1of4
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
H
Glass Panel
Table of
Contents
STEP 1
FixtureHeightAdjustable
24.75”to120.75”
Fixture Chain
x1
E
Ceiling Canopy
x1
F
Quick Link
x1
D
Preparation: Identify and inspect all parts before beginning the installation.
Missing or damaged parts? Contact your original place of purchase.
Fixture Loop
x1
G
Outlet Box Screw
x2
B
Wire Connector
x3
C
LightSource
3BULBSREQUIRED
BULBSNOTINCLUDED
Glass Panel
x4
I
Fixture Loop
STEP 2
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Crossbar Assembly
STEP 3
Fixture Chain
STEP 4
Wiring
STEP 5 STEP 6 STEP 7
Ceiling Canopy Bulb
Installation Instructions: UQL1641
www.urbanambiance.com
2of4
STEP 1 1
Remove cage
2 3
A
A
Remove glass panel holder Install glass panel
4
Install glass panel holder
5
Install cage
STEP 2
N
L
N
L
STEP 3 1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
www.urbanambiance.com
3of4
STEP 4
2
Step2-3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling:
9’ ceiling:
10’ ceiling:
11” Chain
23” Chain
35” Chain
STEP 5
1 2
Step 1
Feed the fixture wires
through the loop
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
N
L
N
L
www.urbanambiance.com
4of4
STEP 6
STEP 7
www.urbanambiance.com
/
