indica
t
bottom filte
Please tak
e
correctly in
s
engaged.
Water c
o
The indicat
container n
The drying
Empty the
c
programm
e
Empty the
drying cy
c
e
fore using th
e
A
-HP
9
I
n
m
me selecto
programme is
s
(Pause)” indic
a
P
ause)” but
t
programme is
s
or lamp lights u
t
e
r
or lamp lights u
to be cleaned.
d
oor filter at t
h
c
le.
F
ilte
r
t
or lamp lights
u
to be cleaned.
t
or lamp is blin
k
r is not correctl
y
e
care that the
b
s
erted and the
h
o
ntaine
r
or lamp lights u
eeds to be em
p
cycle is autom
a
c
ontainer and r
e
e
.
water contain
e
c
le
e
machine, ple
a
9
050 –
Q
n
dicator
l
r knob
s
elected by turn
a
tor lamp flash
e
on
s
tarted by pres
s
p.
p when the do
o
h
e end of ever
y
u
p when the bot
k
ing, when the
y
positioned.
b
ottom filter is
h
andle is fully
p when the wa
t
p
tied.
a
tically interrupt
e
e
start the dryin
g
e
r after every
5
a
se also read t
Q
uick
lamps a
n
n
ing
e
s.
s
ing
o
r
y
t
tom
t
er
ed.
g
h
e instruction
s
Refer
e
n
d Opti
o
R
D
e
de
f
A
ft
co
r
m
o
Th
va
l
dr
y
Th
e
is
r
Th
e
E
c
Th
e
fe
e
th
e
Th
pr
o
A
s
to
a
“E
c
ex
p
Th
e
co
n
pr
o
th
e
Th
m
o
th
e
Fo
en
e
tu
m
E
n
Th
e
Pl
e
s
for use caref
u
e
nce G
u
o
ns
R
emaining ti
m
pending on the
f
ault drying tim
e
e
r start of cycle
r
rected dependi
o
isture of the la
u
e
drying time
s
l
ue which will
b
y
ing cycle.
e
flashing lines
r
unning.
e
remaining tim
c
o Monito
r
e
“Eco monito
e
dback about th
e
e
selected prog
r
i
s function will
n
o
gramme.
soon as you tu
a
ny humidity st
e
c
o monitor” la
m
p
ected energy
c
e
three indicato
n
sumption: the
l
o
gramme settin
g
e
less indicators
i
s depends on t
o
isture and opti
o
e
size of the loa
d
r
that reason, t
h
e
rgy consumpti
o
m
ble dryer dete
c
n
d
e
drying progra
m
e
ase unload the
ully!
u
ide
m
e” display
programme se
e
is displayed.
e
the time displ
a
i
ng on the volu
m
u
ndry.
s
pecified is a
c
b
e updated du
indicate that th
e
m
e will be updat
e
r” gives you a
r
e energy cons
u
r
amme.
n
ot work for a ti
m
rn the program
m
e
ared program
m
mps will indicat
c
onsumption.
o
rs show the de
g
less energy yo
u
g
is forecasted
t
s
will light up.
t
he programme
,
o
ns selected, a
n
d
.
h
e forecasted d
e
on may adapt
w
c
ts the load siz
e
mme is finishe
d
e
drye
r
.
lected a
a
yed is
m
e, type and
c
alculated
ring the
e
calculation
e
d.
r
ough
u
mption of
m
e based
m
e selector
m
e, the
e
the
g
ree of
u
r
t
o consume,
initial
n
d also on
e
gree of
w
hen the
e
.
d
.
Overdry
p
The indicat
controlled
p
the activat
e
Dryness
l
By selectin
g
dryness le
v
A
fter the s
e
you can ch
o
the button.
Pressing 1
or
Pressing 2
or
Pressing 3
level
.
Reset
During the
programm
e
off all setti
n
During run
n
the button
w
dryer back
The button
3 seconds.
Key lock
For child p
r
be used to
interface.
To activate
be pressed
symbol at t
h
To deactiv
a
until the “k
e
The key lo
c
the selecto
r
or the door
The functio
Dry time
a
Turn the pr
“Drying Ti
m
Press the
b
duration of
180 minute
Gentle
Selecting t
h
temperatur
e
This option
option “Ra
p
p
rotection
or lights up wh
e
p
rogramme is s
e
e
d protection fu
n
l
evel
g
this option yo
u
v
el of the laund
r
e
lection of the d
o
ose the dryne
s
time you selec
t
times you sele
c
times you sele
c
selection phas
e
e
, pressing this
b
n
gs of selected
o
n
ing drying cycl
e
w
ill stop the cy
c
in selection mo
needs to be pr
e
r
otection reaso
n
lock all functio
n
this option, the
for 3 seconds,
h
e display app
e
a
te this option,
p
e
y” symbol dis
a
c
k function is sti
r
knob is turne
d
is opened.
n has to be de
a
a
djustment
ogramme sele
c
m
e” position.
b
utton “Drying
t
cycle in ten mi
n
s.
h
is option will r
e
e
.
cannot be sele
p
id” is selecte
d
e
n a humidity
e
lected, to indi
c
n
ction.
u
can adjust th
e
r
y.
e
sired program
s
s level by pres
s
t
a more dry lev
e
c
t a less dry lev
e
c
t again normal
e
of the
b
utton will swit
c
o
ptions.
e
the pressing
o
c
le and set the
d
e.
e
ssed for
n
s, this option c
a
n
s of the user
button needs t
o
until the “key”
e
ars.
p
ress the butto
n
a
ppears.
ll active even
w
to “off” positi
o
a
ctivated.
c
tor knob to
t
ime” to select
t
n
utes steps up
t
e
duce the dryin
g
cted when the
d
.
6
c
ate
e
me
sing
e
l
e
l
dry
c
h
o
f
a
n
o
n
w
hen
o
n
the
t
o
g
An
Th
wri
dir
e
Th
e
m
a
It
c
off
Th
fu
n
Fi
n
Wi
t
pr
o
th
e
pr
o
Ad
Wi
t
dr
y
tur
Th
dr
y
n
ticrease
i
s option can b
e
nkling, when th
e
e
ctly after end
o
e
drum turns fr
o
a
ximum 12 hou
r
c
an be interrupt
e
the dryer.
i
s option deacti
v
n
ction, if it is act
n
ish in
t
h this function
y
o
gramme to co
m
e
button to sele
c
o
gramme shall
b
Thus, it allows
ready at a par
t
from more fav
o
the night, for e
x
The “Finish i
n
in full hour tim
e
When you pre
s
possible time
w
pressing the b
u
available time
s
To remove it a
programme se
position.
When you hav
“Finish in” ti
m
countdown wil
l
During the co
u
modify the opt
i
deselect optio
n
Sometimes th
e
before the sel
e
expired (e.g. f
o
In this case, th
laundry regula
r
selected “Fini
s
During tumblin
animation.
The tumbling
p
any time eithe
r
rotating the pr
o
opening the d
o
d
ditional rev
e
t
h this option th
e
y
ing cycle more
n
ing direction t
h
i
s will improve t
y
ing.
(
e
chosen to red
u
e laundry is no
t
o
f the cycle.
o
m time to time
r
s.
e
d at any time
b
v
ates the “Buz
z
t
ivated.
you can postpo
m
plete at a late
r
c
t in how many
b
e finished.
you to have y
o
t
icular time and
o
urable energy
e
xample.
n
function can
e
segments (1
t
s
s the button, t
h
w
ill be displaye
d
utton to loop th
r
s
.
a
gain, set the in
d
e
lector knob to t
v
e selected the
d
m
e, press “Star
t
l begin.
u
ntdown, you c
a
ion setting (sel
e
n
s).
e
programme
m
e
cted “Finish i
n
o
r small loads).
h
e dryer will tu
m
rly to keep it fr
e
s
h in” time ha
s
n
g, the display
w
p
hase can be s
t
r
by pressing a
n
o
gramme selec
t
o
or.
e
rse
e drum will tur
n
often against t
h
h
an in a normal
t
he evenness o
f
5019 3
0
(
Subject to technic
a
u
ce
t
unloaded
for
b
y switching
z
er”
ne your
r
time: press
hours the
o
ur laundry
to profit
rates during
be selected
t
o 24 h).
h
e shortest
d
; keep on
r
ough all the
d
ex of the
h
e “Off
d
esired
t
– the
a
n still
e
ct or
m
ay finish
n
time has
m
ble the
e
sh, until the
s
expired.
w
ill show an
t
opped at
n
y button, by
t
or or by
during the
h
e main
cycle.
f
laundry
0
7 01576
a
l modifications)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Whirlpool AZA-HP 9050 Program Chart

Type
Program Chart

Whirlpool AZA-HP 9050 is a versatile drying machine suitable for a variety of fabrics, including cotton, synthetics, and wool. It features multiple drying programs, such as extra dry, cupboard dry, and iron dry, allowing you to customize the drying level based on your needs. The machine also includes options like anti-crease and dryness adjustment, helping to prevent wrinkles and achieve the desired dryness level. With its user-friendly controls and efficient drying performance, the Whirlpool AZA-HP 9050 is designed to make laundry care convenient and effective.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI