Crossbar Assembly
STEP 2
1 of 4
Light SourceTools Required
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
150W
MAX
1 BULB REQUIRED
BULB NOT INCLUDED
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG
I
Glass Panels
& Fixture Loop
Table of
Contents
STEP 1
Fixture Chain
x 1
E
Ceiling Canopy
x 1
F
Quick Link
x 2
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Loop
x 1
G
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Fixture Body
x 1
H
Ceiling Canopy Bulb
STEP 6
Glass Panel
x 4
STEP 5
Fixture Chain Wiring
STEP 4STEP 3
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Fixture Height Adjustable
25.75” to 121.75”
Installation Instructions: UQL1631
www.urbanambiance.com
2 of 4
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to nipple
STEP 1
Slot
Tab
1 2
Install Glass Panel Install Fixture Loop
N
L
N
L
www.urbanambiance.com
3 of 4
STEP 3
2
Step 2 - 3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling: 10.25” Chain
9’ ceiling: 21.25” Chain
10’ ceiling: 32.25” Chain
STEP 4
1 2
Step 1
Feed the fixture wires
through the loop
N
L
N
L
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
www.urbanambiance.com
4 of 4
STEP 5
STEP 6
www.urbanambiance.com
/
