Chapin 81008A User manual

Brand: Chapin

Model: 81008A

Type: User manual

Chapin 81008A is a broadcast spreader used for spreading lawn and garden chemicals, such as fertilizers, seeds, and ice melt. It has an 80-pound capacity and features a durable construction with a steel frame and poly hopper. The Chapin 81008A also includes an adjustable baffle system for controlling the spread pattern and a rain cover to protect the spreader from the elements.

SPREADER Assembly / Operation Instructions / Parts

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Please call 800-950-4458 if you are missing any parts, having trouble assembling, or have any questions regarding the

safe operation of this product.

DO NOT RETURN TO THE STORE

MODEL 81008A/81000A

Carefully Read These Instructions Before Use

IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE

USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

- Do not allow anyone to operate the broadcast spreader without proper instructions

- Do not permit children to operate the broadcast spreader

- Wear protective eyewear and gloves when handling and applying lawn and garden chemicals

- Read the chemical label instructions and warnings for handling and applying the chemicals you plan to

spread – application settings provided are only a guideline

WARNING

012571 R0515

Model 81008A

80 lb. Spreader

Model 81000A

80 lb. Spreader

Suggested Tools:

Wrench and/or Ratchet Set

Approximate assembly time is 5-10 minutes

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

•Removebottomboltfromeachsideof

 handle(belowtriangleshapedthumbscrews)

•LoosenM6Hexnutsandipuphandle

•TightenM6Hexnutscompletely

Handle

Bolts

M6 Hex

Nuts

Figure A

*Note:Ifspringdetachesfrombailassembly,

 simplyre-attach(seeFigureA).

Fully Assembled

WARNING

Auger is designed to work in forward motion. Excessive reverse motion could cause binding. If

resistance is felt while pulling spreader backwards, stop and clear salt from auger.

ASSEMBLY INSTRUCTIONS

Note: Model 81000A Does

not include bafﬂe system.

•Besuregatecontrolisintheclosedposition(donotholdbaildownwhenlling)

•Determineappropriatesettingformaterialbeingusedbyreadingthesuggestedsettingonthematerial’sbag.

 Besuretoreadtheinstructionsonthebag/boxofthematerialyou’respreadingtoidentifyaccuratesettingneeded)

•Tobeginspreading,startwalking(about3mphpace)andpullthebailsystemdowntoopengate

•Tostopspreadingsimplyletgoofthebailandthegatewillclose

GENERAL OPERATING INSTRUCTIONS

STORAGE AND MAINTENANCE

•Whennishedspreadingemptyhopperofanyremainingmaterial

•oroughlywashspreaderandallowtodrybeforestoring

•Tofolddownhandle:

  -Simplyremovethebottomtwoboltsonthehandle

  -LoosentwoM6Hexnutsandfolddownhandle

  -Replacetwobottombolts

  -TightenM6Hexnutscompletely

BAFFLE OPERATING INSTRUCTIONS (model 81008A only)

•Adjustbaebyhandtoblockdistributionaccordingly.Frontandsidescanbeadjustedindependently.

•Usewingnutstoadjusttensiononbaes.

•Screwaugerontoimpellersha.ScrewaugerretainingnutintoaugerholewithM10

 socketdriver.Tightencompletelytosecure.

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

AUGER INSTALLATION (model 81008A only)

GRATE (model 81008A only)

•Ifsaltorspreadingmaterialistoolargeforthegrate,removegratebeforeuse.

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Replacement Parts

Ref.# Qty Part No. Description

1 1 6-9041 Gear Box Assembly

2 1 6-9042 Drive Shaft w/2 bearings

3 1 6-9043 Bail Assembly

4 1 6-9044 Wheels w/hardware & instructions

5 1 6-9045 Hardware Bag

6 1 6-9047 Bafﬂe system

7 1 6-9048 Auger

8 1 6-9049 Grate

9 1 6-9046 Lower link kit

* 1 6-9000 Rain cover

Page is loading ...

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Partes de repuesto

Num. Ref Cant. Num. Parte Descripción

1 1 6-9041 Conjunto de la caja de engranes

2 1 6-9042 Flecha de transmisión c/2 cojinetes

3 1 6-9043 Conjunto de sujeción

4 1 6-9044 Ruedas c/herrajes e instrucciones

5 1 6-9045 Bolsa de herrajes

6 1 6-9047 Sistema de deﬂectores

7 1 6-9048 Taladro

8 1 6-9049 Grate

9 1 6-9046 Lower link kit

* 1 6-9000 Rain cover

Page is loading ...

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458

Pièces de rechange

Nº de réf. Qté Nº de pièce Description

1 1 6-9039 Bloc de la boîte à engrenages

2 1 6-9040 Arbre d’entraînement avec 2 paliers

3 1 6-9019 Bloc de l’étrier

4 1 6-9020 Roues avec matérial et instructions

5 1 6-9022 Sac de matérial

6 1 6-9025 Système de déﬂecteurs

7 1 6-9029 Foreuse

8 1 6-9049 Grate

9 1 6-4046 Lower link kit

* 1 6-9000 Rain cover

Chapin 81008A User manual

Brand: Chapin

Model: 81008A

Type: User manual

Download PDF

report

in other languages

français: Chapin 81008A Manuel utilisateur
español: Chapin 81008A Manual de usuario

Chapin 81008A User manual

Chapin 81008A User manual

in other languages

Related papers

Other documents