Akura APUSB713A User manual

Category
CD players
Type
User manual

Akura APUSB713A is a portable player that combines various audio playback capabilities. It features a built-in CD/Digital Audio player, allowing you to enjoy your favorite music from physical discs. Additionally, it has a USB slot, enabling you to connect a USB storage device and play audio files directly from it.

Furthermore, this device has an integrated FM/FM-STEREO radio tuner, providing access to a wide range of radio stations for your listening pleasure.

Akura APUSB713A is a portable player that combines various audio playback capabilities. It features a built-in CD/Digital Audio player, allowing you to enjoy your favorite music from physical discs. Additionally, it has a USB slot, enabling you to connect a USB storage device and play audio files directly from it.

Furthermore, this device has an integrated FM/FM-STEREO radio tuner, providing access to a wide range of radio stations for your listening pleasure.

Customer Help Line 01422 263313
Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am –
4pm “Bank holidays as Sun”
USB/DITIGAL AUDIO/CD/Radio
Portable Pl
ayer
I N S T R U C T I O N M A N U A L
APUSB713A
www.ekey.co.uk (24HR)
WARNING
E-1
TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING : SHOCK HAZARD-DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
LIGHTNING FLASH WITH ARROWHEAD SYMBOL -
within an equilateral triangle, is intended to alert t
he
user to the presence of uninsulated dangero
us
voltage within the products enclosure that may be
of
sufficient magnitude to constitude a risk of electr
ic
shock to person
s.
EXCLAMATION POINT -
within an equilateral triangle,
is used to indicate that a specific component shall
be
replaced only by the component specified in th
at
documentation for safety reaso
n.
The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:
CLASS 1 LASER PRODUCT LABEL -
This label is attached to the place as illustrated to inform that t
he
apparatus contains a laser componen
t.
WARNING LABEL INFORMING OF RADIATION -
This label
is placed inside the unit. As shown in the illustration. To
warn against further measures on the unit. The equipment contains
a laser radiating laser rays according to the limit of laser product of
class 1.
CLASS 1 LASER PRODUCT
KLASS 1 LASER APPAR
AT
LUOKEN 1 LAISERLAI
TE
KLASSE 1 LASER PRODU
KT
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
The crossed ou
t “Wheelie bin” is intended to show that this appliance
must not be place
d with ordinary household waste at the end of its
usefu
l life. To prevent possible harm to the environment or human
health from un
controlled waste disposal,
please
keep separate from
other hous
ehold waste and recycle it responsibly to promote the
sustainable reuse of materi
al
resources.
Household us
ers should contact either the retailer where you
purchased the
product, or their local government office for details of
where and how you can take this item for environmentally safe re-
cycling.
Business users should contact t
heir supplier and check the terms and
conditions of the pu
rchase contract. This product must not be mixed
with other commercial wastes for disposal
SAFETY INSTRUCTIONS
E-2
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.
2. RETAIN INSTRUCTIO
NS - The safety and operating instruction should be retained for future reference.
3. HEED WARNIN
GS - All warnings on the appliance and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIO
NS - All operating instructions should be followed.
5. WATER AND MOISTU
RE - The appliance should not be used near water, for example, near a bathtub, washbowl,
kitchen sink, laundrytub, swimming pool or in a wet basement.
6. VENTILATIO
N - The appliance should be situated so that its location or position does not interfere with its proper
ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation opening
s.
7. HE
AT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances
(including amplifiers) that produce hea
t.
8. POWER SOUR
CE - The appliance should be connected to power supply only of the type described in the
operating instructions or as marked on the applianc
e.
9. POWER CORD PROTECTI
ON - Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against the
m.
10. OBJECT and LIQUID ENTR
Y - Care should be taken so that objects do not fall and liquids are not spilled into
the enclosure through opening
s.
11. ESD WARNI
NG - The display does not function properly or no reaction to operation of any the control may due
to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.
12. DAMAGE REQUIRING SERVIC
E - The appliance should be serviced by qualified service personnel when:
a. The power-supply cord or plug has been damaged
.
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure
.
c. The appliance has been exposed to rai
n.
d. The appliance has been dropped, or the enclosure damage
d.
e. The appliance does not appear to operate normally
.
13. SERVICIN
G - The user should not attempt to service the appliance beyond that described in the user operating
instructions. All other servicing should be referred to qualified service personnel.
Notes
:
a. Dirty or scratched CD may cause a skipping problem. Clean or replace the C
D.
b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the pow
er
back on
.
BEFORE OPERATION
Notes: CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings item
s
:
a. Usable compact discs. Use only compact disc with the mark shown belo
w
.
b. CD compact disc only with digital audio signal
s
.
to AC INto a wall outlet
BATTERY POWER
Insert 6 x C size batteries into the battery compartment. Be sure that the batteries are inserted
correctly to avoid damage to the appliance. Always remove the batteries when appliance will not be
used for a long period of time, as this will cause leakage to the batteries and subsequently damage
to your set.
Notes:
Use batteries of the same type. Do not mix battery types together.
When using batteries, disconnect the Mains supply lead
.
When not using batteries, remove from the battery compartment to preven
t
battery leakage damaging the appliance
POWER SOURCES
E-3
AC POWER
Connect to a 230/240V AC 50 Hz supply. Do not attempt to connect to any other source.
Insert 6 x “C” size batteries
into the battery compartment
LOCATION OF CONTROL
E-4
DIAL POINTER
SKIP -
POWER INDICATOR
STOP
PROGRAM
PLAY / PAUSE / USB
CD DOOR
FM ANTENNA
FUNCTION
SELECTOR
VOLUME
CONTROL
OPEN / CLOSE
LCD DISPLAY
FM STEREO INDICATOR
TUNING CONTROL
BAND SELECTOR
ALBUM
MODE
SKIP+
USB SLOT
GENERAL OPERATION
1. Set the “FUNCTION” selector to “RADIO” mode.
2. Select desired band by using the “BAND” selector.
3. Adjust radio frequency to your desired station by using the “TUNING” control.
4. Adjust the “VOLUME” control to the desired level.
FM / FM-STEREO RECEPTION
- Set the “BAND” selector to FM mode for MONO reception.
- Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up
to show FM ST. mode.
RADIO OPERATION
E-5
FOR BETTER RECEP
TION
- Rotate the antenna for better FM reception.
- Rotate the appliance for better AM reception.
CD / DIGITAL AUDIO OPERATION
E-6
GENERAL OPERATI
ON
PLAY / PAUSE / USB Press to start playing CD / DIGITAL AUDIO disc.
Press again to stop playing CD / DIGITAL AUDIO operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the sound.
STOP Press to stop all CD / DIGITAL AUDIO operation.
PLAYBACK
1. Set the “FUNCTION” selector to “CD / DIGITAL AUDIO” mode.
2. Open the CD door and place a CD / DIGITAL AUDIO disc with the label up in the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside.
- Total number of tracks is read and appears on the display.
5. Press the “PLAY / PAUSE / USB” button to start playing CD / DIGITAL AUDIO dis
c.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE / USB” button again when you want to stop playback temporarily.
8. Press the “STOP” button when finished.
MODE
Press the “MODE” button before or during play of CD / DIGITAL AUDIO discs
Each press selects the modes as follows:
1 - REPEAT 1
2 - REPEAT ALBUM ( *DIGITAL AUDIO ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
REPEAT 1
REP
REP
ALBUM
REP
ALL
REPE
AT
ALB
UM
REPE
AT
ALL
NORMAL
PLAYBA
CK
RAND
RAND
OM
CD / DIGITAL AUDIO OPERATION
PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “P01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button. (You may select a desired album
by pressing the “ALBUM” button).
3. Press the “PROGRAM” button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to play the
disc in the order you have programmed.
6. Press the “STOP” button twice to terminate programmed playback.
E-7
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / DIGITAL AUDIO. Please refer
to CD / DIGITAL AUDIO OPERATION.
USB OPERATION
E-8
GENERAL OPERAT
ION
Press to start playing tracks from the USB .
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the sound.
STOP Press to stop all USB operation.
PLAYBACK
1. Plug or slot in USB device to the port. (Make sure no disc on disc tray)
2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
3. Press and hold the “PLAY / PAUSE / USB” button for a few seconds to entry USB mode.
4. Playback will start automatically from the first track.
5. Press the “STOP” button when finished.
6. Press the “PLAY / PAUSE / USB” button again, playback will start from the first tra
ck.
PLAY / PAUSE / USB
If you are still having difficulty please call the Technical help line. Ring 01422 263313 (Normal
rates apply).
Opening hours Mon-Fir 8 am - 8 pm. Sat 9 am - 4 pm. Sun 11am - 4 pm. “Bank holidays as
Should you experience any problems please see guide below before calling the help line
FAULT GUIDE
E-9
Symptom Possible Cause Remedy
Dead No operation No power to player
Check the power plug is in
firmly
and connected to a
power supply.
If
batteries are fitted ensure
they
are new and fitted the
correct way round
No
radio operations but Led lit Function switch set to CD Switch to Radio or place a disc
into
the player
No
or noisy radio stations on
MW
Poor signal
Rotate
the case of the radio as
the
internal aerial is
directional. The externding rod
is not used on AM
No
or noisy stations on FM Poor signal Extend and rotate the rod
aerial
Dirty
or damaged discs.
Carefully
clean the disc and
place
in the player label side
up.Not
playing discs
Dirty Laser lens Carefully clean the laser lens
with a cotton bud
Disc inside CD compartment. Remove disc
Not
playing USB
USB
player not compatible.
Some
USB players are not
compatible.
Most USB
memory
sticks are compatible
Sun” or alternatively www.ekey.co.uk (24 Hr)
IMPORTANT
If the mains plug requires replacement, please follow the following instructions.
DO NOT CONNECT THE CENTRE PIN (EARTH).
Connect the Blue wire to the (N) terminal ( this may be
coloured blue).
Connect the Brown wire to the (L) terminal adjacent to
the fuse ( this may be coloured brown).
This appliance must have a 3A fuse fitted.
E-10
ON HANDLING DISCS ON CLEANING DISCS
Do not touch the playback side of the disc.
Do not attach paper or tape to disc.
Fingerprints and dust on the disc cause sound
distortion and skipping of tracks. Wipe the disc
from the centre outwards with a soft cloth.
If you can not wipe off the dust with a soft cloth,
wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.
Do not use any type of solvent such as thinne
Disc operation : CD and Ditigal Audio
(MP3). 7 cm 12 cm discs.
USB input.
r,
benzine, commercially available cleaners or anti-
static spray for vinyl Lps. It may damage the disc.
SPECIFICATIONS
Power Supply : 230V ~ 50Hz
Power Consumption : 12 Watt
Output Power(RMS) : 2 x 1W
Terminal impedence : Speaker 4ohms
Unit Dimensions : 236(L) x 227(W) x 118(H)mm
Net Weight : 1.5kg
Gross Weight : 1.7kg
Tuning Frequency : AM: 540-1600 KHz
FM: 88-108 MHz
DC Operation : 9V (6 X UM-2)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Akura APUSB713A User manual

Category
CD players
Type
User manual

Akura APUSB713A is a portable player that combines various audio playback capabilities. It features a built-in CD/Digital Audio player, allowing you to enjoy your favorite music from physical discs. Additionally, it has a USB slot, enabling you to connect a USB storage device and play audio files directly from it.

Furthermore, this device has an integrated FM/FM-STEREO radio tuner, providing access to a wide range of radio stations for your listening pleasure.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI