Metra 82-1011 Operating instructions

Metra
Brand
Metra
Model
82-1011
Category
Car speakers
Type
Operating instructions

Metra 82-1011 allows you to replace the factory 4” x 6” speaker in your 1997-2006 Jeep Wrangler with an aftermarket speaker. The kit includes speaker adapter plates and screws for easy installation. No cutting or splicing is required.

Metra 82-1011 allows you to replace the factory 4” x 6” speaker in your 1997-2006 Jeep Wrangler with an aftermarket speaker. The kit includes speaker adapter plates and screws for easy installation. No cutting or splicing is required.

APPLICATIONS
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 12/9/2013 INST82-1011
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 82-1011
• 82-1011 (adapts 4” x 6” speaker to dash location)
• A) 82-1011 Speaker adaptor plates • B) (8) #8 x 1/2” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 72-6512 speaker harness
Antenna Adapter: • Not required
• Phillips screwdriver
TOOLS REQUIRED
Jeep Wrangler 1997-2006
82-1011
A
Dash Disassembly
– Jeep Wrangler 1997-2006 ............................... 2
Kit Preparation ....................................................... 2
Kit Assembly .......................................................... 3
Table of Contents
B
82-1011
Dash Disassembly Kit Preparation
(Figure A)
2
Note: Parts 82-1011, 82-1012, 82-1013 installation directions cross reference.
Use the following instructions for each dash location.
1. Remove (2) Phillips screws securing the speaker grille panel. (Figure A)
2. Unclip panel and remove. (Figure A)
Continue to kit preparation
(Figure A)
1. Mount aftermarket speaker to the speaker adaptor plate with the screws
supplied with the speaker. (Figure A)
Continue to kit assembly
82-1011
3
Kit Assembly
1. Locate the factory wiring harness in the dash. Metra recommends using the
72-6512 speaker harness to connect to the factory wiring.
Note: For some speakers a small cut in the factory speaker support
may be necessary.
2. Mount the assembly to the dash location with the (4) supplied
#8 x 1/2” Phillips screws.
Notes
(Figure A)
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 12/9/2013 INST82-1011
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
INSTALLATION INSTRUCTIONS FOR PART 82-1011
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Metra 82-1011 Operating instructions

Metra
Brand
Metra
Model
82-1011
Category
Car speakers
Type
Operating instructions

Metra 82-1011 allows you to replace the factory 4” x 6” speaker in your 1997-2006 Jeep Wrangler with an aftermarket speaker. The kit includes speaker adapter plates and screws for easy installation. No cutting or splicing is required.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents