feather & black 855-0008 Assembly Instructions

Type
Assembly Instructions
Produced in Viet Nam for Feather&Black 1 www.featherandblack.com
Please retain these assembly intruction for future use
If you require any advice during assembly, please call our customer service team on
01243 380600
W122 x D62 x H200 cm
Product size
Salcombe Wardrobe - Assembly Instruction
feather & black
Thank you for purchasing this Salcombe Wardrobe.
Please read these instructions fully prior to
assembly to familiarise yourself with the various
stages of construction. Carefully open all packs
supplied and check the contents against the parts
and fittings check list.
Do not destroy any of the packaging until you are
certain that you have all the necessary parts for
the assembly.
This item is heavy once assembled. Please try to
assemble the item as close as possible to the
point of use. Take care when moving the item to
avoid personal injury or damage to the product
and always lift rather than drag.
There are small components used in the
construction of this furniture as well as plastic
packaging, these should be kept away from
young children whilst assembling.
Product Safety
All assembly fastenings should always be
tightened properly, and care should be taken to
ensure that no fittings are loose.
Periodically check and ensure that all
components are in their proper position, free
from damage, and that all connectors are tight.
Please note depending on the lighting,
positioning and surroundings of your room, the
shade of the colour can sometimes appear
slightly different. Over a period of time the
colour might lighten or fade slightly due to light
exposure.
Product Care
To clean, slightly moisten cloth with water and
wipe surfaces. A damp cloth holds dust and
prevents damage. repeat with a dry, soft, lint-free
cloth. Do not use abrasives or cleaning products
which may contain ammonia or solvents.
Produced in Viet Nam for Feather&Black 2 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
Missing parts or faulty products
If you are missing any fixtures or fitting
during assembly, or a part is unfortunately
faulty please call our customer service
team on 01243380600
Number of people required to assemble
One people to assemble the product and
two people to lift in to position.
Time to assemble
Before you start
Necessary tools
1 Hour
(1) Top panel Qty: 1pc
Produced in Viet Nam for Feather&Black 3 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
(2) Left side panel Qty: 1pc
(3) Right side panel Qty: 1pc
(4) Center panel Qty: 1pc
Components supplied (not actual size)
1
2
4
6
5
8
7
3
(5) Base Qty: 1pc
(6) Doors Qty: 2pcs
(7) Hanging rail Qty: 1pc
(8) Back frame Qty: 1pc
6
Produced in Viet Nam for Feather&Black 4 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
(9): Allen Bolt
M6X30mm
Qty: 14pcs
Fixtures and fittings supplied (not actual size)
(10): Allen Bolt
M8X40mm
Qty: 10pcs
(11): Allen Bolt
M8X50mm
Qty: 4pcs
(12): Allen Key M4
Qty: 2pcs
(13): Hanger Tip Kit
Qty: 4pcs
(14): Nylon strap
Qty: 2pcs
(15): Screw
M4X35mm
Qty: 4pcs
(16): Screw
M4X15mm
Qty: 4pcs
(17): Plastic Anchors
Ø4x35mm
Qty: 4pcs
(18): Bolt (for handle)
M4X40mm
Qty: 2pcs
(19): Handle
Qty: 2pcs
(20): Dowel wood
Qty: 4pcs
Produced in Viet Nam for Feather&Black 5 www.featherandblack.com
12
Salcombe Wardrobe - Assembly Instruction
feather & black
1
3
Step 1: Use bolt (10) to fix the Right side panel (3) and Left side panel (2) onto
Center panel (4) and Top panel (1) by using Allen Key (12).
10
12
4
2
10
Step 2: Use bolt (9) to insert the Back panel (8) in Wardrobe by using Allen Key (12).
8
9
12
Produced in Viet Nam for Feather&Black 6 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
Step 3 : Assembly the upper Box with Cabinet box
Note: Place the wooden dowel (20) in the correct position. Secure each frame with
Bolt (11), fully tighten with the Allen key (12) provided.
Step 4 : Insert hanging rail (7) into wardrobe
feather & black
12
11
20
7
Produced in Viet Nam for Feather&Black 7 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
Screw driver
(Not supplied)
Insert
Press the hing
Step 5 : Fix doors (6) in by fixing the hinge positive and Sound enabled hinge.
Step 6: Use Bolt (18) to fix the Handles (19) to the Doors.
6
6
19
18
Produced in Viet Nam for Feather&Black 8 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
Moves door forward
or backward
Higes can be adjusted for leveling
the door as drawing shown.
Moves door left
to right
Step 7 : If the doors are not closing all the way or are uneven with each other, use the
adjustment points on each hinge to adjust accordingly,See illustration below.
Produced in Viet Nam for Feather&Black 9 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
Hammer
(Not supplied)
The Wall
17
Screw driver
(Not supplied)
Screw driver
(Not supplied)
13
15
13
16
Step 8:
Produced in Viet Nam for Feather&Black 10 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
Wall
14
Step 9:
Produced in Viet Nam for Feather&Black 11 www.featherandblack.com
Salcombe Wardrobe - Assembly Instruction
feather & black
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

feather & black 855-0008 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI