2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Metra
  7. DP-3002B

Metra DP-3002B Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Metra DP-3002B Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
APPLICATIONS
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 4/6/2015 INSTDP-3002B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART DP-3002B
• DoubleDINradioprovision
• Painted scratch resistant matte black
•A)Radiotrimpanel•B)Brackets•C)(11)Panelclips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS(soldseparately)
Wiringharness:•70-1858(modelswithoutafactoryamp)•70-1859(modelswithafactoryamp)
AntennaAdapter:•40-GM10
•Phillipsscrewdriver•Panelremovaltool
TOOLS REQUIRED
GM full-size trucks and SUV
’
s’1999-2002
(models with message center in the factory instrument cluster)
DP-3002B
A B C
Dash Disassembly
– GMfull-sizetrucksandSUV’s1999-2002
(models with message center in the factory
instrument cluster)............................................... 2
Kit Assembly
– Double DINradioprovision................................... 3
Table of Contents
DP-3002B
2
Dash Disassembly
1. Unsnapandremovethefactory
dashpanel.(FigureA)
2. Depressthetabssecuringthe
factoryradioandremove.
3. Removethemetalpanelclipsfrom
thefactorydashpanel.
(tip: spread the clip apart from
the plastic before pulling it off
the plastic)
4. Cutandremovetheradiorear
supportshelffromthedashcavity.
Continue to kit assembly
(Figure A)
DP-3002B
Kit Assembly
ISO DDIN radio provision
1. Installthe(11)includedpanelclips
totheradiotrimpanel.Thefactory
panelclipsmaybeusedifdesired.
2. Locatethefactorywiringharness
inthedash.Metrarecommends
usingthepropermatingadapter
fromMetraorAXXESS.Re-connect
thenegativebatteryterminaland
testtheunitforproperoperation.
3. Attachtheradiotothebrackets
andmountintodashopening.
(FigureA)
4. SnaptheMetraradiotrimpanel
overthenewradio.
3
(Figure A)
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 4/6/2015 INSTDP-3002B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
INSTALLATION INSTRUCTIONS FOR PART 99-7883HG
/