2. Thermo Fisher Scientific
  3. TaqMan® Low

Thermo Fisher Scientific TaqMan® Low Operating instructions

  • I have read the user manual for the TaqMan Low Density Array RNase P template. This document explains how to correctly import this template file into your SDS software for use with the ABI PRISM 7900HT Sequence Detection System. I can answer your questions regarding the steps to download and add the template to the software.
  • What should I do with my existing RNase P Card Template?
    Where do I place template after downloading?
    Which SDS software versions are supported?
850 Lincoln Centre Drive
Foster City, CA 94404 U.S.A.
T 650.570.6667 F 650.572.2743
www.appliedbiosystems.com
How to import the
TaqMan® Low Density Array RNase P template
The following procedure provides information on how to successfully download and import the
TaqMan® Low Density Array RNase P template for use with SDS software v2.1 and v2.2 of the
ABI PRISM® 7900HT Sequence Detection System.
NOTE: Please do not use your existing “RNase P Card Template” in SDS software v2.2, as it
contains an incorrect plate format.
1. Download the TaqMan® Low Density Array RNase P template file onto the desktop of
your computer.
2. Place the TaqMan® Low Density Array RNase P template file into the “Templates” folder
within the installed directory of your SDS software.
SDS software v2.2 example: SDS software v2.1 example:
Select My Computer and navigate to: Select My Computer and navigate to:
D:\AppliedBiosystems\SDS2.2\Templates D:\Program Files\Applied Biosystems\SDS 2.1\Templates
Note: Ensure that there are no spaces in the
selected “AppliedBiosystems” folder name.
3. You may now proceed to use this template with your 7900HT TaqMan Low Density
Array RNase P kit.
/