Datalogic Gryphon I GBT4400 Product Reference Manual
- Category
- Bar code readers
- Type
- Product Reference Manual
This manual is also suitable for
Gryphon™ I GD44XX/GBT4400
General Purpose Handheld
Area Imager Bar Code Reader
Product Reference Guide
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures
described ther
ein ma
y be reproduced or transmitted in any form or by any means without prior written permission
of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic
products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for
the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, includ-
ing copyright notices, contained in this documentation and shall ensure that all notices appear on any reproduc-
tions of the documentation.
Should future revisions of this manual be published, you can acquir
e print
ed versions by contacting your Datalogic
representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.data-
logic.com) or provided on appropriate media. If
you visit our website and would like to make comments or sugges-
tions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide informa
t
ion in this manual that is complete and accurate, how-
ever, Datalogic reserves the right to change any specificat
ion at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalo
gic S.p.A. in many countries, including the
U.S.A and the E.U. All other brand and product names referred to herein may be trademarks of their respective own-
ers.
Microsoft Windows®, Windows® XP and the Windows logo are registered trademarks of Microsoft Corporation.
Patents
CN1067263; CN1253957; EP1128315; EP1172756; EP1177
94
3; EP1396811; EP1413971; EP870787; EP999514;
JP4435343; US5311000; US5330370; US5481098; US6478224; US6512218; US6513714; US6561427; US6758403;
US6808114; US6877664; US6997385; US7053954; US7234641; US7387246; USD599799; USD606076.
Product Reference Guide
1
Table of Contents
INTRODUCTION ................................................................................................................................................................................ 9
About this Manual .......................................................................................................................................................................................... 9
Overview .................................................................................................................................................................................................................................................... 9
Manual Conventions ...........................................................................................................................................................................................................................10
References ..................................................................................................................................................................................................... 10
Technical Support ........................................................................................................................................................................................ 10
Datalogic Website Support ...............................................................................................................................................................................................................10
Reseller Technical Support ................................................................................................................................................................................................................10
Telephone Technical Support ..........................................................................................................................................................................................................10
About the Reader ......................................................................................................................................................................................... 11
The BC40xx™ Radio Base ............................................................................................................................................................................. 12
Base LEDs .................................................................................................................................................................................................................................................12
Base Button .............................................................................................................................................................................................................................................12
Battery Safety ............................................................................................................................................................................................... 13
Programming the Reader ............................................................................................................................................................................ 14
Configuration Methods ......................................................................................................................................................................................................................14
SETUP .............................................................................................................................................................................................. 15
Unpacking ..................................................................................................................................................................................................... 15
Setting Up the Reader .................................................................................................................................................................................. 15
Installing the Interface Cable ...................................................................................................................................................................... 16
Configuring the Base Station ...................................................................................................................................................................... 18
Changing the Base Station Position ..............................................................................................................................................................................................19
Connecting the Base Station ............................................................................................................................................................................................................20
Connecting the Base when Security Pin is Enabled .................................................................................................................................................................23
Linking the Reader to a Base Station .............................................................................................................................................................................................24
Linking a BT Reader to a PC ..............................................................................................................................................................................................................24
Stand Alone Layouts ...........................................................................................................................................................................................................................25
Interface Selection ....................................................................................................................................................................................... 27
Setting the Interface ............................................................................................................................................................................................................................27
Customizing Configuration Settings .......................................................................................................................................................... 31
Configure Interface Settings ............................................................................................................................................................................................................31
Global Interface Features ...................................................................................................................................................................................................................31
Configuring Other Features ..............................................................................................................................................................................................................31
Software Version Transmission .......................................................................................................................................................................................................31
Resetting the Product Configuration to Defaults .....................................................................................................................................................................32
Replacing the Battery ..........................................................................................................................................................................................................................33
CONFIGURATION USING BAR CODES............................................................................................................................................ 35
Configuration Parameters .................................................................................................................................................................................................................35
GLOBAL INTERFACE FEATURES .................................................................................................................................................. 37
Host Commands — Obey/Ignore .............................................................................................................................................................................37
USB Suspend Mode ........................................................................................................................................................................................................37
RS-232 ONLY Interface ........................................................................................................................................................... 39
Baud Rate ...........................................................................................................................................................................................................................40
Data Bits .............................................................................................................................................................................................................................41
Stop Bits ..............................................................................................................................................................................................................................41
Parity ....................................................................................................................................................................................................................................42
Handshaking Control ....................................................................................................................................................................................................43
RS-232/USB-Com Interfaces................................................................................................................................................... 44
Intercharacter Delay .......................................................................................................................................................................................................45
Beep On ASCII BEL ..........................................................................................................................................................................................................46
Beep On Not on File .......................................................................................................................................................................................................46
ACK NAK Options ............................................................................................................................................................................................................47
ACK Character ..................................................................................................................................................................................................................48
NAK Character ..................................................................................................................................................................................................................48
Contents
2
Gryphon™ I GD44XX/GBT4400
ACK NAK Timeout Value ...............................................................................................................................................................................................49
ACK NAK Retry Count ....................................................................................................................................................................................................49
ACK NAK Error Handling ...............................................................................................................................................................................................50
Indicate Transmission Failure .....................................................................................................................................................................................50
Disable Character ............................................................................................................................................................................................................51
Enable Character .............................................................................................................................................................................................................51
Keyboard SETTINGS ............................................................................................................................................................... 53
Country Mode ..................................................................................................................................................................................................................54
Send Control Characters ..............................................................................................................................................................................................56
Wedge Quiet Interval ....................................................................................................................................................................................................57
Intercode Delay ...............................................................................................................................................................................................................57
Caps Lock State ................................................................................................................................................................................................................58
Numlock .............................................................................................................................................................................................................................58
USB Keyboard Speed .....................................................................................................................................................................................................59
USB Keyboard Numeric Keypad ................................................................................................................................................................................60
USB-OEM Interface ................................................................................................................................................................. 61
USB-OEM Device Usage ................................................................................................................................................................................................62
Interface Options ............................................................................................................................................................................................................62
IBM 46XX Interface ................................................................................................................................................................. 63
46xx Number of Host Resets .......................................................................................................................................................................................64
Transmit Labels in Code 39 Format ..........................................................................................................................................................................66
Interface Options ............................................................................................................................................................................................................66
Wand Emulation Interface ..................................................................................................................................................... 67
Wand Signal Speed ........................................................................................................................................................................................................68
Wand Polarity ...................................................................................................................................................................................................................68
Wand Idle State ................................................................................................................................................................................................................69
Transmit Noise .................................................................................................................................................................................................................69
Label Symbology Conversion .....................................................................................................................................................................................70
Data Format ............................................................................................................................................................................ 71
Global Prefix/Suffix ...................................................................................................................................................................................... 72
Global AIM ID ................................................................................................................................................................................................ 73
Set AIM ID Individually for GS1-128 ...............................................................................................................................................................................................75
Label ID .......................................................................................................................................................................................................... 76
Label ID: Pre-Loaded Sets ..................................................................................................................................................................................................................76
Individually Set Label ID .....................................................................................................................................................................................................................77
Label ID Control ...............................................................................................................................................................................................................77
Label ID Symbology Selection − 1D Symbologies ..............................................................................................................................................78
Advanced Formatting: User Label Edit ...................................................................................................................................................................83
Case Conversion ..............................................................................................................................................................................................................83
Character Conversion ....................................................................................................................................................................................................84
Reading Parameters ............................................................................................................................................................. 85
Double Read Timeout ...................................................................................................................................................................................................86
LED AND BEEPER INDICATORS ................................................................................................................................................... 88
Power On Alert .................................................................................................................................................................................................................88
Good Read: When to Indicate .....................................................................................................................................................................................88
Good Read Beep Type ...................................................................................................................................................................................................89
Good Read Beep Frequency .......................................................................................................................................................................................89
Good Read Beep Length ..............................................................................................................................................................................................90
Good Read Beep Volume .............................................................................................................................................................................................91
Good Read LED Duration .............................................................................................................................................................................................92
SCANNING FEATURES ................................................................................................................................................................. 93
Scan Mode .........................................................................................................................................................................................................................93
Stand Operation ..............................................................................................................................................................................................................94
Pick Mode ..........................................................................................................................................................................................................................95
Stand Mode Sensitivity .................................................................................................................................................................................................95
High Motion Immunity .................................................................................................................................................................................................96
Stand Mode Illumination Off Time ...........................................................................................................................................................................96
Scanning Active Time ....................................................................................................................................................................................................97
Stand Illumination Control ..........................................................................................................................................................................................97
Flash On Time ...................................................................................................................................................................................................................98
Flash Off Time ...................................................................................................................................................................................................................98
Contents
Product Reference Guide
3
Aiming Pointer .................................................................................................................................................................................................................99
Aiming Duration Timer .............................................................................................................................................................................................. 100
Green Spot Duration ................................................................................................................................................................................................... 100
Mobile Phone Mode ................................................................................................................................................................................................... 101
Partial Label Reading Control .................................................................................................................................................................................. 101
Decode Negative Image ............................................................................................................................................................................................ 102
Image Capture .............................................................................................................................................................................................................. 102
MULTIPLE LABEL READING ......................................................................................................................................................103
Multiple Labels per Frame ........................................................................................................................................................................................ 103
Multiple Labels Ordering by Code Symbology ................................................................................................................................................. 104
Multiple Labels Ordering by Code Length ......................................................................................................................................................... 104
1D Symbologies.................................................................................................................................................................... 105
1D Code Selection ......................................................................................................................................................................................105
DISABLE ALL SYMBOLOGIES ....................................................................................................................................................106
CODE EAN/UPC ..........................................................................................................................................................................107
Coupon Control ............................................................................................................................................................................................................ 107
UPC-A ............................................................................................................................................................................................................................... 108
UPC-A Enable/Disable ................................................................................................................................................................................................ 108
UPC-A Check Character Transmission .................................................................................................................................................................. 108
Expand UPC-A to EAN-13 .......................................................................................................................................................................................... 109
UPC-A Number System Character Transmission .............................................................................................................................................. 109
UPC-A 2D Component ............................................................................................................................................................................................... 110
UPC-E ..........................................................................................................................................................................................110
UPC-E Enable/Disable ................................................................................................................................................................................................. 110
UPC-E Check Character Transmission ................................................................................................................................................................... 111
UPC-E 2D Component ................................................................................................................................................................................................ 111
Expand UPC-E to EAN-13 .......................................................................................................................................................................................... 112
Expand UPC-E to UPC-A ............................................................................................................................................................................................ 112
UPC-E Number System Character Transmission ............................................................................................................................................... 113
GTIN FORMATTING ....................................................................................................................................................................113
EAN 13 (JAN 13) .........................................................................................................................................................................114
EAN 13 Enable/Disable .............................................................................................................................................................................................. 114
EAN 13 Check Character Transmission ................................................................................................................................................................ 114
EAN-13 Flag 1 Character ............................................................................................................................................................................................ 115
EAN-13 ISBN Conversion ........................................................................................................................................................................................... 115
EAN-13 2D Component ............................................................................................................................................................................................. 116
ISSN ............................................................................................................................................................................................116
ISSN Enable/Disable .................................................................................................................................................................................................... 116
EAN 8 (JAN 8) .............................................................................................................................................................................117
EAN 8 Enable/Disable ................................................................................................................................................................................................. 117
EAN 8 Check Character Transmission ................................................................................................................................................................... 117
Expand EAN 8 to EAN 13 ........................................................................................................................................................................................... 118
EAN 8 2D Component ................................................................................................................................................................................................ 118
UPC/EAN GLOBAL SETTINGS ....................................................................................................................................................119
UPC/EAN Price Weight Check .................................................................................................................................................................................. 119
UPC/EAN Quiet Zones ................................................................................................................................................................................................ 120
ADD-ONS ....................................................................................................................................................................................121
Optional Add-ons ........................................................................................................................................................................................................ 121
Optional Add-On Timer ............................................................................................................................................................................................. 122
Optional GS1-128 Add-On Timer ........................................................................................................................................................................... 125
CODE 39 ......................................................................................................................................................................................128
Code 39 Enable/Disable ............................................................................................................................................................................................ 128
Code 39 Check Character Calculation .................................................................................................................................................................. 128
Code 39 Check Character Transmission .............................................................................................................................................................. 129
Code 39 Start/Stop Character Transmission ...................................................................................................................................................... 130
Code 39 Full ASCII ........................................................................................................................................................................................................ 130
Code 39 Quiet Zones .................................................................................................................................................................................................. 131
Code 39 Length Control ............................................................................................................................................................................................ 131
Code 39 Set Length 1 ................................................................................................................................................................................................. 132
Code 39 Set Length 2 ................................................................................................................................................................................................. 133
TRIOPTIC CODE ..........................................................................................................................................................................134
Trioptic Code Enable/Disable .................................................................................................................................................................................. 134
Contents
4
Gryphon™ I GD44XX/GBT4400
CODE 32 (ITAL PHARMACEUTICAL CODE) ...............................................................................................................................134
Code 32 Enable/Disable ............................................................................................................................................................................................ 134
Code 32 Feature Setting Exceptions ..................................................................................................................................................................... 135
Code 32 Check Char Transmission ........................................................................................................................................................................ 135
Code 32 Start/Stop Character Transmission ...................................................................................................................................................... 135
CODE 39 CIP (FRENCH PHARMACEUTICAL) .............................................................................................................................136
Code 39 CIP Enable/Disable ..................................................................................................................................................................................... 136
CODE 39 DANISH PPT ................................................................................................................................................................136
Code 39 Danish PPT Enable/Disable ..................................................................................................................................................................... 136
CODE 39 LAPOSTE .....................................................................................................................................................................137
Code 39 LaPoste Enable/Disable ............................................................................................................................................................................ 137
CODE 39 PZN ..............................................................................................................................................................................137
Code 39 PZN Enable/Disable ................................................................................................................................................................................... 137
CODE 128 ...................................................................................................................................................................................138
Code 128 Enable/Disable .......................................................................................................................................................................................... 138
Expand Code 128 to Code 39 .................................................................................................................................................................................. 138
Code 128 Check Character Transmission ............................................................................................................................................................ 139
Code 128 Function Character Transmission ...................................................................................................................................................... 139
Code 128 Sub-Code Exchange Transmission .................................................................................................................................................... 140
Code 128 Quiet Zones ................................................................................................................................................................................................ 140
Code 128 Length Control .......................................................................................................................................................................................... 141
Code 128 Set Length 1 ............................................................................................................................................................................................... 142
Code 128 Set Length 2 ............................................................................................................................................................................................... 143
GS1-128 ......................................................................................................................................................................................144
GS1-128 Enable ............................................................................................................................................................................................................. 144
GS1-128 2D Component ........................................................................................................................................................................................... 144
CODE ISBT 128 ...........................................................................................................................................................................145
ISBT 128 Concatenation ............................................................................................................................................................................................ 145
ISBT 128 Force Concatenation ................................................................................................................................................................................ 145
ISBT 128 Concatenation Mode ................................................................................................................................................................................ 146
ISBT 128 Dynamic Concatenation Timeout ........................................................................................................................................................ 147
ISBT 128 Advanced Concatenation Options ...................................................................................................................................................... 147
INTERLEAVED 2 OF 5 (I 2 OF 5) .................................................................................................................................................148
I 2 of 5 Enable/Disable ................................................................................................................................................................................................ 148
I 2 of 5 Check Character Calculation ..................................................................................................................................................................... 149
I 2 of 5 Check Character Transmission .................................................................................................................................................................. 150
I 2 of 5 Length Control ............................................................................................................................................................................................... 150
I 2 of 5 Set Length 1 ..................................................................................................................................................................................................... 151
I 2 of 5 Set Length 2 ..................................................................................................................................................................................................... 152
INTERLEAVED 2 OF 5 CIP HR .....................................................................................................................................................153
Interleaved 2 of 5 CIP HR Enable/Disable ............................................................................................................................................................ 153
FOLLETT 2 OF 5 ..........................................................................................................................................................................153
Follett 2 of 5 Enable/Disable .................................................................................................................................................................................... 153
STANDARD 2 OF 5 .....................................................................................................................................................................154
Standard 2 of 5 Enable/Disable .............................................................................................................................................................................. 154
Standard 2 of 5 Check Character Calculation .................................................................................................................................................... 154
Standard 2 of 5 Check Character Transmission ................................................................................................................................................. 155
Standard 2 of 5 Length Control .............................................................................................................................................................................. 155
Standard 2 of 5 Set Length 1 ................................................................................................................................................................................... 156
Standard 2 of 5 Set Length 2 ................................................................................................................................................................................... 157
INDUSTRIAL 2 OF 5 ....................................................................................................................................................................158
Industrial 2 of 5 Enable/Disable .............................................................................................................................................................................. 158
Industrial 2 of 5 Check Character Calculation .................................................................................................................................................... 158
Industrial 2 of 5 Check Character Transmission ................................................................................................................................................ 159
Industrial 2 of 5 Length Control .............................................................................................................................................................................. 159
Industrial 2 of 5 Set Length 1 ................................................................................................................................................................................... 160
Industrial 2 of 5 Set Length 2 ................................................................................................................................................................................... 161
CODE IATA ..................................................................................................................................................................................162
IATA Enable/Disable ................................................................................................................................................................................................... 162
IATA Check Character Transmission ..................................................................................................................................................................... 162
CODABAR ...................................................................................................................................................................................163
Codabar Enable/Disable ............................................................................................................................................................................................ 163
Contents
Product Reference Guide
5
Codabar Check Character Calculation .................................................................................................................................................................. 163
Codabar Check Character Transmission .............................................................................................................................................................. 164
Codabar Start/Stop Character Transmission ...................................................................................................................................................... 164
Codabar Start/Stop Character Set .......................................................................................................................................................................... 165
Codabar Start/Stop Character Match ................................................................................................................................................................... 165
Codabar Quiet Zones .................................................................................................................................................................................................. 166
Codabar Length Control ............................................................................................................................................................................................ 166
Codabar Set Length 1 ................................................................................................................................................................................................. 167
Codabar Set Length 2 ................................................................................................................................................................................................. 168
ABC CODABAR ...........................................................................................................................................................................169
ABC Codabar Enable/Disable .................................................................................................................................................................................. 169
ABC Codabar Concatenation Mode ...................................................................................................................................................................... 169
ABC Codabar Dynamic Concatenation Timeout .............................................................................................................................................. 170
ABC Codabar Force Concatenation ....................................................................................................................................................................... 171
CODE 11 ......................................................................................................................................................................................172
Code 11 Enable/Disable ............................................................................................................................................................................................ 172
Code 11 Check Character Calculation .................................................................................................................................................................. 172
Code 11 Check Character Transmission .............................................................................................................................................................. 173
Code 11 Length Control ............................................................................................................................................................................................ 173
Code 11 Set Length 1 ................................................................................................................................................................................................. 174
Code 11 Set Length 2 ................................................................................................................................................................................................. 175
GS1 DATABAR™ OMNIDIRECTIONAL .......................................................................................................................................176
GS1 DataBar™ Omnidirectional Enable/Disable ............................................................................................................................................... 176
GS1 DataBar™ Omnidirectional GS1-128 Emulation ....................................................................................................................................... 176
GS1 DataBar™ Omnidirectional 2D Component .............................................................................................................................................. 177
GS1 DATABAR™ EXPANDED .....................................................................................................................................................177
GS1 DataBar™ Expanded Enable/Disable ............................................................................................................................................................ 177
GS1 DataBar™ Expanded GS1-128 Emulation ................................................................................................................................................... 178
GS1 DataBar™ Expanded 2D Component ........................................................................................................................................................... 178
GS1 DataBar™ Expanded Length Control ........................................................................................................................................................... 179
GS1 DataBar™ Expanded Set Length 1 ................................................................................................................................................................. 180
GS1 DataBar™ Expanded Set Length 2 ................................................................................................................................................................. 181
GS1 DATABAR™ LIMITED ..........................................................................................................................................................182
GS1 DataBar™ Limited Enable/Disable ................................................................................................................................................................. 182
GS1 DataBar™ Limited GS1-128 Emulation ........................................................................................................................................................ 182
GS1 DataBar™ Limited 2D Component ................................................................................................................................................................ 183
CODE 93 ......................................................................................................................................................................................183
Code 93 Enable/Disable ............................................................................................................................................................................................ 183
Code 93 Check Character Calculation .................................................................................................................................................................. 184
Code 93 Check Character Transmission .............................................................................................................................................................. 184
Code 93 Length Control ............................................................................................................................................................................................ 185
Code 93 Set Length 1 ................................................................................................................................................................................................. 186
Code 93 Set Length 2 ................................................................................................................................................................................................. 187
Code 93 Quiet Zones .................................................................................................................................................................................................. 188
MSI ..............................................................................................................................................................................................188
MSI Enable/Disable ...................................................................................................................................................................................................... 188
MSI Check Character Calculation ........................................................................................................................................................................... 189
MSI Check Character Transmission ........................................................................................................................................................................ 189
MSI Length Control ..................................................................................................................................................................................................... 190
MSI Set Length 1 .......................................................................................................................................................................................................... 191
MSI Set Length 2 .......................................................................................................................................................................................................... 192
PLESSEY ......................................................................................................................................................................................193
Plessey Enable/Disable .............................................................................................................................................................................................. 193
Plessey Check Character Calculation .................................................................................................................................................................... 193
Plessey Check Character Transmission ................................................................................................................................................................ 194
Plessey Length Control .............................................................................................................................................................................................. 194
Plessey Set Length 1 ................................................................................................................................................................................................... 195
Plessey Set Length 2 ................................................................................................................................................................................................... 196
2D Symbologies.................................................................................................................................................................... 197
2D Global Features .....................................................................................................................................................................................197
2D Maximum Decoding Time ....................................................................................................................................................................................................... 198
2D Structured Append .................................................................................................................................................................................................................... 199
Contents
6
Gryphon™ I GD44XX/GBT4400
2D Normal/Inverse Symbol Control ............................................................................................................................................................................................ 199
Aztec Code ..................................................................................................................................................................................................200
Aztec Code Enable / Disable .......................................................................................................................................................................................................... 200
Aztec Code Multiframe .................................................................................................................................................................................................................... 200
Aztec Code Length Control ........................................................................................................................................................................................................... 201
Aztec Code Set Length 1 ........................................................................................................................................................................................... 201
Aztec Code Set Length 2 ........................................................................................................................................................................................... 202
China Sensible Code ...................................................................................................................................................................................203
China Sensible Code Enable / Disable ....................................................................................................................................................................................... 203
China Sensible Code Length Control ......................................................................................................................................................................................... 203
China Sensible Code Set Length 1 ......................................................................................................................................................................... 204
China Sensible Code Set Length 2 ......................................................................................................................................................................... 205
Data Matrix .................................................................................................................................................................................................206
Data Matrix Enable / Disable ......................................................................................................................................................................................................... 206
Data Matrix Square/Rectangular Style ....................................................................................................................................................................................... 206
Data Matrix Length Control ........................................................................................................................................................................................................... 207
Data Matrix Set Length 1 ........................................................................................................................................................................................... 207
Data Matrix Set Length 2 ........................................................................................................................................................................................... 208
Maxicode .....................................................................................................................................................................................................209
Maxicode Enable / Disable ............................................................................................................................................................................................................. 209
Maxicode Primary Message Transmission ................................................................................................................................................................................ 209
Maxicode Length Control ............................................................................................................................................................................................................... 210
Maxicode Set Length 1 .............................................................................................................................................................................................. 210
Maxicode Set Length 2 .............................................................................................................................................................................................. 211
PDF417 ........................................................................................................................................................................................................212
PDF417 Enable / Disable ................................................................................................................................................................................................................. 212
PDF417 Multiframe ........................................................................................................................................................................................................................... 212
PDF417 Length Control ................................................................................................................................................................................................................... 213
PDF417 Set Length 1 .................................................................................................................................................................................................. 213
PDF417 Set Length 2 .................................................................................................................................................................................................. 214
Micro PDF417 ..............................................................................................................................................................................................215
Micro PDF417 Enable / Disable .................................................................................................................................................................................................... 215
Micro PDF417 Code 128 GS1-128 Emulation .......................................................................................................................................................................... 215
Micro PDF417 Length Control ...................................................................................................................................................................................................... 216
Micro PDF417 Set Length 1 ...................................................................................................................................................................................... 216
Micro PDF417 Set Length 2 ...................................................................................................................................................................................... 217
QR Code .......................................................................................................................................................................................................218
QR Code Enable / Disable ............................................................................................................................................................................................................... 218
QR Code Multiframe ......................................................................................................................................................................................................................... 218
QR Code Length Control ................................................................................................................................................................................................................. 219
QR Code Set Length 1 ................................................................................................................................................................................................ 219
QR Code Set Length 2 ................................................................................................................................................................................................ 220
Micro QR Code ............................................................................................................................................................................................221
Micro QR Code Enable/Disable .................................................................................................................................................................................................... 221
Micro QR Code Length Control .................................................................................................................................................................................................... 221
Micro QR Code Set Length 1 .................................................................................................................................................................................... 222
Micro QR Code Set Length 2 .................................................................................................................................................................................... 223
UCC Composite ...........................................................................................................................................................................................224
UCC Composite Enable / Disable ................................................................................................................................................................................................. 224
UCC Optional Composite Timer ................................................................................................................................................................................................... 225
Postal Code Selection .................................................................................................................................................................................226
Postnet BB Control ............................................................................................................................................................................................................................ 227
WIRELESS FEATURES ............................................................................................................................................................ 229
WIRELESS BEEPER FEATURES ...................................................................................................................................................230
Good Transmission Beep .......................................................................................................................................................................................... 230
Beep Frequency ............................................................................................................................................................................................................ 230
Beep Duration ............................................................................................................................................................................................................... 231
Beep Volume ................................................................................................................................................................................................................. 232
Disconnect Beep .......................................................................................................................................................................................................... 232
Docking Beep ................................................................................................................................................................................................................ 233
Leash Alarm .................................................................................................................................................................................................................... 233
CONFIGURATION UPDATES ......................................................................................................................................................235
Contents
Product Reference Guide
7
Automatic Configuration Update .......................................................................................................................................................................... 235
Copy Configuration to Scanner .............................................................................................................................................................................. 235
Copy Configuration to Base Station ...................................................................................................................................................................... 235
BATCH FEATURES ......................................................................................................................................................................236
Batch Mode .................................................................................................................................................................................................................... 236
Send Batch ...................................................................................................................................................................................................................... 236
Erase Batch Memory ................................................................................................................................................................................................... 237
RF Batch Mode Transmit Delay ............................................................................................................................................................................... 237
ACK TIMEOUT ............................................................................................................................................................................238
RF ADDRESS STAMPING ............................................................................................................................................................238
Source Radio Address Transmission ..................................................................................................................................................................... 238
Source Radio Address Delimiter Character ........................................................................................................................................................ 239
DIRECT RADIO AUTOLINK .........................................................................................................................................................239
Link Timeout .................................................................................................................................................................................................................. 240
Bluetooth-Only Features...................................................................................................................................................... 241
BT SECURITY FEATURES ............................................................................................................................................................241
BT Security Mode ......................................................................................................................................................................................................... 241
BT PIN Code .................................................................................................................................................................................................................... 242
Select PIN Code Length ............................................................................................................................................................................................. 242
Set PIN Code .................................................................................................................................................................................................................. 242
OTHER BT FEATURES .................................................................................................................................................................243
BT Poll Rate ..................................................................................................................................................................................................................... 243
Power Off ........................................................................................................................................................................................................................ 243
Powerdown Timeout .................................................................................................................................................................................................. 244
MOTION FEATURES............................................................................................................................................................... 245
Motion Aiming Control .............................................................................................................................................................................................. 245
Motion Sensitivity ........................................................................................................................................................................................................ 246
Motionless Timeout .................................................................................................................................................................................................... 246
REFERENCES................................................................................................................................................................................. 247
RS-232 Parameters .....................................................................................................................................................................................247
RS-232 Only ......................................................................................................................................................................................................................................... 247
RS-232/USB COM Parameters ....................................................................................................................................................................................................... 248
Keyboard Interface .....................................................................................................................................................................................256
Wedge Quiet Interval ....................................................................................................................................................................................................................... 256
Intercharacter Delay ......................................................................................................................................................................................................................... 257
Intercode Delay .................................................................................................................................................................................................................................. 258
Symbologies ...............................................................................................................................................................................................259
Set Length ............................................................................................................................................................................................................................................ 259
Data Editing ................................................................................................................................................................................................260
Global Prefix/Suffix ........................................................................................................................................................................................................................... 261
Global AIM ID ...................................................................................................................................................................................................................................... 262
Label ID ................................................................................................................................................................................................................................................. 263
Character Conversion ...................................................................................................................................................................................................................... 268
Reading Parameters ...................................................................................................................................................................................269
Label Gone Timeout ......................................................................................................................................................................................................................... 269
Good Read LED Duration ................................................................................................................................................................................................................ 270
Scanning Features ......................................................................................................................................................................................271
Scan Mode ........................................................................................................................................................................................................................................... 271
Stand Mode Off Time ....................................................................................................................................................................................................................... 272
Scanning Active Time ...................................................................................................................................................................................................................... 273
Aiming Duration Time ..................................................................................................................................................................................................................... 274
Flash On Time ..................................................................................................................................................................................................................................... 275
Flash Off Time ..................................................................................................................................................................................................................................... 276
Multiple Labels Ordering by Code Symbology ...................................................................................................................................................................... 277
RF Features .................................................................................................................................................................................................279
Automatic Configuration Update ................................................................................................................................................................................................ 279
RF Address Stamping ....................................................................................................................................................................................................................... 279
BT-Only Features ............................................................................................................................................................................................................................... 280
TECHNICAL SPECIFICATIONS...................................................................................................................................................... 281
Standard Cable Pinouts .............................................................................................................................................................................285
LED and Beeper Indications .......................................................................................................................................................................287
Contents
8
Gryphon™ I GD44XX/GBT4400
Error Codes ..................................................................................................................................................................................................288
Base Station Indications (GBT4400 Models ONLY) ..................................................................................................................................289
STANDARD DEFAULTS................................................................................................................................................................ 291
Sample Barcodes ......................................................................................................................................................................... 303
KEYPAD ........................................................................................................................................................................................ 307
SCANCODE TABLES ..................................................................................................................................................................... 309
Control Character Emulation .....................................................................................................................................................................309
Single Press and Release Keys ....................................................................................................................................................................................................... 309
Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLE ...............................................................................................310
Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode ...........................................................................................................312
Digital Interface ..........................................................................................................................................................................................314
IBM31xx 102-key ........................................................................................................................................................................................315
IBM XT ..........................................................................................................................................................................................................316
Microsoft Windows Codepage 1252 .........................................................................................................................................................317
Product Reference Guide
9
Chapter 1
Introduction
About this Manual
This Product Reference Guide (PRG) is provided for users seeking advanced technical
information, including connection, programming, maintenance and specifications. The Quick
Reference Guide (QRG) and other publications associated with this product are downloadable
free of charge from the website listed on the back cover of this manual.
Overview
Chapter 1, (this chapter) presents information about manual conventions, and an overview of
the reader, its features and operation.
Chapter 2, Setup presents information about unpacking, cable connection information and
setting up the reader.
Chapter 3, Configuration Using Bar Codes provides instructions and bar code labels for customizing
your reader. There are different sections for interface ty
pes, general features, data formattin
g,
symbology-specific and model-specific features.
Chapter 4, References provides background information and detailed instructions for more
complex programming items.
Appendix A, Technical Specifications lists physical and performance characteristics, as well as
en
vironmental and regulatory specifications. It also provides standard cable pin-outs and LED/
Beeper functions.
App
endix B, Standard Defaults references common factory default settings for reader features and
options.
Appendix C, Sample Bar Codes offers sample bar codes of several common symbologies.
Appendix D, Keypad includes numeric bar codes to be scanned for certain parameter settings.
Appendix E, Scancode Tables lists control character emulation information for Wedge and USB
Keyboard interfaces.
Introduction
10
Gryphon™ I GD44XX/GBT4400
Manual Conventions
The following conventions are used in this document:
The symbols listed below are used in this manual to not
ify the reader of key issues or procedures
that must be observed when using the reader:
Notes contain information necessary for properly diagnosing, repairing
and operating the reader.
CAUTION
The CAUTION symbol advises you of actions that could damage equip-
ment or property.
References
Current versions of this Product Reference Guide (PRG), Quick Reference Guide (QRG), the
Datalogic Aladdin™ Configuration application, and any other manuals, instruction sheets and
utilities for this product can be downloaded from the website listed below. Alternatively, printed
copies or product support CDs for most products can be purchased through your Datalogic
reseller.
Technical Support
Datalogic Website Support
The Datalogic website (www.scanning.datalogic.com) is the complete source for technical
support and information for Datalogic products. The site offers product support,
product
registration, warranty information, product manuals, product tech notes, software updates,
demos, and instructions for returning products for repair.
Reseller Technical Support
An excellent source for technical assistance and information is an authorized Datalogic reseller.
A reseller is acquainted with specific types of businesses, application software, and computer
systems and can provide individualized assistance.
Telephone Technical Support
If you do not have internet or email access, you may contact Datalogic technical support at
(541) 349-8283 or check the back cover of your manual for more contact information.
About the Reader
Product Reference Guide
11
About the Reader
Typically, units are factory-programmed for the most common terminal and communications
settings. If you need to modify any programmable settings, custom configuration can be
accomplished by scanning the programming bar codes within this guide.
Two models of the Gryphon 2D are available, and are covered in this manual:
• Gryphon I GD44XX - Corded 2D imager bar code reader
•
Gryphon I GBT4400 - Model with B
luetooth options.
Programming can alternatively be performe
d using the Datalogic Aladdin™ Configuration
application which is downloadable from the Datalogic website listed on the back cover of this
manual. This multi-platform utility program allows device configuration using a PC. It
communicates to the device using a serial or USB cable and can also create configuration bar
codes to print.
Advancements in the LED technology used in the imager-based readers significantly improve
the
illumination
of the target field of view, resulting in higher scan efficiency. Whether used in
Single Trigger or Continuous Mode, the ergonomic design of the reader will help to promote
comfortable handling during extended periods of use.
See "Interface Selection" on page 27 for a listing and descriptions of available interface sets
by
model type.
Introduction
12
Gryphon™ I GD44XX/GBT4400
The BC40xx™ Radio Base
Base LEDs
LEDs on the Gryphon Base provide information about the Base’s status, as shown in Figure 1.
Figure 1
YELLOW LED
RED LED /
GREEN LED
BUTTON
. Gryphon Base LEDs
The following table describes the significance of each LED:
LED STATUS
Power on / Data
Yellow On = Base is powered
Yellow Blinking = Base receives data and
commands from the Host or the Reader.
Charging Red On = Battery charging is in progress.
Charge completed Green On = the Battery is completely charged.
Charging + Charge completed
Red and Green Blinking together = the Reader is not
c
orrectly placed onto the Base.
See Base Station Indications (GBT4400 Models ONLY) on page 289 for more specific details on the
LEDs.
Base Button
The Base contains a button which is used primarily to perform a paging function. Pressing the
button causes a sound signal to be emitted by all scanners linked with this Base, as long as the
scanner is awake (see Powerdown Timeout on page 244) and reception is enabled (see LED and
Beeper Indicators on page 88). The button can also be used to "force device connection" via the
Datalogic Aladdin Software tool (available for free download from the Datalogic website). See
the Aladdin Online Help for
details.
For the BT model, press quickly (less than one second) to initiate paging. Press and hold (longer
than one second) to enable
radio linking. This will make the base discoverable from a BT
master.
Battery Safety
Product Reference Guide
13
Battery Safety
To reinstall, charge and/or perform any other action on the battery, follow the instructions in
this manual.
WARNING
CAUTION
Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.
Use only the authorized power supplies, battery pack,
chargers, and docks supplied by your Data-
logic reseller. The use of any other power supplies can damage the device and void your warranty.
Do not disassemble or modify the battery. The batter
y co
ntains safety and protection devices,
which, if damaged, may cause the battery to generate heat, explode or ignite.
Do not place the battery in or near fire, on stov
es or other hig
h temperature locations.
Do not place the battery in direct sunlight, or use or store the battery inside cars in hot weather.
Doing so may cause the batter
y to generate heat, explode or ignite. Using the battery in this man-
ner may also result in a loss of performance and a shortened life expectancy.
Do not place the battery in microwave ovens, high-pr
essur
e containers or on induction cookware.
Immediately discontinue use of the battery if, while using, charging or storing the ba
ttery, the bat-
tery emits an unusual smell, feels hot, changes color or shape, or ap
pears abnormal in any other
way.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Do not discharge the battery using any device except f
or the scanner
. When the battery is used in
devices other than the designated product, it may damage the battery or reduce its life expec-
tancy. If the device causes an abnormal current to flow
, it may cause the battery to become hot,
explode or ignite and cause serious injury.
Lithium-ion battery packs may get hot, explode or ignite and cause serious injury if exposed to
abusive conditions. Be sure to follow the safety warnings listed below:
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and negativ
e terminal of the ba
ttery pack to each other
with any metal object (such as wire).
• Do not carry or store the battery pack together with metal objects.
• Do not pierce the battery pack with nails, strike it
wi
th a hammer, step on it or otherwise sub-
ject it to strong impacts or shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or allow the battery to get wet.
• Do not apply voltages to the battery pack contacts.
In the event the battery pack leaks and the fluid gets in
to
your eye, do not rub the eye. Rinse well
with water and immediately seek medical care. If left untreated, the battery fluid could cause
damage to the eye.
Before installing the Battery, read “Battery Safety” on this and the following pages. Datalogic rec-
ommends annual replacement of rechargeable ba
ttery
packs to ensure maximum performance.
Introduction
14
Gryphon™ I GD44XX/GBT4400
As with other types of batteries, Lithium-Ion (LI) batteries will lose capacity over time. Capacity
deterioration is noticeable after one year of service whether the battery is in use or not. It is
difficult to precisely predict the finite life of a LI battery, but cell manufacturers rate them at
500 charge cycles. In other words, the batteries should be expected to take 500 full discharge /
charge cycles before needing replacement. This number is higher if partial discharging /
recharging is adhered to rather than full / deep discharging,
The typical manufacturer advertised useful life of LI bat
teries is one to three years, depending
on usage and number of charges, etc., after which they should be removed from service,
especially in mission critical applications. Do not continue to use a battery that is showing
excessive loss of capacity, it should be properly recycled / disposed of and replaced. For most
applications, batteries should be replaced after one year of service to maintain customer
satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from t
he device in compliance with European
Directive 2006/66/EC, 2002/95/EC, 2002/96/EC and subsequent modifications, US and
China regulatory and others laws and regulations about the environment.
Programming the Reader
Configuration Methods
Programming Bar Codes
The reader is factory-configured with a standard set of default features. After scanning the
interface bar code, you can select other options and customize your reader through use of the
instructions and programming bar code labels available in the corresponding features section for
your interface. Customizable settings for many features are found in "Configuration Parameters"
starting on page 35.
Some programming labels, like "Restore Custom Defaults" on page 32, require only the scan of the
single label to enact the change. Most, however, require the r
eader to be placed in Programming
Mode prior to scanning them. Scan an ENTER/EXIT bar code once to enter Programming
Mode. Once the reader is in Programming Mode, scan a number of parameter settings before
scanning the ENTER/EXIT bar code a second time, which will then accept your changes, exit
Programming Mode and return the reader to normal operation.
There are some exceptions to the typical programming sequence described
above. Please read the description and setting instructions carefully when
configuring each programmable feature.
Datalogic Aladdin™
Datalogic Aladdin™ is a multi-platform utility program providing a quick and user-friendly
configuration method via the RS-232/USB-COM interface. Aladdin is available on the CD-
ROM provided with your product, and also from the Datalogic website. Aladdin allows you to
program the reader by selecting configuration commands through a user-friendly graphical
interface running on a PC. These commands are sent to the reader over the selected
communication interface, or they can be printed as bar codes to be scanned.
Aladdin also provides the ability to perform a software upgrade for th
e connected device (see the
Datalogic Aladdin™ Help On-Line for more details).
Product Reference Guide
15
Chapter 2
Setup
Unpacking
Check carefully to ensure the reader and any accessories ordered are present and undamaged. If
any damage occurred during shipment, contact Datalogic Technical Support. Information is
shown on page 10.
KEEP THE PACKAGING. Should the unit ever require se
rvice, it should be returned in its
original shipping container.
Setting Up the Reader
Depending on whether you are using a Corded or BT version of the Gryphon, follow the steps
provided in this section to connect and get your reader up and communicating with its host.
1. Begin by Installing the Interface Cable (Corded) or Connecting
the Base Station (BT)
2. Go to Interface Selection and set the desired interface.
3. Configure Interface Settings (only if not using factory settings for that interface)
4. Go to Configuring Other Features (if modifications are needed from factory settings)
Setup
16
Gryphon™ I GD44XX
/
GBT4400
Installing the Interface Cable
For Corded versions, connect the reader cable by inserting the cable into the handle as shown in
Figure 2. To remove it, insert a paper clip into the rele
ase aperture, then unplug the cable.
Figure 2. Connect/disconnect the cable
RS-232 Serial Connection
Turn off power to the terminal/PC and connect the reader to the terminal/PC serial port via the
RS-232 cable as shown in Figure 3. If the terminal will not support POT (Power Off the
Terminal) to supply reader power, use the approved power supply (AC Adapter). Plug the AC
Adapter barrel connector into th
e socket on the RS-232 cable connector and the AC Adapter
plug into a standard power outlet.
Figure 3. RS-232 Connection
Installing the Interface Cable
Product Reference Guide
17
Keyboard Wedge Connection
The Keyboard Wedge cable has a ‘Y’ connection from the reader. Connect the female to the
male end from the keyboard and the remaining end at the keyboard port at the terminal/PC.
Reference Figure 4.
Figure 4. Keyboard Wedge Interface connection
USB Connection
Connect the reader to a USB port on the terminal/PC using the correct USB cable for the
interface type you ordered. Reference Figure 5.
Figure 5. USB connection
Other connection types are described below and illustrated in Figure 6.
Setup
18
Gryphon™ I GD44XX
/
GBT4400
Figure 6. Other Interface Connections
W
a
n
d
I
B
M
K
e
y
b
o
a
r
d
W
e
d
g
e
or...
or...
Specific cables are required for connection to different hosts. The connec-
tors illustrated above are examples only. Ac
tual connectors may vary from
those illustrated, but the steps to connect the reader remain the same.
RF Models
The power supply connects directly to the base (not on the cable's jack) for all configurations.
For all interfaces (except RS-232) a power supply is recommended but not necessary, because
the base can be powered from the Host. When the base is powered from the Host, select a slow
charge rate.
Configuring the Base Station
The base charger/station may be configured in desk application to hold the reader in two
different positions, either a horizontal or standing position, in order to provide the most
comfortable use depending on needs.
Standing
Horizontal
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
Datalogic Gryphon I GBT4400 Product Reference Manual
- Category
- Bar code readers
- Type
- Product Reference Manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Datalogic Gryphon I GD440X Product Reference Manual
-
Datalogic PowerScan 9500 Series Owner's manual
-
-
-
Datalogic SpA OMJ0013 User manual
-
Datalogic Gryphon M200 Reference guide
-
Datalogic Gryphon I GPS4400 2D Owner's manual
-
-
-
Other documents
-
HP RP9 G1 Retail System Model 9018 Base Model Reference guide
-
HP RP7 Retail System Model 7800 Base Model Reference guide
-
-
Code Soft BS501 series User manual
-
Code Soft BS501 series User manual
-
Code Soft BS501 series User manual
-
Code Soft BS501 series User manual
-
Zebex Z-3051HS (U)(B) Specification
-
Logic Controls S303D User manual
-
Renkforce LS6302J Owner's manual
